Boulangerite

Boulangerite or ''antimonbleiblende'' is an uncommon monoclinic orthorhombic sulfosalt mineral, lead antimony sulfide, formula Pb₅Sb₄S₁₁.Mineralienatlas
/ref> It was named in 1837 in honor of French mining engineer Charles Boulanger (1810–1849),http://www.mindat.org/min-738.html Mindat and had been a valid species since pre- IMA. It was first described prior to 1959, and is now grandfathered.http://webmineral.com/data/Boulangerite.shtml Webmineral data

Properties

Boulangerite was considered to be a really rare mineral until later they found numerous ore deposits of said mineral. Nowadays it is considered as an uncommon mineral, which is rather cheap, with a color of light blue to black to grey. The dust of the mineral is black. Pseudohexagonal shape is common for this mineral. It forms rings rarely. It is the homeotype of lopatkaite. The strong subcell is orthorhombic, and has a halved c. It forms small, elongated prismic or fine, needle-like crystals. Each crystal can grow up to a few centimeters, and crystals can only be told apart in either an enlarged photo or from under a microscope, as it is almost as thin and fine as hair is. One of its unique properties is the parallel fibers to the direction of the elongation, although fibrous-radial, feathery masses are not uncommon as well. In other words, it is plumose, meaning aggregates form plume-like shapes. The latter is the so-called plumosite variant of the mineral, the name derived from the aggregates being plumose, though it can occur in felt-like fibrous or in thick granular clusters as well. The luster of it is always either matte blueish-grey or metallic lead-grey. It is a really heavy, though soft mineral, which is easily breakable, though it cannot be scratched by using fingernails due to the same hardness (2.5–3). The mineral being heavy although being soft is due to its compact mass. The cleavage is generally good. In case of the fibrous type, the fibers are flexible. It is an opaque mineral. The melting point of it is really low, 1 on the Kobell fusibility-scale, which is around 525 in °C. This is the point, where the mineral is the easiest to fuse or at which temperature it melts. It is completely soluble in hydrogen chloride. During the reaction with hydrochloric acid, it creates hydrogen sulfide. In nitric acid, it is partially soluble. It has a distinct anisotropism, and shows weak pleochroic attributes. Common impurities include iron, copper, tin and zinc. It mostly consists of lead (54.88%) thus it can be used as a lead ore, but the other main components are antimony (26.44%) (which is also why the mineral typically forms in antimony deposits) and sulfur (18.68%).

Formation

It typically forms in association of lead, zinc or antimony deposits, in a lodeic environment. It can also be found in company of metamorphic rocks as well, in the Apuan alps as well for instance. The specimens that get formed on these metamorphic rocks appear in the form of fine, crystal needles. It is also usually found with other sulfides as well, like with arsenopyrite, pyrrhotite, galena or sphalerite, but is also can occur with siderites, dolomites and quartzes. It may occur in intergrowths with jamesonite and meneghinite, quartz or sphalerite. Usual finding places include Germany, Switzerland, Canada, the Czech republic, the old Yugoslavia, the Ural region in Russia, and from the british park city mines in Utah. The most known finding places include the Gutin mountains, more specifically Herja, Baia Mare, Baia Sprie, although it appears in greater quantities at the Slovak Ore Mountains (Spišsko-gemerské rudohorie), specifically Čučma and Zlatá Idka. A small few specimens can be found in Hungary, in the Gyöngyösoroszi ore mine, in French at Provence, and as mentioned above, in Italy, it can be found in the tuscan Apuan alps, in the Bottino mine, but it rarely occurs in carrara marble as well.

Identification and usage

At first glance, it is hard to differentiate boulangerite from zinkenite or jamesonite, so proper equipment is crucial for the identification. In the structure, there are interconnected SbS₃ groups like in zinkenite, jamesonite and robinsonite. The smaller, and beautiful needle-like crystals attract a lot of collector's glimpses. As for the economical usage of boulangerite, it can be used up as a lead ore. The usage of said mineral is only reasonable when it appears in extended enough, quarriable deposits.

References

{{Reflist

Lead minerals
Antimony minerals
Sulfosalt minerals
Orthorhombic minerals
Blendes
Minerals in space group 62