The ASC or Admiralty Sailing Craft (sometimes incorrectly called Admiralty Sea Cadet) is a purpose-built, rugged GRP or wood

sailing dinghy Dinghy sailing is the activity of sailing small boats - usually for fun, learning necessary sailing skills (often also within family), and competition. RYA lists Five essentials of sailing dinghies as: * The sails * The hydrofoil, foils (i.e. t ...

, historically with

gunter rig Gunter rig is a configuration of sail and spars used in sailing. It is a Fore-and-aft rig, fore and aft sail set abaft (behind) the mast. The lower half of the luff (front) of the sail is attached to the mast, and the upper half is fastened to ...

, with a

Bermuda rig Bermuda rig, Bermudian rig, or Marconi rig is a type of sailing rig that uses a triangular sail set abaft (behind) the mast. It is the typical configuration for most modern sailboats. Whilst commonly seen in sloop-rigged vessels, Bermuda rig is ...

optional, designed for use by UK naval and

sea cadet Sea cadets are members of a cadets youth program sponsored by a national naval service, aimed for young people with an interest in waterborne activities and or the national navy. The organisation may be sponsored in whole or in part by the navy or ...

establishments as a pulling or sailing dinghy. It is a substantial craft, usually left on a

mooring A mooring is any permanent structure to which a seaborne vessel (such as a boat, ship, or amphibious aircraft) may be secured. Examples include quays, wharfs, jetties, piers, anchor buoys, and mooring buoys. A ship is secured to a mooring to ...

in quiet waters rather than being

slipway A slipway, also known as boat ramp or launch or boat deployer, is a ramp on the shore by which ships or boats can be moved to and from the water. They are used for building and repairing ships and boats, and for launching and retrieving smal ...

launched. It is intended for a total crew of up to 8 although it can be sculled single-handed. It has a heavy metal centreplate, and is equipped for pulling in addition to sailing. There is also a

sculling Sculling is the use of oars to propel a boat by moving them through the water on both sides of the craft, or moving one oar over the stern. A long, narrow boat with sliding seats, rigged with two oars per rower may be referred to as a scull, its ...

notch on the transom. This type of boat is gradually being phased out of the Sea Cadets due to the production of the new Trinity 500 rowing boats. As of 2012, ASCs are no longer in use on cadet courses, and have been completely replaced by trinity 500s

Notes

Dinghies {{ship-type-stub