Europium(II) Compounds

Europium is a chemical element; it has symbol Eu and atomic number 63. It is a silvery-white metal of the lanthanide series that reacts readily with air to form a dark oxide coating. Europium is the most chemically reactive, least dense, and softest of the lanthanides. It is soft enough to be cut with a knife. Europium was discovered in 1896, provisionally designated as Σ; in 1901, it was named after the continent of Europe. Europium usually assumes the oxidation state +3, like other members of the lanthanide series, but compounds having oxidation state +2 are also common. All europium compounds with oxidation state +2 are slightly reducing. Europium has no significant biological role and is relatively non-toxic compared to other heavy metals. Most applications of europium exploit the phosphorescence of europium compounds. Europium is one of the rarest of the rare-earth elements on Earth.Stwertka, Albert. ''A Guide to the Elements'', Oxford University Press, 1996, p. 156.

Etymology

Its discoverer, Eugène-Anatole Demarçay, named the element after the continent of Europe.

Characteristics

Physical properties

Europium is a ductile metal with a hardness similar to that of lead. It crystallizes in a body-centered cubic lattice. Some properties of europium are strongly influenced by its half-filled electron shell. Europium has the second lowest melting point and the lowest density of all lanthanides.

Chemical properties

Europium is the most reactive rare-earth element. It rapidly oxidizes in air, so that bulk oxidation of a centimeter-sized sample occurs within several days. Its reactivity with water is comparable to that of calcium, and the reaction is
:

Because of the high reactivity, samples of solid europium rarely have the shiny appearance of the fresh metal, even when coated with a protective layer of mineral oil. Europium ignites in air at 150 to 180 °C to form europium(III) oxide:
:

Europium dissolves readily in dilute sulfuric acid to form pale pink solutions of :
:

Eu(II) vs. Eu(III)

Although usually trivalent, europium readily forms divalent compounds. This behavior is unusual for most lanthanides, which almost exclusively form compounds with an oxidation state of +3. The +2 state has an electron configuration 4''f''⁷ because the half-filled ''f''-shell provides more stability. In terms of size and coordination number, europium(II) and barium(II) are similar. The sulfates of both barium and europium(II) are also highly insoluble in water. Divalent europium is a mild reducing agent, oxidizing in air to form Eu(III) compounds. In anaerobic, and particularly geothermal conditions, the divalent form is sufficiently stable that it tends to be incorporated into minerals of calcium and the other alkaline earths. This ion-exchange process is the basis of the "negative europium anomaly", the low europium content in many lanthanide minerals such as monazite, relative to the chondritic abundance. Bastnäsite tends to show less of a negative europium anomaly than does monazite, and hence is the major source of europium today. The development of easy methods to separate divalent europium from the other (trivalent) lanthanides made europium accessible even when present in low concentration, as it usually is.

Isotopes

Naturally occurring europium is composed of two isotopes, ¹⁵¹Eu and ¹⁵³Eu, which occur in almost equal proportions; ¹⁵³Eu is slightly more abundant (52.2% natural abundance). While ¹⁵³Eu is stable, ¹⁵¹Eu was found to be unstable to alpha decay with a half-life of in 2007, giving about one alpha decay per two minutes in every kilogram of natural europium. This value is in reasonable agreement with theoretical predictions. Besides the natural radioisotope ¹⁵¹Eu, 35 artificial radioisotopes have been characterized, the most stable being ¹⁵⁰Eu with a half-life of 36.9 years, ¹⁵²Eu with a half-life of 13.516 years, and ¹⁵⁴Eu with a half-life of 8.593 years. All the remaining radioactive isotopes have half-lives shorter than 4.7612 years, and the majority of these have half-lives shorter than 12.2 seconds; the known isotopes of europium range from ¹³⁰Eu to ¹⁷⁰Eu. This element also has 17 meta states, with the most stable being ^150mEu (''t''_1/2=12.8 hours), ^152m1Eu (''t''_1/2=9.3116 hours) and ^152m2Eu (''t''_1/2=96 minutes).

