三

Chinese numerals are words and characters used to denote numbers in written Chinese.

Today, speakers of Chinese languages use three written numeral systems: the system of Arabic numerals used worldwide, and two indigenous systems. The more familiar indigenous system is based on Chinese characters that correspond to numerals in the spoken language. These may be shared with other languages of the Chinese cultural sphere such as Korean, Japanese, and Vietnamese. Most people and institutions in China primarily use the Arabic or mixed Arabic-Chinese systems for convenience, with traditional Chinese numerals used in finance, mainly for writing amounts on cheques, banknotes, some ceremonial occasions, some boxes, and on commercials.

The other indigenous system consists of the Suzhou numerals, or ''huama'', a positional system, the only surviving form of the rod numerals. These were once used by Chinese mathematicians, and later by merchants in Chinese markets, such as those in Hong Kong until the 1990s, but were gradually supplanted by Arabic numerals.

Basic counting in Chinese

The Chinese character numeral system consists of the Chinese characters used by the Chinese written language to write spoken numerals. Similar to spelling-out numbers in English (e.g., "one thousand nine hundred forty-five"), it is not an independent system ''per se''. Since it reflects spoken language, it does not use the positional system as in Arabic numerals, in the same way that spelling out numbers in English does not.

Ordinary numerals

There are characters representing the numbers zero through nine, and other characters representing larger numbers such as tens, hundreds, thousands, ten thousands and hundred millions. There are two sets of characters for Chinese numerals: one for everyday writing, known as (), and one for use in commercial, accounting or financial contexts, known as ( or 'capital numbers'). The latter were developed by Wu Zetian () and were further refined by the Hongwu Emperor (). They arose because the characters used for writing numerals are geometrically simple, so simply using those numerals cannot prevent forgeries in the same way spelling numbers out in English would. A forger could easily change the everyday characters (30) to (5000) just by adding a few strokes. That would not be possible when writing using the financial characters (30) and (5000). They are also referred to as "banker's numerals" or "anti-fraud numerals". For the same reason, rod numerals were never used in commercial records.

1. Wugniu is a pan-Wu romanization scheme, but the exact romanization depends on the variety. The romanization listed here is specifically for Shanghainese.

Regional usage

Powers of 10

Large numbers

For numbers larger than 10,000, similarly to the long and short scales in the West, there have been four systems in ancient and modern usage. The original one, with unique names for all powers of ten up to the 14th, is ascribed to the Yellow Emperor in the 6th century book by Zhen Luan, . In modern Chinese, only the second system is used, in which the same ancient names are used, but each represents a myriad, times the previous:

In practice, this situation does not lead to ambiguity, with the exception of , which means 10¹² according to the system in common usage throughout the Chinese communities as well as in Japan and Korea, but has also been used for 10⁶ in recent years (especially in mainland China for megabyte). To avoid problems arising from the ambiguity, the PRC government never uses this character in official documents, but uses ) or instead. Partly due to this, combinations of and are often used instead of the larger units of the traditional system as well, for example instead of . The ROC government in Taiwan uses to mean 10¹² in official documents.

Large numbers from Buddhism

Numerals beyond zǎi come from Buddhist texts in Sanskrit, but are mostly found in ancient texts. Some of the following words are still being used today, but may have transferred meanings.

Small numbers

The following are characters used to denote small order of magnitude in Chinese historically. With the introduction of SI units, some of them have been incorporated as SI prefixes, while the rest have fallen into disuse.

Small numbers from Buddhism

SI prefixes

In the People's Republic of China, the early translation for the SI prefixes in 1981 was different from those used today. The larger (, , , , ) and smaller Chinese numerals (, , , , ) were defined as translation for the SI prefixes as ''mega'', ''giga'', ''tera'', ''peta'', ''exa'', ''micro'', ''nano'', ''pico'', ''femto'', ''atto'', resulting in the creation of yet more values for each numeral.1981 Gazette of the State Council of the People's Republic of China

No. 365
, page 575, Table 7: SI prefixes

The Republic of China (Taiwan) defined as the translation for ''mega'' and as the translation for ''tera''. This translation is widely used in official documents, academic communities, informational industries, etc. However, the civil broadcasting industries sometimes use to represent "megahertz".

