The Beneteau Evasion 32 is a French

sailboat A sailboat or sailing boat is a boat propelled partly or entirely by sails and is smaller than a sailing ship. Distinctions in what constitutes a sailing boat and ship vary by region and maritime culture. Types Although sailboat terminology ...

that was designed by

André Bénéteau Beneteau or Bénéteau () is a French sail and motorboat manufacturer, with production facilities in France and in the United States. The company is a large and recognized boat builder, with its holding company (Groupe Beneteau) now also holdin ...

as an

motorsailer A motorsailer is a type of motor-powered Sail, sailing vessel, typically a yacht, that can derive power from its sails or engine, independently from each other during moderate seas or winds. A motorsailer may have a sail-to-engine power ratio in ...

and first built in 1973. The design was the first produced of the series of Evasion motorsailers. It was sold in the United States as the Beneteau M/S 32.

Production

The design was built by

Beneteau Beneteau or Bénéteau () is a French sail and motorboat manufacturer, with production facilities in France and in the United States. The company is a large and recognized boat builder, with its holding company (Groupe Beneteau) now also holdin ...

in France from 1973 to 1981, with 286 boats completed.

Design

The Evasion 32 is a recreational

keelboat A keelboat is a riverine cargo-capable working boat, or a small- to mid-sized recreational sailing yacht. The boats in the first category have shallow structural keels, and are nearly flat-bottomed and often used leeboards if forced in open w ...

, built predominantly of

glassfibre Fiberglass (American English) or fibreglass (Commonwealth English) is a common type of fiber-reinforced plastic using glass fiber. The fibers may be randomly arranged, flattened into a sheet called a chopped strand mat, or woven into glass clo ...

, with wood trim. The hull is solid fibreglass and the deck is

balsa ''Ochroma pyramidale'', commonly known as balsa, is a large, fast-growing tree native to the Americas. It is the sole member of the genus ''Ochroma'', and is classified in the subfamily Bombacoideae of the mallow family Malvaceae. The tree is fa ...

-cored. It has a masthead

staysail A staysail ("stays'l") is a fore-and-aft rigged sail whose luff can be affixed to a stay running forward (and most often but not always downwards) from a mast to the deck, the bowsprit, or to another mast. Description Most staysails a ...

ketch A ketch is a two- masted sailboat whose mainmast is taller than the mizzen mast (or aft-mast), and whose mizzen mast is stepped forward of the rudder post. The mizzen mast stepped forward of the rudder post is what distinguishes the ketch f ...

rig, with a deck-stepped mast, one set of unswept spreaders on each mast and

aluminium Aluminium (or aluminum in North American English) is a chemical element; it has chemical symbol, symbol Al and atomic number 13. It has a density lower than that of other common metals, about one-third that of steel. Aluminium has ...

spars with continuous

stainless steel Stainless steel, also known as inox, corrosion-resistant steel (CRES), or rustless steel, is an iron-based alloy that contains chromium, making it resistant to rust and corrosion. Stainless steel's resistance to corrosion comes from its chromi ...

wire

standing rigging Standing rigging comprises the fixed lines, wires, or rods, which support each mast or bowsprit on a sailing vessel and reinforce those spars against wind loads transferred from the sails. This term is used in contrast to running rigging, w ...

. The hull has a

raked stem The stem is the most forward part of a boat or ship's bow and is an extension of the keel itself. It is often found on wooden boats or ships, but not exclusively. Description The stem is the curved edge stretching from the keel below, up to ...

plumb stem The stem is the most forward part of a boat or ship's bow and is an extension of the keel itself. It is often found on wooden boats or ships, but not exclusively. Description The stem is the curved edge stretching from the keel below, up to ...

, a slightly angled transom, a

keel The keel is the bottom-most longitudinal structural element of a watercraft, important for stability. On some sailboats, it may have a fluid dynamics, hydrodynamic and counterbalancing purpose as well. The keel laying, laying of the keel is often ...

