HOME

TheInfoList



OR:

BSF is the
callsign In broadcasting and radio communications, a call sign (also known as a call name or call letters—and historically as a call signal—or abbreviated as a call) is a Identifier, unique identifier for a transmitter station. A call sign can be form ...
of the
time signal A time signal is a visible, audible, mechanical, or electronic signal used as a reference to determine the time of day. Church bells or voices announcing hours of prayer gave way to automatically operated chimes on public clocks; however, ...
transmitter owned by the National Time and Frequency Standards Laboratory of the Ministry of Economic Affairs (
Taiwan Taiwan, officially the Republic of China (ROC), is a country in East Asia, at the junction of the East and South China Seas in the northwestern Pacific Ocean, with the People's Republic of China (PRC) to the northwest, Japan to the northe ...
), which transmits
time Time is the continued sequence of existence and events that occurs in an apparently irreversible succession from the past, through the present, into the future. It is a component quantity of various measurements used to sequence events, t ...
information on 77.5 
kHz The hertz (symbol: Hz) is the unit of frequency in the International System of Units (SI), equivalent to one event (or cycle) per second. The hertz is an SI derived unit whose expression in terms of SI base units is s−1, meaning that one h ...
in the
longwave In radio, longwave, long wave or long-wave, and commonly abbreviated LW, refers to parts of the radio spectrum with wavelengths longer than what was originally called the medium-wave broadcasting band. The term is historic, dating from the e ...
range. It was launched on May 1, 1969 and is broadcast from
Zhongli District Zhongli District () is a district in Taoyuan City, Taiwan. Zhongli is spelled variously as ''Jungli'', ''Jongli'', ''Jhongli'' or ''Chungli'' on railway stations, bus stops and road signs. Historically, the city is the site of the Zhongli Incide ...
in
Taichung Taichung (, Wade–Giles: ''Tʻai²-chung¹'', pinyin: ''Táizhōng''), officially Taichung City, is a special municipality located in central Taiwan. Taichung has approximately 2.8 million residents and is the second most populous city of Ta ...
using a
T-antenna A T-antenna, T-aerial, flat-top antenna, or (capacitively) top-loaded antenna is a monopole radio antenna with transverse capacitive loading wires attached to its top. T-antennas are typically used in the VLF, LF, MF, and shortwave bands, a ...
located at . The station used to also transmit on
shortwave Shortwave radio is radio transmission using shortwave (SW) radio frequencies. There is no official definition of the band, but the range always includes all of the high frequency band (HF), which extends from 3 to 30 MHz (100 to 10 m ...
frequencies of and 15 MHz, but this was discontinued due to "low demand" as of July 1, 2004.


