Caquot Kite Balloon

Caquot kite balloon (in French ''Caquot Captif'') was a type of non-rigid military observation balloon, designed in 1915 by Albert Caquot. The type became widely used by Allied forces in World War I warfare for multiple observation or naval defence uses and later also as a anti-aircraft barrage balloon.

Design

At the beginning of World War I French Army headquarters quickly realized a need of observation balloon units, which has been dismantled in 1912. German army used their successful Parseval-Sigsfeld kite balloons (or ''Drachen'') in large quantities, so the first French-produced pieces were produced as a copies of a German original.

Being mobilized on 1 August 1914 as a commander of the 21st company of balloonists, French officer Albert Caquot made some aerial observations in a spherical "Fleurus" type balloon, a type dating from 1880s. To balance a balloon dangling even in light winds Caquot designed a new balloon type stabilized by three inflatable rear lobes arranged at 120° angle. In October 1914 he then sent his plans and calculations to the Chalais-Meudon Aeronaitical Factory and after some vicissitudes Caquot's plans, were approved by General Hirschauer responsible for aviation agenda at the French Ministry of War, in February 1915 the first prototype of ''Caquot'' type L kite balloon was finished. Much of the design was taken from Parseval-Sigsfeld kite, but it showed better flight characteristics, like stability and minimal resistance to the wind.

Despite these conclusive tests, mass production was not launched. Thanks to a British Navy officer, present during the tests, Caquot was asked by the British Navy to work on a specific type of kite balloon attached to the ship. Caquot agreed and in summer 1915 finished his M type balloon, able to withstand winds of 125 km/h and equipped with a specific brake which kept the balloon in a certain height. In June 1915, Caquot became the director of the Chalais-Meudon mechanical aerostation workshop, where he was instructed to lead military balloon production by his designs. Between July and the end of November 1916, 46 type M balloons were built in Chalais-Meudon for the British, then the production was retaken by factories in the United Kingdom.

In series production ''Caquot'' balloons were divided to four types, different mostly by its gas capacity:

* P - 750 m3 (capacity - two observers at a height of 500 m)
* P2 - 820 m3
* M2 - 930 m3
* R - 1,000 m3 (capacity - two observers at a height of 1,000 m or three at 500 m)

Operational history

British Navy soon realized the reduction of their ship losses using Caquot kites as an effective observational tool against German and Austro-Hungarian U-boats, in 1917 ''Caquots'' were adapted also by the French Navy, using types P, P2 and R. In July 1918 it has nearly 200 balloons and special balloon 24 units. Until the end of war, French Army forme 76 units equipped with ''Caquot'' balloons, being used for artillery adjustment and general observation of the battlefield. After one of the British Caquot balloons fell into the hands of the Germans around 1917, a German copy signed the Ae 800 (Achthundert English 800).

During the war, from 1915 onwards, France was the leading power in the field of aerostation and built nearly 4,200 captive balloons: 1,700 observation balloons and 2,500 barrage balloons 3, producing 319 units per month in 1919 average. A thousand units served in the U.S. Army between 1918 and 1919, also entered service in other Allied armies and also some of whe newly created, like Polish Army. In the United Kingdom production was restored during World War II, British army was using those until the 1960s for testing parachutes, observation missions and for non-combat aerial photography.

Barrage balloons

In 1917, when the Germans began to attack Paris with bomber planes, Caquot proposed to create barrages with small-volume balloons attached by cables whose would force the bombers to climb higher and reduce their bombing accuracy. This idea was adapted by the British in September 1917 and at the end of the war, there were ten British barrage balloon dams, mainly consisting 900 m3 Caquot M and 1,000 m3 R balloons.

Specifications (R type)

Gallery

The Royal Flying Corps on the Western Front, 1914-1918 Q11909.jpg, British ''Caquot'' balloon falling down in flames after having been attacked by an enemy aircraft near Boyelles, 3 February 1918
File:Aérostation - la manoeuvre du ballon captif - Marasesti - Médiathèque de l'architecture et du patrimoine - AP62T122958.jpg, Romanian ''Caquot'' being raised near Mărășești

See also

*Kite balloon
*Albert Caquot

References

Bibliography

*
*
*

External links

{{Commons category, Caquot kite balloon

1910s French aircraft