|
Rated Voltage
A rating plate on a machine carries information about its operational limits. The plate frequently contains the names of the machine and its manufacturer, so the rating plate is often called a name plate (hence the term "nameplate capacity" for a generator), although many devices carry separate nameplates and rating plates. For an electric machine, the power rating is the number on its rating plate and corresponds to a maximum electric load it can carry. There is a distinction between the ''continuous rating'' (for generators, continuous maximum rating or CMR), at which the machine can be operational without a time limit and short-term rating that can only be used for a specified amount of time. Generators A typical electrical generator rating plate contains the following parameters: * ''power rating'' is specified in terms of apparent power (KVA or MVA), since the exact power factor will be determined by the external factors; * ''power factor'' (PF) is the nominal power factor ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Rating Plate On The Dalchonzie Power Station Generator - Geograph
A rating is an evaluation or assessment of something, in terms of quality, quantity, or some combination of both. Rating or ratings may also refer to: Business and economics * Credit rating, estimating the credit worthiness of an individual, corporation or country * Ranally city rating system, a tool used to classify U.S. cities based on economic function * Telecommunications rating, the calculated cost of a phone call Entertainment * Arbitron ratings or Nielsen Audio, consumer research on radio broadcasting audiences in the United States * Content rating, the suitability of a TV broadcast, movie, comic book, or video game to its audience ** Motion picture rating system, categorizes films according to their suitability for adults and children ** Television content rating systems, categorizes TV shows based on suitability for audiences ** Video game content rating system, categorizes video games based on suitability for players * Nielsen ratings, measuring viewership of United ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
IP Code
The IP code or ingress protection code indicates how well a device is protected against water and dust. It defined by the International Electrotechnical Commission (IEC) under the international standard IEC 60529 which classifies and provides a guideline to the degree of protection provided by mechanical casings and electrical enclosures against intrusion, dust, accidental contact, and water. It is published in the European Union by the European Committee for Electrotechnical Standardization (CENELEC) as EN 60529. The standard aims to provide users more detailed information than vague marketing terms such as ''waterproof''. For example, a cellular phone rated at IP67 is "dust resistant" and can be "immersed in 1 meters of freshwater for up to 30 minutes". Similarly, an electrical socket rated IP22 is protected against insertion of fingers and will not become unsafe during a specified test in which it is exposed to vertically or nearly vertically dripping water. ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Star And Delta Connection
A star is an astronomical object comprising a luminous spheroid of plasma held together by its gravity. The nearest star to Earth is the Sun. Many other stars are visible to the naked eye at night, but their immense distances from Earth make them appear as fixed points of light. The most prominent stars have been categorised into constellations and asterisms, and many of the brightest stars have proper names. Astronomers have assembled star catalogues that identify the known stars and provide standardized stellar designations. The observable universe contains an estimated to stars. Only about 4,000 of these stars are visible to the naked eye, all within the Milky Way galaxy. A star's life begins with the gravitational collapse of a gaseous nebula of material composed primarily of hydrogen, along with helium and trace amounts of heavier elements. Its total mass is the main factor determining its evolution and eventual fate. A star shines for most of its active life du ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Prime Mover (engine Or Motor)
An engine or motor is a machine designed to convert one or more forms of energy into mechanical energy. Available energy sources include potential energy (e.g. energy of the Earth's gravitational field as exploited in hydroelectric power generation), heat energy (e.g. geothermal), chemical energy, electric potential and nuclear energy (from nuclear fission or nuclear fusion). Many of these processes generate heat as an intermediate energy form, so heat engines have special importance. Some natural processes, such as atmospheric convection cells convert environmental heat into motion (e.g. in the form of rising air currents). Mechanical energy is of particular importance in transportation, but also plays a role in many industrial processes such as cutting, grinding, crushing, and mixing. Mechanical heat engines convert heat into work via various thermodynamic processes. The internal combustion engine is perhaps the most common example of a mechanical heat engine, in which h ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Rotational Speed
Rotational frequency (also known as rotational speed or rate of rotation) of an object rotating around an axis is the frequency of rotation of the object. Its unit is revolution per minute (rpm), cycle per second (cps), etc. The symbol for rotational frequency is \nu (the Greek lowercase letter nu). Tangential speed ''v'', rotational frequency \nu, and radial distance ''r'', are related by the following equation: :v = 2\pi r\nu :v = r\omega An algebraic rearrangement of this equation allows us to solve for rotational frequency: :\nu = v/2\pi r :\omega = v/r Thus, the tangential speed will be directly proportional to ''r'' when all parts of a system simultaneously have the same ''ω'', as for a wheel, disk, or rigid wand. The direct proportionality of ''v'' to ''r'' is not valid for the planets, because the planets have different rotational frequencies. Rotational frequency can measure, for example, how fast a motor is running. ''Rotational speed'' is sometimes used to ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Line Frequency