Longwave transmitter

The longwave transmitter of the station uses 1  kW of power, achieving an
effective radiated power Effective radiated power (ERP), synonymous with equivalent radiated power, is an IEEE standardized definition of directional radio frequency (RF) power, such as that emitted by a radio transmitter. It is the total power in watts that would ...
of 460 W. Each second, two bits of information are transmitted using
pulse-width modulation Pulse-width modulation (PWM), or pulse-duration modulation (PDM), is a method of reducing the average power delivered by an electrical signal, by effectively chopping it up into discrete parts. The average value of voltage (and current) fed ...
, making 120 bits per minute. The pulses are themselves transmitted once per second via
amplitude-shift keying Amplitude-shift keying (ASK) is a form of amplitude modulation that represents digital data as variations in the amplitude of a carrier wave. In an ASK system, a symbol, representing one or more bits, is sent by transmitting a fixed-amplitude ca ...
similar to other low frequency time signal stations, reducing the carrier amplitude by on the second, and encoding information via the time when it is restored. Uniquely, however, BSF uses five possible times to communicate two data bits per second, or a special synchronization mark: * No reduced power and 1.0 s of full power means SYNC, a synchronization mark * 0.2 seconds of reduced power and 0.8 s of full power means 00 * 0.4 seconds of reduced power and 0.6 s of full power means 01 * 0.6 seconds of reduced power and 0.4 s of full power means 11 * 0.8 seconds of reduced power and 0.2 s of full power means 10 Note that the data is
Gray code The reflected binary code (RBC), also known as reflected binary (RB) or Gray code after Frank Gray, is an ordering of the binary numeral system such that two successive values differ in only one bit (binary digit). For example, the representat ...
d so that confusion between 0.4 and 0.6 seconds of full power will only corrupt one data bit, and thus be detectable by the parity bits. Each minute is divided into two blocks. The first 40 seconds are used to broadcast 76 bits of non-time information (weather, disaster warnings, etc.), and the last 20 seconds are used to broadcast the time, as follows: The minute-of-day and day-of-century blocks each contain an
even parity A parity bit, or check bit, is a bit added to a string of binary code. Parity bits are a simple form of error detecting code. Parity bits are generally applied to the smallest units of a communication protocol, typically 8-bit octets (bytes) ...
bit. Although bits are reserved for
daylight saving time Daylight saving time (DST), also referred to as daylight savings time or simply daylight time (United States, Canada, and Australia), and summer time (United Kingdom, European Union, and others), is the practice of advancing clocks (typical ...
information, they are currently always broadcast as zero, as Taiwan does not observe DST. The time code only includes two digits of year, but it is possible to handle the 400-year leap year cycle in the
Gregorian calendar The Gregorian calendar is the calendar used in most parts of the world. It was introduced in October 1582 by Pope Gregory XIII as a modification of, and replacement for, the Julian calendar. The principal change was to space leap years di ...
using the day of week information.Because the 400-year Gregorian calendar cycle is a multiple of 7 days long, weekdays repeat every 400 years. The date XX00-02-28 must fall on a Monday, Sunday, Friday, or Wednesday. Only the first case is a leap year, followed by Tuesday the 29th. In the other three cases, the next day is March 1. It is not currently clear if the time is transmitted during the minute it encodes (like
WWVB WWVB is a time signal radio station near Fort Collins, Colorado and is operated by the National Institute of Standards and Technology (NIST). Most radio-controlled clocks in North America use WWVB's transmissions to set the correct time. The 70 ...
) or just before (like
DCF77 DCF77 is a German longwave time signal and standard-frequency radio station. It started service as a standard-frequency station on 1 January 1959. In June 1973 date and time information was added. Its primary and backup transmitter are located ...
).


Shortwave transmitter (continued)

Until July 2004, the shortwave transmitter on 5 MHz operated continuously, while that on 15 MHz had an interruption from 35 to 40 minutes after the hour. Except for this, the broadcast repeated every 10 minutes. Each second was marked with a 5 ms tick of 1000 Hz tone,
amplitude modulated Amplitude modulation (AM) is a modulation technique used in electronic communication, most commonly for transmitting messages with a radio wave. In amplitude modulation, the amplitude (signal strength) of the wave is varied in proportion to t ...
. At the start of each minute, the tick was lengthened to 300 ms.
DUT1 DUT1 (sometimes also written DUT) is a time correction equal to the difference between Universal Time ( UT1), which is defined by Earth's rotation, and Coordinated Universal Time (UTC), which is defined by a network of precision atomic clocks. ...
was transmitted by doubling some ticks: seconds :01 through :08 for DUT1 of +0.1 through +0.8 seconds, and seconds :09 through :16 for DUT1 from −0.1 through −0.8 seconds. Each tick was preceded and followed by 40 ms of silence. The remaining "background" was filled on a 10-minute schedule: * For the first 5 minutes (:x0:00 through :x4:59), a background 1000 Hz tone was transmitted. * For the next 4 minutes (:x5:00 through :x8:59), no background tone was transmitted, only the ticks. * During minute 9 (:x9:00 through :x9:59), voice call sign and time announcements were made in
Taiwanese Mandarin Taiwanese Mandarin, ''Guoyu'' ( zh, s=, t=國語, p=Guóyǔ, l=National Language, first=t) or ''Huayu'' ( zh, s=, t=華語, p=Huáyǔ, first=t, l=Mandarin Language, labels=no) refers to Mandarin Chinese spoken in Taiwan. A large majority of the ...
. This schedule repeated every ten minutes, on the hour, except for the previously mentioned 5-minute interruption on 15 MHz.


References


External links

* https://www.meinbergglobal.com/english/glossary/time-signal-transmitter.htm * {{Time measurement and standards Time signal radio stations