Astoria Marine Construction

Astoria Marine Construction (AMCCO) was founded as Astoria Shipbuilding by Joe Dyer is 1929 in Jeffers Gardens of Astoria, Oregon. Joe Dyer's father was a pioneer of early Astoria and operated a family sawmill. Joe Dyer started by building wooden fishing boats at his shipyard. Then added wooden pleasure craft to his product line. Joe Dyer designed and built Columbia River One Design (CROD) boats and boats for the United States Navy. The shipyard was on the east bank of the Lewis and Clark River and the Jeffers Slough. Due to its historical importance the site is on the National Register of Historic Places in Clatsop County, Oregon. Astoria Marine Construction shipyard closed in 2013.

History

Before starting his shipyard, Joe Dyer (1898–1974) was given a contract to build 12 Bristol Bay sailing gill-netters in 1924. Joe Dyer partnered with Acme (Ac) Mansker, and Clair Mansker to build 12 boats, calling the firm Astoria Shipbuilding in 1929. Together they built a new 7.2 acre shipyard. The yard grew, Astoria Shipbuilding built the ''Arrow No. 2'' Astoria's river pilot boat. In 1926 Ac Mansker and his family departed the firm and moved to Puget Sound. Ac Mansker later worked as a superintendent at Bellingham Shipyards and later Todd Shipyards in Seattle. In addition to building wooden boats, Dyer added metal sheet, called ice sheathing to the bows of wooden cargo ships, to protect the hull in iced ports.

Tourist III

In 1931 Dyer received his first large project, the design and construction of a 120-foot car ferry, called the ''Tourist III'' run by Captain Fritz Elving. The ''Tourist III'' operated for the Astoria-North Beach Ferry Company, on the Astoria – North shore route. Dyer leased a shipway at the Port of Astoria to build the large ''Tourist III'' and hired a crew. ''Tourist III'' was built in 90 days, so good a ship it put its rival Columbia Transportation out of action in two years. ''Tourist III'' was long, 233 tons, with a capacity of: 28 automobiles, 280 passengers. ''Tourist III'' ferry service started on July 4, 1931. The ''Tourist III'' Astoria run ended in 1966 as the Astoria – Megler Bridge was built. The ''Tourist III'' was taken to Kodiak, Alaska and was used as a floating crab-processing plant.

Great Depression

Columbia River One Design

The Great Depression was difficult on Astoria Shipbuilding Company, but the firm survived. Columbia River Yachting Association contacted the shipyard to design and build a one-class racing and cruising sloop in 1934. The Columbia River One Design (CROD) became the standard for the Astoria regatta races for the next thirty years. The shipyard built five Columbia River One Design (CROD) and due to the depression sold four CRODs as kits between 1934 and 1940. The second CROD built, CROD No. 2, named ''Jean II'' was sold to Dean Webster of Portland, Oregon, he won first in class in the Pacific International Yachting Association race. After World War II Dyer built three more CRODs, including one for himself Joe's own boat, called ''Tom Tom'' after his son, that was passed down to his son. Astoria Shipbuilding built 12 Columbia River One Design (CROD), the 28-foot sloops became a classic. Columbia River One Design hulls 1 and 2 were donated to the Columbia River Maritime Museum.

*Columbia river one design:
**Length 27.83 feet
**Beam 8.83 feet
**Draft 2.33 feet, Maximum draft 5 feet
**Sail area at max 344 sq. feet
**Monohull keel with centerboard wood
**Waterline length 24 ft
**Displacement 7,000 lbs
**Ballast 950 lbs
**Hull speed 6.56 knots (had back up Westerbeke Universal gasoline engine with 20-gallon tank)

Great depression boats

In 1935, naval architect John Omundse joined the firm. In 1935 Dyer built a 36-foot express cruiser, ''Joanne'', for A. N. Prouty, a local mill owner, also a luxurious 50-footer, ''Phantom'' with twin V-8 for Dr. Wallace Haworth of Portland. In 1938 Dyer built a 47-foot boat the ''Evening Star'' for Portland businessman Milt Henderson. In 1938, Dyer built a 52-foot gaff-rigged schooner, ''Pagan'', for Edward Hefty. In 1938 Astoria Marine won a contract with United States Coast and Geodetic Survey to build an 88-foot survey ship, the '' E Lester Jones'' out of pressure-treated wood. The wood was pressure-treated at a plant in Wauna, Oregon. Heine Dole a new engineer with Astoria Marine was key in overseeing the project.

World War II

To support the World War II effort, Astoria Marine Construction built boats for the United States Navy and United States Army. At its peak in 1943, Astoria Marine Construction had over 1,500 workers. Dyer improved an East Coast Navy designed Minesweepers. Astoria Shipbuilding Company won on April 1, 1941, a $1,312,000 contract to build four minesweepers. Astoria Marine Construction built a new shipyard for the minesweeper assembly line at a Port of Astoria facility. Other orders were given to Astoria Shipbuilding. Astoria Marine operated three-yard during the war: Lewis and Clark River, Astoria Port Docks,
and Tongue Point yard. Astoria Marine also converted 50 escort carriers and 56 ammunition ships for the war efforts.

