The Columbia 32 is an American

sailboat A sailboat or sailing boat is a boat propelled partly or entirely by sails and is smaller than a sailing ship. Distinctions in what constitutes a sailing boat and ship vary by region and maritime culture. Types Although sailboat terminology ...

that was designed by William H. Tripp Jr. and first built in 1975. The boat was derived from the shorter Columbia 30. The Columbia 32 design was previously sold by

Coronado Yachts Coronado Yachts was an American sailboat manufacturer located in Southern California Southern California (commonly shortened to SoCal) is a geographic and Cultural area, cultural List of regions of California, region that generally comprises ...

as the Coronado 32, starting in 1973 and was later sold by Sailcrafter as the Sailcrafter 32, commencing in 1977. It was also developed into the

Watkins 32 The Watkins 32 is an American sailboat that was designed by William H. Tripp Jr as a cruiser and first built in 1982.Sherwood, Richard M.: ''A Field Guide to Sailboats of North America, Second Edition'', pages 250-251. Houghton Mifflin Company ...

in 1982.

Production

The design was built by Columbia Yachts in the

United States The United States of America (USA), also known as the United States (U.S.) or America, is a country primarily located in North America. It is a federal republic of 50 U.S. state, states and a federal capital district, Washington, D.C. The 48 ...

from 1975 to 1976, with 80 boats completed, but it is now out of production.

Design

The Columbia 32 is a recreational

keelboat A keelboat is a riverine cargo-capable working boat, or a small- to mid-sized recreational sailing yacht. The boats in the first category have shallow structural keels, and are nearly flat-bottomed and often used leeboards if forced in open w ...

, built predominantly of

fiberglass Fiberglass (American English) or fibreglass (English in the Commonwealth of Nations, Commonwealth English) is a common type of fibre-reinforced plastic, fiber-reinforced plastic using glass fiber. The fibers may be randomly arranged, flattened i ...

, with wood trim. It has a

masthead sloop A masthead rig on a sailing vessel consists of a forestay and backstay both attached at the top of the mast. The Bermuda rig can be split into two groups: the masthead rig and the fractional rig. The masthead rig has larger and more headsails, a ...

rig, a

raked stem The stem is the most forward part of a boat or ship's bow and is an extension of the keel itself. It is often found on wooden boats or ships, but not exclusively. Description The stem is the curved edge stretching from the keel below, up to ...

, an angled transom, a

skeg A skeg (or skegg or skag) is a sternward extension of the keel of boats and ships which have a rudder mounted on the centre line. The term also applies to the lowest point on an outboard motor or the outdrive of an inboard/outboard."A small fin f ...

-mounted

rudder A rudder is a primary control surface used to steer a ship, boat, submarine, hovercraft, airship, or other vehicle that moves through a fluid medium (usually air or water). On an airplane, the rudder is used primarily to counter adverse yaw ...

controlled by a

tiller A tiller or till is a lever used to steer a vehicle. The mechanism is primarily used in watercraft, where it is attached to an outboard motor, rudder post, rudder post or stock to provide leverage in the form of torque for the helmsman to turn ...

and a fixed fin

keel The keel is the bottom-most longitudinal structural element of a watercraft, important for stability. On some sailboats, it may have a fluid dynamics, hydrodynamic and counterbalancing purpose as well. The keel laying, laying of the keel is often ...

. It displaces and carries of ballast. The boat has a draft of with the standard keel fitted. The boat is fitted with a gasoline

inboard motor An inboard motor is a marine propulsion system for boats. As opposed to an outboard motor, where an engine is mounted outside the hull of the craft, an inboard motor is an engine enclosed within the hull of the boat, usually connected to a pro ...

, driving a two-bladed bronze propeller, for docking and maneuvering. The fuel tank holds and the fresh water tank has a capacity of . Below decks the design has a main salon featuring a folding, drop-down table with two settees that can be converted into upper and lower pilot berths. The

galley A galley is a type of ship optimised for propulsion by oars. Galleys were historically used for naval warfare, warfare, Maritime transport, trade, and piracy mostly in the seas surrounding Europe. It developed in the Mediterranean world during ...

has a capacity

icebox An icebox (also called a cold closet) is a compact non-mechanical refrigerator which was a common early-twentieth-century kitchen appliance before the development of safely powered refrigeration devices. Before the development of electric refrig ...

and a

stainless steel Stainless steel, also known as inox, corrosion-resistant steel (CRES), or rustless steel, is an iron-based alloy that contains chromium, making it resistant to rust and corrosion. Stainless steel's resistance to corrosion comes from its chromi ...

sink. The

head A head is the part of an organism which usually includes the ears, brain, forehead, cheeks, chin, eyes, nose, and mouth, each of which aid in various sensory functions such as sight, hearing, smell, and taste. Some very simple ani ...

is fully enclosed. The design has a

hull speed Hull speed or displacement speed is the speed at which the wavelength of a vessel's bow wave is equal to the waterline length of the vessel. As boat speed increases from rest, the wavelength of the bow wave increases, and usually its crest-to- ...

of .

References

{{Columbia Yachts Keelboats 1970s sailboat type designs Sailing yachts Sailboat type designs by William H. Tripp Jr. Sailboat types built by Columbia Yachts

Production

Design

See also

References