BER encoding
The format for Basic Encoding Rules specifies a self-describing and self-delimiting format for encoding ASN.1 data structures. Each data element is encoded as a type identifier, a length description, the actual data elements, and, where necessary, an end-of-content marker. These types of encodings are commonly called type–length–value (TLV) encodings. However, in BER's terminology, it is ''identifier-length-contents''. This format allows a receiver to decode the ASN.1 information from an incomplete stream, without requiring any pre-knowledge of the size, content, or semantic meaning of the data.Information technology – ASN.1 encoding rules: Specification of Basic Encoding Rules (BER), Canonical Encoding Rules (CER) and Distinguished Encoding Rules (DER)Identifier octets
The BER ''identifier'' octets encode the ASN.1 ''tags''. The list of Universal Class tags can be found at Rec. ITU-T X.680, clause 8, table 1. The following tags are native to ASN.1:Encoding
The identifier octets encode the ASN.1 tag's class number and type number. It also encodes whether the contents octets represent a constructed or primitive value. The Identifier spans one or more octets. In the initial octet, bit 6 encodes whether the type is primitive or constructed, bit 7–8 encode the tag's class, and bits 1–5 encode the tag's type. The following values are possible: If the tag's type fits in the 5-bits (0-3010), then the Identifier spans just one byte: ''Short Form''. If the tag's type is too large for the 5-bit tag field (> 3010), it has to be encoded in further octets: ''Long Form''. The initial octet encodes the class and primitive/constructed as before, and bits 1–5 are 1. The tag number is encoded in the following octets, where bit 8 of each is 1 if there are more octets, and bits 1–7 encode the tag number. The tag number bits combined, big-endian, encode the tag number. The least number of following octets should be encoded; that is, bits 1–7 should not all be 0 in the first following octet.Length octets
There are two forms of the length octets: The definite form and the indefinite form.Definite form
This encodes the number of content octets and is always used if the type is primitive or constructed and data are immediately available. There is a short form and a long form, which can encode different ranges of lengths. Numeric data is encoded as unsigned integers with the least significant bit always first (to the right). The short form consists of a single octet in which bit 8 is 0, and bits 1–7 encode the length (which may be 0) as a number of octets. The long form consists of 1 initial octet followed by 1 or more subsequent octets, containing the length. In the initial octet, bit 8 is 1, and bits 1–7 (excluding the values 0 and 127) encode the number of octets that follow. The following octets encode, as big-endian, the length (which may be 0) as a number of octets.Indefinite form
This does not encode the length at all, but that the content octets finish at marker octets. This applies to constructed types and is typically used if the content is not immediately available at encoding time. It consists of a single octet, in which bit 8 is 1, and bits 1–7 are 0. Then, two end-of-contents octets must terminate the content octets.Contents octets
The contents octets encode the element data value. Note that there may be no contents octets (hence, the element has a length of 0) if only the existence of the ASN.1 object, or its emptiness, is to be noted. For example, this is the case for an ASN.1 NULL value.CER encoding
CER (Canonical Encoding Rules) is a restricted variant ofDER encoding
DER (Distinguished Encoding Rules) is a restricted variant ofBER, CER and DER compared
The key difference between the BER format and the CER or DER formats is the flexibility provided by the Basic Encoding Rules. BER, as explained above, is the basic set of encoding rules given by ITU-T X.690 for the transfer of ASN.1 data structures. It gives senders clear rules for encoding data structures they want to send, but also leaves senders some encoding choices. As stated in the X.690 standard, "Alternative encodings are permitted by the basic encoding rules as a sender's option. Receivers who claim conformance to the basic encoding rules shall support all alternatives". A receiver must be prepared to accept all legal encodings in order to legitimately claim BER-compliance. By contrast, both CER and DER restrict the available length specifications to a single option. As such, CER and DER are restricted forms of BER and serve to disambiguate the BER standard. CER and DER differ in the set of restrictions that they place on the sender. The basic difference between CER and DER is that DER uses definitive length form and CER uses indefinite length form in some precisely defined cases. That is, DER always has leading length information, while CER uses end-of-contents octets instead of providing the length of the encoded data. Because of this, CER requires less metadata for large encoded values, while DER does it for small ones. In order to facilitate a choice between encoding rules, the X.690 standards document provides the following guidance:Criticisms of BER encoding
There is a common perception of BER as being "inefficient" compared to alternative encoding rules. It has been argued by some that this perception is primarily due to poor implementations, not necessarily any inherent flaw in the encoding rules. These implementations rely on the flexibility that BER provides to use encoding logic that is easier to implement, but results in a larger encoded data stream than necessary. Whether this inefficiency is reality or perception, it has led to a number of alternative encoding schemes, such as the Packed Encoding Rules, which attempt to improve on BER performance and size. Other alternative formatting rules, which still provide the flexibility of BER but use alternative encoding schemes, are also being developed. The most popular of these are XML-based alternatives, such as the XML Encoding Rules and ASN.1 SOAP. In addition, there is a standard mapping to convert an XML Schema to an ASN.1 schema, which can then be encoded using BER.ITU-T X.694, ISO/IEC ISO/IEC 8825-5Usage
Despite its perceived problems, BER is a popular format for transmitting data, particularly in systems with different native data encodings. * The SNMP and LDAP protocols specify ASN.1 with BER as their required encoding scheme. * The EMV standard for credit and debit cards uses BER to encode data onto the card * The digital signature standard PKCS #7 also specifies ASN.1 with BER to encode encrypted messages and theirSee also
* Kerberos (protocol), Kerberos * Packed Encoding Rules (PER, X.691) * Presentation layer * Structured Data eXchange Format (References
{{reflistExternal links
* tp://ftp.rsasecurity.com/pub/pkcs/ascii/layman.asc RSA's 'A Layman's Guide to a Subset of ASN.1, BER, and DER 'br>ITU-T X.690, ISO/IEC 8825-1