|
Phase-shifter
A phase angle regulating transformer, phase angle regulator (PAR, American usage), phase-shifting transformer, phase shifter (American usage), or quadrature booster (quad booster, British usage), is a specialised form of transformer used to control the flow of real power on three-phase electric transmission networks. For an alternating current transmission line, power flow through the line is proportional to the sine of the difference in the phase angle of the voltage between the transmitting end and the receiving end of the line. Where parallel circuits with different capacities exist between two points in a transmission grid (for example, an overhead line and an underground cable), direct manipulation of the phase angle allows control of the division of power flow between the paths, preventing overload. Quadrature boosters thus provide a means of relieving overloads on heavily laden circuits and re-routing power via more favorable paths. Alternately, where an interchange partne ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Electric Power Transmission
Electric power transmission is the bulk movement of electrical energy from a generating site, such as a power plant, to an electrical substation. The interconnected lines that facilitate this movement form a ''transmission network''. This is distinct from the local wiring between high-voltage substations and customers, which is typically referred to as electric power distribution. The combined transmission and distribution network is part of electricity delivery, known as the electrical grid. Efficient long-distance transmission of electric power requires high voltages. This reduces the losses produced by strong currents. Transmission lines use either alternating current (AC) or direct current (DC). The voltage level is changed with transformers. The voltage is stepped up for transmission, then reduced for local distribution. A wide area synchronous grid, known as an ''interconnection'' in North America, directly connects generators delivering AC power with the same rela ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
ELIA PST Monceau 400MVA
Elia is a name which may be a variant of the names Elias, Elijah, Eli or Eliahu, and may refer to: People * Aelia (gens) or Elia, a ''gens'' of Ancient Rome Mononymic * Elia or Elijah, a biblical prophet * Elia, a pen-name of Charles Lamb Given name *Elia Abu Madi, (1890–1957), Lebanese poet *Elia Barceló (born 1957), Spanish writer *Elia Goode Byington (1858–1936), American journalist *Elia Cmíral (born 1950), Czech film composer *Elia Dalla Costa (1872–1961), Italian cardinal and Archbishop of Florence *Elia del Medigo (1458–1493), Greek rabbi *Elia Favilli (born 1989), Italian cyclist *Elia Frosio (1913–2005), Italian cyclist * Elia Galera (born 1973), Spanish actress * Elia Kaiyamo (born 1951), Namibian politician *Elia Kazan (1909–2003), American director and producer *Elia Legati (born 1986), Italian football player *Elia Levita (1469–1549), German Hebrew scholar *Elia Liut (1894–1952), Italian aviator *Elia Luini (born 1979), Italian rower *Elia Millos ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Electrical Network
An electrical network is an interconnection of electrical components (e.g., batteries, resistors, inductors, capacitors, switches, transistors) or a model of such an interconnection, consisting of electrical elements (e.g., voltage sources, current sources, resistances, inductances, capacitances). An electrical circuit is a network consisting of a closed loop, giving a return path for the current. Thus all circuits are networks, but not all networks are circuits (although networks without a closed loop are often referred to as "open circuits"). A resistive network is a network containing only resistors and ideal current and voltage sources. Analysis of resistive networks is less complicated than analysis of networks containing capacitors and inductors. If the sources are constant ( DC) sources, the result is a DC network. The effective resistance and current distribution properties of arbitrary resistor networks can be modeled in terms of their graph measures and g ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Induction Regulator
An induction regulator is an alternating current electrical machine, somewhat similar to an induction motor, which can provide a continuously variable output voltage. The induction regulator was an early device used to control the voltage of electric networks. Since the 1930s it has been replaced in distribution network applications by the tap transformer. Its usage is now mostly confined to electrical laboratories, electrochemical processes and arc welding. With minor variations, its setup can be used as a phase-shifting power transformer. Construction A single-phase induction regulator has a (primary) excitation winding, connected to the supply voltage, wound on a magnetic core which can be rotated. The stationary secondary winding is connected in series with the circuit to be regulated. As the excitation winding is rotated through 180 degrees, the voltage induced in the series winding changes from adding to the supply voltage to opposing it. By selection of the ratios of the ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Hradec Substation
