An add-drop multiplexer (ADM) is an important element of an

optical fiber An optical fiber, or optical fibre in Commonwealth English, is a flexible, transparency and translucency, transparent fiber made by Drawing (manufacturing), drawing glass (silica) or plastic to a diameter slightly thicker than that of a Hair ...

network. A

multiplexer In electronics, a multiplexer (or mux; spelled sometimes as multiplexor), also known as a data selector, is a device that selects between several analog or digital input signals and forwards the selected input to a single output line. The sel ...

combines, or multiplexes, several lower- bandwidth streams of data into a single beam of

light Light or visible light is electromagnetic radiation that can be perceived by the human eye. Visible light is usually defined as having wavelengths in the range of 400–700 nanometres (nm), corresponding to frequencies of 750–420 te ...

. An ''add-drop'' multiplexer also has the capability to ''add'' one or more lower-bandwidth signals to an existing high-bandwidth data stream, and at the same time can extract or ''drop'' other low-bandwidth signals, removing them from the stream and redirecting them to some other network path. This is used as a local "on-ramp" and "off-ramp" to the high-speed network. ADMs can be used both in long-haul core networks and in shorter-distance "

metro Metro, short for metropolitan, may refer to: Geography * Metro (city), a city in Indonesia * A metropolitan area, the populated region including and surrounding an urban center Public transport * Rapid transit, a passenger railway in an urban ...

" networks, although the former are much more expensive due to the difficulty of scaling the technology to the high data rates and

dense wavelength division multiplexing In fiber-optic communications, wavelength-division multiplexing (WDM) is a technology which multiplexes a number of optical carrier signals onto a single optical fiber by using different wavelengths (i.e., colors) of laser light. This techniq ...

(DWDM) used for long-haul communications. The main optical filtering technology used in add-drop multiplexers is the Fabry–Pérot etalon. Newer "multi-service

SONET/SDH Synchronous optical networking (SONET) and synchronous digital hierarchy (SDH) are standardized protocols that transfer multiple digital bit streams synchronously over optical fiber using lasers or highly coherent light from light-emitting ...

" (also known as a multi-service provisioning platform or MSPP) equipment has all the capabilities of legacy ADMs, but can also include cross-connect functionality to manage multiple fiber rings in a single chassis. These devices can replace multiple legacy ADMs and also allow connections directly from

Ethernet Ethernet () is a family of wired computer networking technologies commonly used in local area networks (LAN), metropolitan area networks (MAN) and wide area networks (WAN). It was commercially introduced in 1980 and first standardized in ...

LANs to a service provider's optical backbone. At the end of 2003, sales of multiservice ADMs exceeded those of legacy ADMs for the first time, as the change to next-generation SONET/SDH networks accelerated. An emerging variety of ADMs that is becoming popular as the carriers continue to invest in metro optical networks are

reconfigurable optical add-drop multiplexer In fiber optics, a reconfigurable optical add-drop multiplexer (ROADM) is a form of optical add-drop multiplexer that adds the ability to remotely switch traffic from a wavelength-division multiplexing (WDM) system at the wavelength layer. This is a ...

s (ROADMs).

References

Telecommunications equipment {{telecom-stub