algebraic chess notation

Algebraic notation is the standard method of chess notation, used for recording and describing moves. It is based on a system of coordinates to identify each square on the board uniquely. It is now almost universally used by books, magazines, newspapers and software, and is the only form of notation recognized by FIDE, the international chess governing body.

An early form of algebraic notation was invented by the Syrian player Philip Stamma in the 18th century. In the 19th century, it came into general use in German chess literature and was subsequently adopted in Russian chess literature. Descriptive notation, based on abbreviated natural language, was generally used in English language chess publications until the 1980s. Similar descriptive systems were in use in Spain and France. A few players still use descriptive notation, but it is no longer recognized by FIDE, and may not be used as evidence in the event of a dispute.

The term "algebraic notation" may be considered a misnomer, as the system is unrelated to algebra.

Naming the squares

Each square of the board is identified by a unique coordinate pair—a letter and a number—from White's point of view. The vertical columns of squares, called ', are labeled ''a'' through ''h'' from White's left (the ) to right (the ). The horizontal rows of squares, called ', are numbered ''1'' to ''8'' starting from White's side of the board. Thus each square has a unique identification of file letter followed by rank number. For example, the initial square of White's king is designated as "e1".

Naming the pieces

Each piece type (other than pawns) is identified by an uppercase letter. English-speaking players use the letters ''K'' for king, ''Q'' for queen, ''R'' for rook, ''B'' for bishop and ''N'' for knight. Different initial letters are used by other languages.

In modern chess literature, especially that intended for an international audience, the language-specific letters are usually replaced by universally recognized piece symbols; for example, ♞c6 in place of Nc6. This style is known as ''figurine algebraic notation''. The Unicode Miscellaneous Symbols set includes all the symbols necessary for figurine algebraic notation.

Notation for moves

In standard (or short-form) algebraic notation, each move of a piece is indicated by the piece's uppercase letter, plus the coordinates of the destination square. For example, Be5 (bishop moves to e5), Nf3 (knight moves to f3). For pawn moves, a letter indicating pawn is not used, only the destination square is given. For example, c5 (pawn moves to c5).

Captures

When a piece makes a , an "x" is inserted immediately before the destination square. For example, Bxe5 (bishop captures the piece on e5). When a pawn makes a capture, the from which the pawn departed is used to identify the pawn. For example, exd5 (pawn on the e-file captures the piece on d5).

''En passant'' captures are indicated by specifying the capturing pawn's file of departure, the "x", the destination square (not the square of the captured pawn) and (optionally) the suffix "e.p." indicating the capture was ''en passant''. For example, exd6 e.p.

Sometimes a multiplication sign (×) or a colon (:) is used instead of "x", either in the middle (B:e5) or at the end (Be5:). Some publications, such as the ''Encyclopaedia of Chess Openings'' (''ECO''), omit any indication that a capture has been made; for example, Be5 instead of Bxe5; ed6 instead of exd6 or exd6 e.p.

When it is unambiguous to do so, a pawn capture is sometimes described by specifying only the files involved (exd or even ed). These shortened forms are sometimes called ''abbreviated algebraic notation'' or ''minimal algebraic notation''.

Disambiguating moves

When two (or more) identical pieces can move to the same square, the moving piece is uniquely identified by specifying the piece's letter, followed by (in descending order of preference):
# the file of departure (if they differ);
# the rank of departure (if the files are the same but the ranks differ).

If neither file nor rank alone is sufficient to identify the piece (such as when three or more pieces of the same type can move to the same square), then both are specified (double disambiguation).

In the diagram, both black rooks could legally move to f8, so the move of the d8-rook to f8 is disambiguated as Rdf8. For the white rooks on the a-file which could both move to a3, it is necessary to provide the of the moving piece, i.e., R1a3.

In the case of the white queen on h4 moving to e1, neither the rank nor file alone are sufficient to disambiguate from the other white queens. As such, this move is written Qh4e1.

As above, an "x" can be inserted to indicate a capture; for example, if the final case were a capture, it would be written as Qh4xe1.

Pawn promotion

When a pawn promotes, the piece promoted to is indicated at the end. For example, a pawn on e7 promoting to a queen on e8 may be variously rendered as e8Q, e8=Q, e8(Q), e8/Q etc.

Castling

Castling is indicated by the special notations 0-0 (for castling) and 0-0-0 ( castling). O-O and O-O-O (letter O rather than digit 0) are also commonly used.

Check

A move that places the opponent's king in check usually has the symbol "+" appended. Alternatively, sometimes a dagger (†) or the abbreviation "ch" is used. Some publications indicate a discovered check with an abbreviation such as "dis ch", or with a specific symbol. Double check is usually indicated the same as check, but is sometimes represented specifically as "dbl ch" or "++", particularly in older chess literature. Some publications such as ''ECO'' omit any indication of check.

Checkmate

Checkmate at the completion of moves is represented by the symbol "#" in standard FIDE notation and PGN. The word ''mate'' is commonly used instead; occasionally a double dagger () or a double plus sign (++) is used, although the double plus sign is also used to represent " double check" when a king is under attack by two enemy pieces simultaneously. A checkmate is represented by "" (the not equal sign) in the macOS chess application. In Russian and ex-USSR publications, where captures are indicated by ":", checkmate can also be represented by "X" or "x".

Draw offer

FIDE specifies draw offers to be recorded by an equals sign with parentheses "(=)" after the move on the . This is not usually included in published game scores.

End of game

The notation 1–0 at the completion of moves indicates that White won, 0–1 indicates that Black won and ½–½ indicates a draw. In case of , the scores 0–0, ½–0 and 0–½ are also possible. In case of loss by default, results are +/−, −/+ or −/−.