The utility frequency, (power) line frequency (American English) or mains frequency (British English) is the nominal frequency of the oscillations of alternating current (AC) in a wide area synchronous grid transmitted from a power station to the end-user. In large parts of the world this is 50 Hz, although in the Americas and parts of Asia it is typically 60 Hz. Current usage by country or region is given in the list of mains electricity by country. During the development of commercial electric power systems in the late-19th and early-20th centuries, many different frequencies (and voltages) had been used. Large investment in equipment at one frequency made standardization a slow process. However, as of the turn of the 21st century, places that now use the 50 Hz frequency tend to use 220–240 V, and those that now use 60 Hz tend to use 100–127 V. Both frequencies coexist today (Japan uses both) with no great technical reason to prefer one over ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Phase Voltage
Three-phase electric power (abbreviated 3φ) is a common type of alternating current used in electricity generation, transmission, and distribution. It is a type of polyphase system employing three wires (or four including an optional neutral return wire) and is the most common method used by electrical grids worldwide to transfer power. Three-phase electrical power was developed in the 1880s by multiple people. Three-phase power works by the voltage and currents being 120 degrees out of phase on the three wires. As an AC system it allows the voltages to be easily stepped up using transformers to high voltage for transmission, and back down for distribution, giving high efficiency. A three-wire three-phase circuit is usually more economical than an equivalent two-wire single-phase circuit at the same line to ground voltage because it uses less conductor material to transmit a given amount of electrical power. Three-phase power is mainly used directly to power large induction mo ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Primary Coil
A transformer is a passive component that transfers electrical energy from one electrical circuit to another circuit, or multiple circuits. A varying current in any coil of the transformer produces a varying magnetic flux in the transformer's core, which induces a varying electromotive force (EMF) across any other coils wound around the same core. Electrical energy can be transferred between separate coils without a metallic (conductive) connection between the two circuits. Faraday's law of induction, discovered in 1831, describes the induced voltage effect in any coil due to a changing magnetic flux encircled by the coil. Transformers are used to change AC voltage levels, such transformers being termed step-up or step-down type to increase or decrease voltage level, respectively. Transformers can also be used to provide galvanic isolation between circuits as well as to couple stages of signal-processing circuits. Since the invention of the first constant-potential transform ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Name Plate
A nameplate identifies and displays a person or product's name. Nameplates are usually shaped as rectangles but are also seen in other shapes, sometimes taking on the shape of someone's written name. Nameplates primarily serve an informative function (as in an office environment, where nameplates mounted on doors or walls identify employees' spaces) or a commercial role (as in a retail environment, where nameplates are mounted on products to identify the brand). Whereas name tags tend to be worn on uniforms or clothing, nameplates tend to be mounted onto an object (e.g. cars, amplification devices) or physical space (e.g. doors, walls, or desktops). Nameplates are also distinct from name plaques. Plaques have larger dimensions and aim to communicate more information than a name and title. Office nameplates Office nameplates generally are made out of plastic, wood, metals (stainless steel, brass, aluminium, zinc, copper) and usually contain one or two lines of text. Th ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Insulation Class
The electrical insulation system for wires used in generators, electric motors, transformers, and other wire-wound electrical components is divided into different classes by temperature and temperature rise. The electrical insulation system is sometimes referred to as ''insulation class'' or ''thermal classification''. The different classes are defined by NEMA, Underwriters Laboratories (UL), and IEC standards. For complete electrically operated appliances, the "insulation system" is the overall design of electrical insulation of the energized components to ensure correct function of the device and protection of the user from electric shock. Temperature classes The maximum hot-spot operating temperature is reached by adding the rated ambient temperature of the machine (often 40 °C), a temperature rise, and a 10 °C hot-spot allowance. Electrical machines are usually designed with an average temperature below the rated hot-spot temperature to allow for acceptable life. ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Power Factor
In electrical engineering, the power factor of an AC power system is defined as the ratio of the '' real power'' absorbed by the load to the '' apparent power'' flowing in the circuit. Real power is the average of the instantaneous product of voltage and current and represents the capacity of the electricity for performing work. Apparent power is the product of RMS current and voltage. Due to energy stored in the load and returned to the source, or due to a non-linear load that distorts the wave shape of the current drawn from the source, the apparent power may be greater than the real power, so more current flows in the circuit than would be required to transfer real power alone. A power factor magnitude of less than one indicates the voltage and current are not in phase, reducing the average product of the two. A negative power factor occurs when the device (which is normally the load) generates real power, which then flows back towards the source. In an electric power sys ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
.jpg "Click for more on -> IP Code")