Today, the governments of both China and Taiwan use phonetic transliterations for the SI prefixes. However, the governments have each chosen different Chinese characters for certain prefixes. The following table lists the two different standards together with the early translation.

Reading and transcribing numbers

Whole numbers

Multiple-digit numbers are constructed using a multiplicative principle; first the digit itself (from 1 to 9), then the place (such as 10 or 100); then the next digit.

In Mandarin, the multiplier (''liǎng'') is often used rather than for all numbers 200 and greater with the "2" numeral (although as noted earlier this varies from dialect to dialect and person to person). Use of both or are acceptable for the number 200. When writing in the Cantonese dialect, is used to represent the "2" numeral for all numbers. In the southern Min dialect of Chaozhou ( Teochew), (''no⁶'') is used to represent the "2" numeral in all numbers from 200 onwards. Thus:

For the numbers 11 through 19, the leading 'one' ( zh, c=, s=, t=, p=yī, labels=no) is usually omitted. In some dialects, like Shanghainese, when there are only two significant digits in the number, the leading 'one' and the trailing zeroes are omitted. Sometimes, the one before "ten" in the middle of a number, such as 213, is omitted. Thus:

Notes:
# Nothing is ever omitted in large and more complicated numbers such as this.

In certain older texts like the Protestant Bible, or in poetic usage, numbers such as 114 may be ''written'' as 00 0 ().

Outside of Taiwan, digits are sometimes grouped by myriads instead of thousands. Hence it is more convenient to think of numbers here as in groups of four, thus 1,234,567,890 is regrouped here as 12,3456,7890. Larger than a myriad, each number is therefore four zeroes longer than the one before it, thus 10000 × = . If one of the numbers is between 10 and 19, the leading 'one' is omitted as per the above point. Hence (numbers in parentheses indicate that the number has been written as one number rather than expanded):

In Taiwan, pure Arabic numerals are officially always and only grouped by thousands. Unofficially, they are often not grouped, particularly for numbers below 100,000. Mixed Arabic-Chinese numerals are often used in order to denote myriads. This is used both officially and unofficially, and come in a variety of styles:

Interior zeroes before the unit position (as in 1002) must be spelt explicitly. The reason for this is that trailing zeroes (as in 1200) are often omitted as shorthand, so ambiguity occurs. One zero is sufficient to resolve the ambiguity. Where the zero is before a digit other than the units digit, the explicit zero is not ambiguous and is therefore optional, but preferred. Thus:

Fractional values

To construct a fraction, the denominator is written first, followed by , then the literary possessive particle , and lastly the numerator. This is the opposite of how fractions are read in English, which is numerator first. Each half of the fraction is written the same as a whole number. For example, to express "two thirds", the structure "three parts of-this two" is used. Mixed numbers are written with the whole-number part first, followed by , then the fractional part.

Percentages are constructed similarly, using as the denominator. (The number 100 is typically expressed as , like the English 'one hundred'. However, for percentages, is used on its own.)

Because percentages and other fractions are formulated the same, Chinese are more likely than not to express 10%, 20% etc. as 'parts of 10' (or , , etc. i.e. ; , ; , etc.) rather than "parts of 100" (or , , etc. i.e. ; , ; , etc.)

In Taiwan, the most common formation of percentages in the spoken language is the number per hundred followed by the word , a contraction of the Japanese ; , itself taken from 'percent'. Thus 25% is ; .

Decimal numbers are constructed by first writing the whole number part, then inserting a point (), and finally the fractional part. The fractional part is expressed using only the numbers for 0 to 9, similarly to English.

functions as a number and therefore requires a measure word. For example: .

Ordinal numbers

Ordinal numbers are formed by adding before the number.

The Heavenly Stems are a traditional Chinese ordinal system.

Negative numbers

Negative numbers are formed by adding before the number.

Usage

Chinese grammar requires the use of classifiers (measure words) when a numeral is used together with a noun to express a quantity. For example, "three people" is expressed as , "three ( particle) person", where / ' is a classifier. There exist many different classifiers, for use with different sets of nouns, although / is the most common, and may be used informally in place of other classifiers.