The primary decay mode for isotopes lighter than ¹⁵³Eu is electron capture, and the primary mode for heavier isotopes is beta minus decay. The primary decay products before ¹⁵³Eu are isotopes of samarium (Sm) and the primary products after are isotopes of gadolinium (Gd).

Europium as a nuclear fission product

Europium is produced by nuclear fission;
¹⁵⁵Eu (half-life 4.7612 years) has a fission yield of 330 parts per million (ppm) for uranium-235 and thermal neutrons.
The fission product yields of europium isotopes are low near the top of the mass range for fission products.

As with other lanthanides, many isotopes of europium, especially those that have odd mass numbers or are neutron-poor like ¹⁵²Eu, have high cross sections for neutron capture, often high enough to be neutron poisons.

¹⁵¹Eu is the beta decay product of samarium-151, but since this has a long decay half-life and short mean time to neutron absorption, most ¹⁵¹Sm instead ends up as ¹⁵²Sm.

¹⁵²Eu (half-life 13.516 years) and ¹⁵⁴Eu (half-life 8.593 years) cannot be beta decay products because ¹⁵²Sm and ¹⁵⁴Sm are non-radioactive, but ¹⁵⁴Eu is the only long-lived "shielded" nuclide, other than ¹³⁴Cs, to have a fission yield of more than 2.5 parts per million fissions. A larger amount of ¹⁵⁴Eu is produced by neutron activation of a significant portion of the non-radioactive ¹⁵³Eu; however, much of this is further converted to ¹⁵⁵Eu.

Occurrence

Europium is not found in nature as a free element. Many minerals contain europium, with the most important sources being bastnäsite, monazite, xenotime and loparite-(Ce). No europium-dominant minerals are known yet, despite a single find of a tiny possible Eu–O or Eu–O–C system phase in the Moon's regolith.

Depletion or enrichment of europium in minerals relative to other rare-earth elements is known as the europium anomaly. Europium is commonly included in trace element studies in geochemistry and petrology to understand the processes that form igneous rocks (rocks that cooled from magma or lava). The nature of the europium anomaly found helps reconstruct the relationships within a suite of igneous rocks. The median crustal abundance of europium is 2 ppm; values of the less abundant elements may vary with location by several orders of magnitude.ABUNDANCE OF ELEMENTS IN THE EARTH’S CRUST AND IN THE SEA, ''CRC Handbook of Chemistry and Physics,'' 97th edition (2016–2017), p. 14-17

Divalent europium (Eu²⁺) in small amounts is the activator of the bright blue fluorescence of some samples of the mineral fluorite (CaF₂). The reduction from Eu³⁺ to Eu²⁺ is induced by irradiation with energetic particles. The most outstanding examples of this originated around Weardale and adjacent parts of northern England; it was the fluorite found here that fluorescence was named after in 1852, although it was not until much later that europium was determined to be the cause.

In astrophysics, the signature of europium in stellar spectra can be used to classify stars and inform theories of how or where a particular star was born. For instance, astronomers used the relative levels of europium to iron within the star LAMOST J112456.61+453531.3 to propose that the accretion process for star occurred late.

Production

Europium is associated with the other rare-earth elements and is, therefore, mined together with them. Separation of the rare-earth elements occurs during later processing. Rare-earth elements are found in the minerals bastnäsite, loparite-(Ce), xenotime, and monazite in mineable quantities. Bastnäsite is a group of related fluorocarbonates, Ln(CO₃)(F,OH). Monazite is a group of related of orthophosphate minerals (Ln denotes a mixture of all the lanthanides except promethium), loparite-(Ce) is an oxide, and xenotime is an orthophosphate (Y,Yb,Er,...)PO₄. Monazite also contains thorium and yttrium, which complicates handling because thorium and its decay products are radioactive. For the extraction from the ore and the isolation of individual lanthanides, several methods have been developed. The choice of method is based on the concentration and composition of the ore and on the distribution of the individual lanthanides in the resulting concentrate. Roasting the ore, followed by acidic and basic leaching, is used mostly to produce a concentrate of lanthanides. If cerium is the dominant lanthanide, then it is converted from cerium(III) to cerium(IV) and then precipitated. Further separation by solvent extractions or ion exchange chromatography yields a fraction which is enriched in europium. This fraction is reduced with zinc, zinc/amalgam, electrolysis or other methods converting the europium(III) to europium(II). Europium(II) reacts in a way similar to that of alkaline earth metals and therefore it can be precipitated as a carbonate or co-precipitated with barium sulfate. Europium metal is available through the electrolysis of a mixture of molten EuCl₃ and NaCl (or CaCl₂) in a graphite cell, which serves as cathode, using graphite as anode. The other product is chlorine gas.