-mounted

rudder A rudder is a primary control surface used to steer a ship, boat, submarine, hovercraft, airship, or other vehicle that moves through a fluid medium (usually air or water). On an airplane, the rudder is used primarily to counter adverse yaw ...

controlled by a

wheel A wheel is a rotating component (typically circular in shape) that is intended to turn on an axle Bearing (mechanical), bearing. The wheel is one of the key components of the wheel and axle which is one of the Simple machine, six simple machin ...

in the wheelhouse and a

tiller A tiller or till is a lever used to steer a vehicle. The mechanism is primarily used in watercraft, where it is attached to an outboard motor, rudder post, rudder post or stock to provide leverage in the form of torque for the helmsman to turn ...

in the cockpit. The boat has a fixed long

and displaces , carrying of

cast iron Cast iron is a class of iron–carbon alloys with a carbon content of more than 2% and silicon content around 1–3%. Its usefulness derives from its relatively low melting temperature. The alloying elements determine the form in which its car ...

ballast. The boat has a draft of with the standard keel. The boat is fitted with a French

Renault Renault S.A., commonly referred to as Groupe Renault ( , , , also known as the Renault Group in English), is a French Multinational corporation, multinational Automotive industry, automobile manufacturer established in 1899. The company curr ...

diesel engine The diesel engine, named after the German engineer Rudolf Diesel, is an internal combustion engine in which Combustion, ignition of diesel fuel is caused by the elevated temperature of the air in the cylinder due to Mechanics, mechanical Compr ...

of for docking and manoeuvring. The fuel tank holds and the

fresh water Fresh water or freshwater is any naturally occurring liquid or frozen water containing low concentrations of dissolved salt (chemistry), salts and other total dissolved solids. The term excludes seawater and brackish water, but it does include ...

tank has a capacity of . The design has sleeping accommodation for six people, with a double

"V"-berth A sleeping berth is a bed or sleeping accommodation on vehicles. Space accommodations have contributed to certain common design elements of berths. Beds in boats or ships While beds on large ships are little different from those on shore, ...

berth in the bow cabin and two U-shaped settees around drop down tables in the main salon and wheelhouse. The

galley A galley is a type of ship optimised for propulsion by oars. Galleys were historically used for naval warfare, warfare, Maritime transport, trade, and piracy mostly in the seas surrounding Europe. It developed in the Mediterranean world during ...

is located on the port side of the main salon in the wheelhouse, just forward of the

companionway In the architecture of a ship, a companion or companionway is a raised and windowed hatchway in the ship's deck, with a ladder leading below and the hooded entrance-hatch to the main cabins. A companionway may be secured by doors or, commonly i ...

ladder. The galley is of straight configuration and is equipped with a two-burner stove, an icebox and a sink. A navigation and steering station is forward of the galley, on the port side, although it lacks a chart table. The

head A head is the part of an organism which usually includes the ears, brain, forehead, cheeks, chin, eyes, nose, and mouth, each of which aid in various sensory functions such as sight, hearing, smell, and taste. Some very simple ani ...

is located on the port side of the salon. Cabin maximum headroom is . For sailing downwind the design may be equipped with a symmetrical

spinnaker A spinnaker is a sail designed specifically for sailing off the wind on courses between a Point of sail#Reaching, reach (wind at 90° to the course) to Point of sail#Running downwind, downwind (course in the same direction as the wind). Spinna ...

of . The design has a

hull speed Hull speed or displacement speed is the speed at which the wavelength of a vessel's bow wave is equal to the waterline length of the vessel. As boat speed increases from rest, the wavelength of the bow wave increases, and usually its crest-to- ...

of .

Operational history

In a 2009 review, ''Yachting Monthly'' reported, "André Bénéteau launched this design in 1973 – the first cruising yacht of any size produced by his company. She was a long-keeled, wheelhouse motorsailer and was, in some ways, ahead of her time." In a 2023 ''SailBoats News'' used boat review, Emmanuel Van Deth wrote, "the particularity of this design is that it is resolutely classic with its ketch rig, its long keel and its interior wheelhouse. Nevertheless, this model has its own personality and still pleases, more than 40 years after its launch! Comfortable, it allows life on board. But the performance under sail is limited. The powerful engine is logically appreciated ... But what is missing? Modern appendages, an open cockpit, a modern rig - everything!"

References

External links

* {{Beneteau Keelboats 1970s sailboat type designs Sailing yachts Motorsailers Sailboat type designs by André Bénéteau Sailboat types built by Beneteau

Production

Design

Operational history

See also

References

External links