Chinese uses cardinal numbers in certain situations in which English would use ordinals. For example, (literally "three story/storey") means "third floor" ("second floor" in British ). Likewise, (literally "twenty-one century") is used for "21st century".

Numbers of years are commonly spoken as a sequence of digits, as in ("two zero zero one") for the year 2001. Names of months and days (in the Western system) are also expressed using numbers: ("one month") for January, etc.; and ("week one") for Monday, etc. There is only one exception: Sunday is , or informally , both literally "week day". When meaning "week", "" and "" are interchangeable. "" or "" means "day of worship". Chinese Catholics call Sunday "" ', "Lord's day".

Full dates are usually written in the format 2001年1月20日 for January 20, 2001 (using "year", "month", and "day") – all the numbers are read as cardinals, not ordinals, with no leading zeroes, and the year is read as a sequence of digits. For brevity the , and may be dropped to give a date composed of just numbers. For example "6-4" in Chinese is "six-four", short for "month six, day four" i.e. June Fourth, a common Chinese shorthand for the 1989 Tiananmen Square protests (because of the violence that occurred on June 4). For another example 67, in Chinese is sixty seven, short for year nineteen sixty seven, a common Chinese shorthand for the Hong Kong 1967 leftist riots.

Counting rod and Suzhou numerals

In the same way that Roman numerals were standard in ancient and medieval Europe for mathematics and commerce, the Chinese formerly used the rod numerals, which is a positional system. The Suzhou numerals ( zh, t=蘇州花碼 , s=苏州花码 , p=Sūzhōu huāmǎ) system is a variation of the Southern Song rod numerals. Nowadays, the ''huāmǎ'' system is only used for displaying prices in Chinese markets or on traditional handwritten invoices.

Hand gestures

There is a common method of using of one hand to signify the numbers one to ten. While the five digits on one hand can easily express the numbers one to five, six to ten have special signs that can be used in commerce or day-to-day communication.

Historical use of numerals in China

Most Chinese numerals of later periods were descendants of the Shang dynasty oracle numerals of the 14th century BC. The oracle bone script numerals were found on tortoise shell and animal bones. In early civilizations, the Shang were able to express any numbers, however large, with only nine symbols and a counting board though it was still not positional.

Some of the bronze script numerals such as 1, 2, 3, 4, 10, 11, 12, and 13 became part of the system of rod numerals.

In this system, horizontal rod numbers are used for the tens, thousands, hundred thousands etc. It is written in ''Sunzi Suanjing'' that "one is vertical, ten is horizontal".

The counting rod numerals system has place value and decimal numerals for computation, and was used widely by Chinese merchants, mathematicians and astronomers from the Han dynasty to the 16th century.

Alexander Wylie, Christian missionary to China, in 1853 already refuted the notion that "the Chinese numbers were written in words at length", and stated that in ancient China, calculation was carried out by means of counting rods, and "the written character is evidently a rude presentation of these". After being introduced to the rod numerals, he said "Having thus obtained a simple but effective system of figures, we find the Chinese in actual use of a method of notation depending on the theory of local value .e. place-value several centuries before such theory was understood in Europe, and while yet the science of numbers had scarcely dawned among the Arabs."Alexander Wylie, ''Jottings on the Sciences of the Chinese, North Chinese Herald, 1853, Shanghai''

During the Ming and Qing dynasties (after Arabic numerals were introduced into China), some Chinese mathematicians used Chinese numeral characters as positional system digits. After the Qing period, both the Chinese numeral characters and the Suzhou numerals were replaced by Arabic numerals in mathematical writings.

Cultural influences

Traditional Chinese numeric characters are also used in Japan and Korea and were used in Vietnam before the 20th century. In vertical text (that is, read top to bottom), using characters for numbers is the norm, while in horizontal text, Arabic numerals are most common. Chinese numeric characters are also used in much the same formal or decorative fashion that Roman numerals are in Western cultures. Chinese numerals may appear together with Arabic numbers on the same sign or document.

See also

* Numbers in Chinese culture
* Celestial stem

Notes

References

{{Chinese language

Numerals
Numerals
Chinese mathematics