A few large deposits produce or produced a significant amount of the world production. The Bayan Obo iron ore deposit in Inner Mongolia contains significant amounts of bastnäsite and monazite and is, with an estimated 36 million tonnes of rare-earth element oxides, the largest known deposit. The mining operations at the Bayan Obo deposit made China the largest supplier of rare-earth elements in the 1990s. Only 0.2% of the rare-earth element content is europium. The second large source for rare-earth elements between 1965 and its closure in the late 1990s was the Mountain Pass rare earth mine in California. The bastnäsite mined there is especially rich in the light rare-earth elements (La-Gd, Sc, and Y) and contains only 0.1% of europium. Another large source for rare-earth elements is the loparite found on the Kola peninsula. It contains besides niobium, tantalum and titanium up to 30% rare-earth elements and is the largest source for these elements in Russia.

Compounds

Europium compounds tend to exist in a trivalent oxidation state under most conditions. Commonly these compounds feature Eu(III) bound by 6–9 oxygenic ligands. The Eu(III) sulfates, nitrates and chlorides are soluble in water or polar organic solvents. Lipophilic europium complexes often feature acetylacetonate-like ligands, such as EuFOD.

Halides

Europium metal reacts with all the halogens:
:2 Eu + 3 X₂ → 2 EuX₃ (X = F, Cl, Br, I)
This route gives white europium(III) fluoride (EuF₃), yellow europium(III) chloride (EuCl₃), gray europium(III) bromide (EuBr₃), and colorless europium(III) iodide (EuI₃). Europium also forms the corresponding dihalides: yellow-green europium(II) fluoride (EuF₂), colorless europium(II) chloride (EuCl₂) (although it has a bright blue fluorescence under UV light), colorless europium(II) bromide (EuBr₂), and green europium(II) iodide (EuI₂).Holleman, A. F.; Wiberg, E. "Inorganic Chemistry" Academic Press: San Diego, 2001. .

Chalcogenides and pnictides

Europium forms stable compounds with all of the chalcogens, but the heavier chalcogens (S, Se, and Te) stabilize the lower oxidation state. Three oxides are known: europium(II) oxide (EuO), europium(III) oxide (Eu₂O₃), and the mixed-valence oxide Eu₃O₄, consisting of both Eu(II) and Eu(III). Otherwise, the main chalcogenides are europium(II) sulfide (EuS), europium(II) selenide (EuSe) and europium(II) telluride (EuTe): all three of these are black solids. Europium(II) sulfide is prepared by sulfiding the oxide at temperatures sufficiently high to decompose the Eu₂O₃:
:Eu₂O₃ + 3 H₂S → 2 EuS + 3 H₂O + S
The main nitride of europium is europium(III) nitride (EuN).

History

Although europium is present in most of the minerals containing the other rare elements, due to the difficulties in separating the elements it was not until the late 1800s that the element was isolated. William Crookes observed the phosphorescent spectra of the rare elements including those eventually assigned to europium.

Europium was first found in 1892 by Paul Émile Lecoq de Boisbaudran, who obtained basic fractions from samarium-gadolinium concentrates which had spectral lines not accounted for by samarium or gadolinium. However, the discovery of europium is generally credited to French chemist Eugène-Anatole Demarçay, who suspected samples of the recently discovered element samarium were contaminated with an unknown element in 1896 and who was able to isolate it in 1901; he then named it ''europium''.

