Lufthansa Airbus A319 landing at Split Airport

A conventional take-off and landing (CTOL), also known as horizontal take-off and landing (HTOL) is the process whereby conventional

fixed-wing aircraft A fixed-wing aircraft is a heavier-than-air aircraft, such as an airplane, which is capable of flight using aerodynamic lift. Fixed-wing aircraft are distinct from rotary-wing aircraft (in which a rotor mounted on a spinning shaft generate ...

(such as passenger aircraft) take off and

land Land, also known as dry land, ground, or earth, is the solid terrestrial surface of Earth not submerged by the ocean or another body of water. It makes up 29.2% of Earth's surface and includes all continents and islands. Earth's land sur ...

, involving the use of

runway In aviation, a runway is an elongated, rectangular surface designed for the landing and takeoff of an aircraft. Runways may be a human-made surface (often asphalt concrete, asphalt, concrete, or a mixture of both) or a natural surface (sod, ...

s. During takeoff, the aircraft will accelerate along the runway, resting on its wheels, until its

takeoff Takeoff is the phase of flight in which an aerospace vehicle leaves the ground and becomes airborne. For aircraft traveling vertically, this is known as liftoff. For aircraft that take off horizontally, this usually involves starting with a tr ...

speed is reached, at which point the pilot manipulates the flight controls to make the aircraft pivot around the axis of its main

landing gear Landing gear is the undercarriage of an aircraft or spacecraft that is used for taxiing, takeoff or landing. For aircraft, it is generally needed for all three of these. It was also formerly called ''alighting gear'' by some manufacturers, s ...

while still on the ground, this increases the lift from the

wing A wing is a type of fin that produces both Lift (force), lift and drag while moving through air. Wings are defined by two shape characteristics, an airfoil section and a planform (aeronautics), planform. Wing efficiency is expressed as lift-to-d ...

s and effects takeoff. During

landing Landing is the last part of a flight, where a flying animal, aircraft, or spacecraft returns to the ground. When the flying object returns to water, the process is called alighting, although it is commonly called "landing", "touchdown" or " spl ...

s, a commercial passenger-carrying aircraft will arrive over the runway while still at flight speed. The landing consists of the final approach phase, the

flare A flare, also sometimes called a fusée, fusee, or bengala, bengalo in several European countries, is a type of pyrotechnic that produces a bright light or intense heat without an explosion. Flares are used for distress signaling, illuminatio ...

, the touchdown, and roll-out phase.

Seaplane A seaplane is a powered fixed-wing aircraft capable of takeoff, taking off and water landing, landing (alighting) on water.Gunston, "The Cambridge Aerospace Dictionary", 2009. Seaplanes are usually divided into two categories based on their tech ...

s and

amphibious aircraft An amphibious aircraft, or amphibian, is an aircraft that can Takeoff, take off and Landing, land on both solid ground and water. These aircraft are typically Fixed-wing aircraft, fixed-wing, though Amphibious helicopter, amphibious helicopte ...

, instead of using runways, use water.

References

Types of take-off and landing {{aviation-stub

See also

References