Hradec substation () is a Electrical substation#Collector substation, collector substation connecting the 220 kV and 400 kV grid in the Czech Republic's electricity grid. It is situated in Rokle near its local part Hradec in the Ústí nad Labem Region. Description In Hradec the high voltage transmission lines from the surrounding lignite-fired power stations come together and the distribution of load takes place. Hradec is starting point of two high voltage transmission lines to Germany, a 400 kV line to Chemnitz#Administrative divisions, Röhrsdorf in Saxony and a 400 kV line to GKK Etzenricht, Etzenricht in Bavaria. The transmission capacity of the line to Röhrsdorf, which went into service during 1976, is 2640 MW. The 220 kV link to Zwönitz, which was built in the 1950s, no longer exists. There are direct 400 kV interconnections from the substation to Tušimice Power Station, Tušimice and Prunéřov Power Station, Prunéřov power stations. The 400 kV line to Etzenricht is ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Quad Booster
QUaD, an acronym for QUEST at DASI, was a ground-based cosmic microwave background (CMB) polarization experiment at the South Pole. QUEST (Q and U Extragalactic Sub-mm Telescope) was the original name attributed to the bolometer detector instrument, while DASI is a famous CMB interferometry experiment credited with the first detection of CMB polarization. QUaD used the existing DASI mechanical infrastructure but replaced the DASI interferometric array with a bolometer detector at the end of a cassegrain optical system. The mount has housed the Keck Array since 2011. See also * Cosmic microwave background radiation * Cosmic microwave background experiments This list is a compilation of experiments measuring the cosmic microwave background radiation, cosmic microwave background (CMB) radiation anisotropies and polarization since the first detection of the CMB by Arno Allan Penzias, Penzias and Rob ... References External links * http://www.stanford.edu/~schurch/quad.htm ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Transmission Line
In electrical engineering, a transmission line is a specialized cable or other structure designed to conduct electromagnetic waves in a contained manner. The term applies when the conductors are long enough that the wave nature of the transmission must be taken into account. This applies especially to radio-frequency engineering because the short wavelengths mean that wave phenomena arise over very short distances (this can be as short as millimetres depending on frequency). However, the Telegrapher's equations, theory of transmission lines was historically developed to explain phenomena on very long electrical telegraph, telegraph lines, especially submarine telegraph cables. Transmission lines are used for purposes such as connecting Transmitter, radio transmitters and Radio receiver, receivers with their antenna (radio), antennas (they are then called feed lines or feeders), distributing cable television signals, trunking, trunklines routing calls between telephone switchi ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
One-line Diagram
In power engineering, a single-line diagram (SLD), also sometimes called one-line diagram, is a simplest symbolic representation of an electric power system. A single line in the diagram typically corresponds to more than one physical conductor: in a direct current system the line includes the supply and return paths, in a three-phase system the line represents all three phases (the conductors are both supply and return due to the nature of the alternating current circuits). The single-line diagram has its largest application in power flow studies. Electrical elements such as circuit breakers, transformers, capacitors, bus bars, and conductors are shown by standardized schematic symbols. Instead of representing each of three phases with a separate line or terminal, only one conductor is represented. It is a form of block diagram graphically depicting the paths for power flow between entities of the system. Elements on the diagram do not represent the physical size or loca ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Tap (transformer)
In electrical engineering, a transformer is a passive component that transfers electrical energy from one electrical circuit to another circuit, or multiple Electrical network, circuits. A varying current in any coil of the transformer produces a varying magnetic flux in the transformer's core, which induces a varying electromotive force, electromotive force (EMF) across any other coils wound around the same core. Electrical energy can be transferred between separate coils without a metallic (conductive) connection between the two circuits. Faraday's law of induction, discovered in 1831, describes the induced voltage effect in any coil due to a changing magnetic flux encircled by the coil. Transformers are used to change Alternating current, AC voltage levels, such transformers being termed step-up or step-down type to increase or decrease voltage level, respectively. Transformers can also be used to provide galvanic isolation between circuits as well as to couple stages of signa ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Vector Sum
In mathematics, physics, and engineering, a Euclidean vector or simply a vector (sometimes called a geometric vector or spatial vector) is a geometric object that has magnitude (or length) and direction. Euclidean vectors can be added and scaled to form a vector space. A '' vector quantity'' is a vector-valued physical quantity, including units of measurement and possibly a support, formulated as a '' directed line segment''. A vector is frequently depicted graphically as an arrow connecting an ''initial point'' ''A'' with a ''terminal point'' ''B'', and denoted by \stackrel \longrightarrow. A vector is what is needed to "carry" the point ''A'' to the point ''B''; the Latin word means 'carrier'. It was first used by 18th century astronomers investigating planetary revolution around the Sun. The magnitude of the vector is the distance between the two points, and the direction refers to the direction of displacement from ''A'' to ''B''. Many algebraic operations on real numb ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