When the europium-doped yttrium orthovanadate red phosphor was discovered in the early 1960s, and understood to be about to cause a revolution in the color television industry, there was a scramble for the limited supply of europium on hand among the monazite processors, as the typical europium content in monazite is about 0.05%. However, the Molycorp bastnäsite deposit at the Mountain Pass rare earth mine, California, whose lanthanides had an unusually high europium content of 0.1%, was about to come on-line and provide sufficient europium to sustain the industry. Prior to europium, the color-TV red phosphor was very weak, and the other phosphor colors had to be muted, to maintain color balance. With the brilliant red europium phosphor, it was no longer necessary to mute the other colors, and a much brighter color TV picture was the result. Europium has continued to be in use in the TV industry ever since as well as in computer monitors. Californian bastnäsite now faces stiff competition from Bayan Obo, China, with an even "richer" europium content of 0.2%.

Frank Spedding, celebrated for his development of the ion-exchange technology that revolutionized the rare-earth industry in the mid-1950s, once related the story of how he was lecturing on the rare earths in the 1930s, when an elderly gentleman approached him with an offer of a gift of several pounds of europium oxide. This was an unheard-of quantity at the time, and Spedding did not take the man seriously. However, a package duly arrived in the mail, containing several pounds of genuine europium oxide. The elderly gentleman had turned out to be Herbert Newby McCoy, who had developed a famous method of europium purification involving redox chemistry.

Applications

Relative to most other elements, commercial applications for europium are few and rather specialized. Almost invariably, its phosphorescence is exploited, either in the +2 or +3 oxidation state.

It is a dopant in some types of glass in lasers and other optoelectronic devices. Europium oxide (Eu₂O₃) is widely used as a red phosphor in television sets and fluorescent lamps, and as an activator for yttrium-based phosphors. Color TV screens contain between 0.5 and 1 g of europium oxide. Whereas trivalent europium gives red phosphors, the luminescence of divalent europium depends strongly on the composition of the host structure. UV to deep red luminescence can be achieved. The two classes of europium-based phosphor (red and blue), combined with the yellow/green terbium phosphors give "white" light, the color temperature of which can be varied by altering the proportion or specific composition of the individual phosphors. This phosphor system is typically encountered in helical fluorescent light bulbs. Combining the same three classes is one way to make trichromatic systems in TV and computer screens, but as an additive, it can be particularly effective in improving the intensity of red phosphor. Europium is also used in the manufacture of fluorescent glass, increasing the general efficiency of fluorescent lamps. One of the more common persistent after-glow phosphors besides copper-doped zinc sulfide is europium-doped strontium aluminate. Europium fluorescence is used to interrogate biomolecular interactions in drug-discovery screens. It is also used in the anti-counterfeiting phosphors in euro banknotes.

An application that has almost fallen out of use with the introduction of affordable superconducting magnets is the use of europium complexes, such as Eu(fod)₃, as shift reagents in NMR spectroscopy. Chiral shift reagents, such as Eu(hfc)₃, are still used to determine enantiomeric purity.

Europium compounds are used to label antibodies for sensitive detection of antigens in body fluids, a form of immunoassay. When these europium-labeled antibodies bind to specific antigens, the resulting complex can be detected with laser excited fluorescence.

Precautions

There are no clear indications that europium is particularly toxic compared to other heavy metals. Europium chloride, nitrate and oxide have been tested for toxicity: europium chloride shows an acute intraperitoneal LD₅₀ toxicity of 550 mg/kg and the acute oral LD₅₀ toxicity is 5000 mg/kg. Europium nitrate shows a slightly higher intraperitoneal LD₅₀ toxicity of 320 mg/kg, while the oral toxicity is above 5000 mg/kg. The metal dust presents a fire and explosion hazard.

References

External links

It's Elemental – Europium

{{Authority control

Chemical elements
Chemical elements with body-centered cubic structure
Lanthanides
Neutron poisons
Reducing agents