Except in the case of checkmate, there is no information in the notation regarding the circumstance of the final result. Merely 1–0 or 0–1 is written whether a player resigned, lost due to time control or forfeited; in the case of a draw ½–½ is written whether the draw was decided by mutual agreement, repetition, stalemate, 50-move rule or dead position. Sometimes direct information is given by words such as "resigns", "draw agreed" etc., but this is not considered part of the notation, rather a part of the narrative text.

Similar notations

Besides standard (or short form) algebraic notation already described, several similar systems have been used.

Long algebraic notation

In long algebraic notation, also known as fully expanded algebraic notation, both the starting and ending squares are specified, for example: e2e4. Sometimes these are separated by a hyphen, e.g. Nb1-c3, while captures are indicated by an "x", e.g. Rd3xd7. Long algebraic notation takes more space and is no longer commonly used in print; however, it has the advantage of clarity. Both short and long algebraic notation are acceptable for keeping a record of the moves on a scoresheet, as is required in FIDE rated games.

A form of long algebraic notation (without piece names) is also used by the Universal Chess Interface (UCI) standard, which is a common way for graphical chess programs to communicate with chess engines, e.g. e2e4, e1g1 (castling), e7e8q (promotion).

ICCF numeric notation

In international correspondence chess the use of algebraic notation may cause confusion, since different languages employ different names (and therefore different initial letters) for the pieces, and some players may be unfamiliar with the Latin alphabet. Hence, the standard for transmitting moves by post or email is ICCF numeric notation, which identifies squares using numerical coordinates, and identifies both the departure and destination squares. For example, the move 1.e4 is rendered as 1.5254. In recent years, the majority of correspondence games have been played on on-line servers rather than by email or post, leading to a decline in the use of ICCF numeric notation.

PGN

Portable Game Notation (PGN) is a text-based file format for storing chess games, which uses standard English algebraic notation and a small amount of markup. PGN can be processed by almost all chess software, as well as being easily readable by humans. For example, the Game of the Century could be represented as follows in PGN:

Formatting

A game or series of moves is generally written in one of two ways; in two columns, as White/Black pairs, preceded by the move number and a period:
:1. e4 e5
:2. Nf3 Nc6
:3. Bb5 a6
or horizontally:
:1. e4 e5 2. Nf3 Nc6 3. Bb5 a6
Moves may be interspersed with commentary, called ''annotations''. When the resumes with a Black move, an ellipsis (...) fills the position of the White move, for example:
:1. e4 e5 2. Nf3
::White attacks the black e-pawn.
:2... Nc6
::Black defends and develops simultaneously.
:3. Bb5
::White plays the Ruy Lopez.
:3... a6
::Black elects Morphy's Defense.

Annotation symbols

Though not technically a part of algebraic notation, the following are some symbols commonly used by annotators, for example in publications ''Chess Informant'' and ''Encyclopaedia of Chess Openings'', to give editorial comment on a move or position.

The symbol chosen is appended to the end of the move notation, for example, in the Soller Gambit: 1.d4 e5?! 2.dxe5 f6 3.e4! Nc6 4.Bc4+/−.

Moves

Positions

History

Descriptive notation was usual in the Middle Ages in Europe. A form of algebraic chess notation that seems to have been borrowed from Muslim chess, however, appeared in Europe in a 12th-century manuscript referred to as "MS. Paris Fr. 1173 (PP.)". The files run from ''a'' to ''h'', just as they do in the current standard algebraic notation. The ranks, however, are also designated by letters, with the exception of the 8th rank which is distinct because it has no letter. The ranks are lettered in reverse – from the 7th to the 1st: ''k'', ''l'', ''m'', ''n'', ''o'', ''p'', ''q''.

Another system of notation using only letters appears in a book of Mediaeval chess, Rechenmeister Jacob Köbel's ''Schachzabel Spiel'' of 1520.

Algebraic notation exists in various forms and languages and is based on a system developed by Philipp Stamma in the 1730s. Stamma used the modern names of the squares (and may have been the first to number the ranks), but he used ''p'' for pawn moves and the capital original of a piece (''A'' through ''H'') instead of the initial letter of the piece name as used now. Piece letters were introduced in the 1780s by Moses Hirschel, and Johann Allgaier with Aaron Alexandre developed the modern castling notation in the 1810s.

Algebraic notation was described in 1847 by Howard Staunton in his book ''The Chess-Player's Handbook''. Staunton credits the idea to German authors, and in particular to "Alexandre, Jaenisch and the '' Handbuch'' ". While algebraic notation has been used in German and Russian chess literature since the 19th century, the Anglosphere was slow to adopt it, using descriptive notation for much of the 20th century. Beginning in the 1970s, algebraic notation gradually became more common in English language publications, and by 1980 it had become the prevalent notation. In 1981, FIDE stopped recognizing descriptive notation, and algebraic notation became the accepted international standard.

File:Ms. Paris 1173.png, Chess diagram found in a French manuscript (1173)
File:Jacob Köbel 1520.png, Chess diagram from Jacob Köbel's German book about Mediaeval chess, ''Schachzabel Spiel'' (1520)
File:Chess diagram from Howard Staunton's "The Chess-Player's Handbook" (1947).png, Chess diagram showing algebraic notation in Howard Staunton's ''The Chess-Player's Handbook'' (1866)

Piece names in various languages

The table contains names for all the pieces as well as the words for , and in several languages.Sources for this section include Wikipedia articles in various languages
Archived
2009-10-25. Several languages use the Arabic loanword ''alfil'' for the piece called ''bishop'' in English; in this context it is a chess-specific term which no longer has its original meaning of "elephant".

See also

* Chess notation
* Chess annotation symbols

Notes

References

External links

FIDE Laws of Chess
(see Appendix C. Algebraic Notation)

{{chess, sp=us

Chess notation