For the US Navy Astoria Marine Construction built:
* YMS-1 type 137-foot Minesweepers
*YMS-135 subclass Minesweepers, like USS Osprey (AMS-28) and USS Minah (AMc-204)
*YP 623 type 128-foot Patrol Craft, like PCS 1465


For the US Army Astoria Marine Construction built:
* MTL Tugboats a Type V ship ''Motor Launch''
*World War II boats:

Post War II

Astoria Marine Construction built 79-foot trawlers including the ''Trask'' and the ''Shirley Lee''. Astoria Marine Construction built a 58-foot seiner without an order and took two years to sell. Dyer built a CROD, the ''Tom Tom'' for himself in 1945. Astoria Marine Construction worked the reserve fleet at Tongue Point. For the Navy, and National Defense Reserve Fleet, Astoria Marine Construction worked on "mothballing" ships and boats. Astoria Marine was able to rent two Auxiliary Repair Docks (ARD) Auxiliary floating drydock to repair large ships and boats. NOAAS ''Oregon'' was built in 1946 under a US contract with Reconstruction Finance Corporation, to help with the shortage of fishing boats after the war. Many good fishing boats had been used for patrol boats. In 1949 she was acquired by the United States Department of the Interior for fish and wildlife work. In 1970 ''Oregon'' was acquired by the National Oceanic and Atmospheric Administration (NOAA) and used the ''Oregon'' for 10 years.Anonymous, "AFSC Historical Corner: ''Oregon'', RFC Exploratory Fishing Fleet Vessel," noaa.gov, undated Retrieved August 22, 2018
/ref>

Korean War

Astoria Marine Construction won the contract to build new Agile-class minesweeper minesweepers with less iron (non-magnetic), less likely to set off new naval mines used in the Korean War. The first contract was for two ships, AM 480, the USS ''Dash'', and AM 481, the USS ''Detector'' with aluminum engines. Next Astoria Marine Construction received an order for three more '' Onversaagd-class minesweepers'' for the Royal Netherlands Navy. Astoria Marine de-mothballed ships and boats in the reserve fleet, so they could be used for the war. After the war the yard built fishing vessels and tug boats and repaired boats. In 1957 Astoria Marine Construction built the grand 39-foot Cutter Yacht ''Patronilla'', for Bill Forrest. In 1966 the last grand Yacht built was the 39 -foot, ''Jeanne Elizabeth'', for Leah Pierce.

*Korean War ships:

Joseph M. Dyer

Joseph M. Dyer was born in 1898, in South Bend, Washington. His father ran a small family sawmill. The family moved to Astoria, Oregon on Columbia River when Joe was young. His father became the manager of Clatsop Mill on Scow Bay at 13th and Exchange Street. His father died when Joe was fourteen in 1912. As a young boy, Joe would hang around Tim Driscoll's boat shop a lower Columbia River boat builder, and fell in love with boat building. Tim L. Driscoll (1870–1967) taught Joe skills he would use later, Driscoll's father-in-law was a Clatsop Indian canoe builder, his father was an English seaman. Driscoll was known for his bowpicker boats, which Dyer would later build also. At 18 Joe joined the United States Navy Reserve and was sent to war. For World War I he serviced on the USS ''Goldsborough'' a torpedo boat. He was trained on the ''Goldsborough'' and then became a trainer of other new sailors as the ''Goldsborough'' patrol the Pacific Northwest coast. In 1918, after the war, Joe took Mechanical Engineering classes at Oregon Agricultural College, now called Oregon State University, and worked repairing fish boats in the summer. He designed buildings that replaced ones lost in the 1922 Astoria, Oregon fire. In 1924, Joe Dyer partnered with the Mansker brothers and started the shipyard. Dyer married Genevieve (Geno) Thompson in 1929, they built a house across the road from the shipyard. Dyer retired in 1964, at age 66, he turned the operations of the shipyard over to the employees. In 1968, he sold the shipyard to its employees, who that wanted to buy it. At the request of a friend, he helped build one last boat, the ''Mary Carol'', a motor yacht for Ed Ross, an advertising executive. Don Fastabend, who started work at the yard in 1950, was the last of the employees who owned part of the shipyard and ran the yard as a boat repair shop. Fastabend, the last owner of the yard, died in October 2013, the yard closed in 2013. The shipyard records were donated to the Columbia River Maritime Museum.

In addition to being a boat builder, Joe Dyer held office in the Oregon legislature. He was a chairman in the local United Way. For his civic work, he was awarded the Astoria's First Citizen Award. Joe Dyer also served as the first chairman of the Oregon State Marine Board. The Board worked with state regulations on pleasure boat activity and safety. Joe Dyer helped start the Columbia River Maritime Museum. Joe died in 1974 at age 76, his wife Geno died in 1983. Dyer's had a son Thomas R. Dyer, who worked in Seattle at a marine consultancy firm and sailed his dad's boat CROD No. 10, ''Tom Tom''. Thomas was Sea Scout, for his group he restored 26-foot whaleboat, later Tom and the yard built a 14-foot Blue Jay for the group. Tom and the yard built a six 8-foot El Toro that used local yacht club members, some used in El Toro championship races in Youngs Bay.Joseph M. Dyer, Astoria Oregon: Culture, Tales and History by Stig M. Johannessen, March 29, 2013

The site of the shipyard is on the List of Oregon's Most Endangered Places.

See also

* List of auxiliaries of the United States Navy
* Wooden boats of World War 2

External links

Airal photo of shipyardPhoto of a Columbia River One Design boatPhoto of Tourist III ferryPhoto of Merrimac

References

{{Authority control

Defunct shipbuilding companies of the United States
1929 establishments in Florida
American companies established in 1929
American shipbuilders
1929 establishments in Oregon
National Register of Historic Places in Astoria, Oregon
Historic district contributing properties in Oregon
Commercial buildings on the National Register of Historic Places in Oregon