Multifunctional Enzyme
   HOME





Multifunctional Enzyme
Multi-function(al) describes something that is capable of performing multiple functions or serving various purposes effectively. Specifically, it may refer to: * Multi-function structure *Multifunctional furniture *Multi-function printer (aka 'multifunctional' in a narrower sense) *Multi-tool *Multi-function display *Multi-touch *Multi-Functional Transport Satellite *Multifunctional Information Distribution System *Multifunctional Support Ship See also *Multifunction Polis The Multifunction Polis (MFP) was a controversial scheme for a planned community in Australia proposed in 1987 and abandoned in 1998. From the Greek word ''polis'', meaning "city", it was imagined as a place where work and leisure, lifetime educ ... * Multi-use * Versatility * * {{disambiguation ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


Multi-function Structure
A multi-function material is a composite material. The traditional approach to the development of structures is to address the load-carrying function and other functional requirements separately. Recently, however, there has been increased interest in the development of load-bearing materials and structures which have integral non-load-bearing functions, guided by recent discoveries about how multifunctional biological systems work. Introduction With conventional structural materials, it has been difficult to achieve simultaneous improvement in multiple structural functions, but the increasing use of composite materials has been driven in part by the potential for such improvements. The multi-functions can vary from mechanical to electrical and thermal functions. The most widely used composites have polymer matrix materials, which are typically poor conductors. Enhanced conductivity could be achieved with reinforcing the composite with carbon nanotubes for instance. Functions Among ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

Multifunctional Furniture
Multifunctional furniture is furniture with several functions combined. The functions combined vary, but a common variant is to incorporate an extra storage function into chair, tables, and so forth, making them so-called storage furniture. It more efficiently uses up living space. Lack of space can be an important reason for choosing such furniture, but combination furniture is also seen in larger homes for more space-efficient utilization. Historically, furniture with transforming mechanisms was called "mechanical furniture". Examples Some common examples of multifunctional furniture are: * Chair-table, a table where the tabletop can be hinged to form the back of a seat to serve as a chair, if necessary * Chest-chair, a type of chair where the seat doubles as the lid of a chest for storage * Chest-table, a chest used as a table, with storage space underneath a hinged tabletop. Today more commonly seen as coffee tables, since people's legs do not usually rest underneath such t ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

Multi-function Printer
An MFP (multi-function product/printer/peripheral), multi-functional, all-in-one (AIO), or multi-function device (MFD), is an office machine which incorporates the functionality of multiple devices in one, so as to have a smaller footprint in a home or small business setting (the Small office/home office, SOHO market segment), or to provide centralized document management/distribution/production in a large-office setting. A typical MFP may act as a combination of some or all of the following devices: email, fax, photocopier, Printer (computing), printer, Image scanner, scanner. Types of MFPs MFP manufacturers traditionally divided MFPs into various segments. The segments roughly divided the MFPs according to their speed in pages-per-minute (ppm) and duty-cycle/robustness. However, many manufacturers are beginning to avoid the segment definition for their products, as speed and basic functionality alone do not always differentiate the many features that the devices includ ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

Multi-tool
A multi-tool (or multitool) is a hand tool that combines several individual functions in a single unit. The smallest are credit-card or key sized units designed for carrying in a wallet or on a keyring, but others are designed to be carried in a trouser pocket or belt-mounted pouch. History The idea of incorporating several tools in one unit is very old, dating back at least as far as Middle Roman times. Many of these were used for eating. Pocket knives Among the earliest contemporary examples is the Swiss Army knife, as supplied by makers Victorinox and Wenger. The actual version supplied to the Swiss army includes a knife blade, a reamer, a bottle-opener–screwdriver– wire stripper, and a can-opener–screwdriver. Besides Victorinox and Wenger, many other manufacturers now make similar knives. Other versions may include items like a nail file, tweezers, folding scissors, a tooth pick, a magnifying glass, screwdriver bits and others. There are also version ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

Multi-function Display
A multifunction display (MFD) is a small-screen (CRT or LCD) surrounded by multiple soft keys (configurable buttons) that can be used to display information to the user in numerous configurable ways. MFDs originated in aviation, first in military aircraft, and later were adopted by commercial aircraft, general aviation, automotive use, motorsports use, and shipboard use. MFDs in aviation Often, an MFD will be used in concert with a primary flight display (PFD), and forms a component of a glass cockpit. MFDs are part of the digital era of modern planes or helicopter. The first MFDs were introduced by air forces in the late 1960s and early 1970s; an early example is the F-111D (first ordered in 1967, delivered from 1970–73). The advantage of an MFD over analog display is that an MFD does not consume much space in the cockpit, as data can be presented in multiple pages, rather than always being present at once. For example, the cockpit of RAH-66 "Comanche" does not have ana ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

Multi-touch
In computing, multi-touch is technology that enables a surface (a touchpad or touchscreen) to recognize the presence of more than one somatosensory system, point of contact with the surface at the same time. The origins of multitouch began at CERN, MIT, University of Toronto, Carnegie Mellon University and Bell Labs in the 1970s. CERN started using multi-touch screens as early as 1976 for the controls of the Super Proton Synchrotron. Capacitive multi-touch displays were popularized by Apple Inc., Apple's iPhone in 2007. Multi-touch may be used to implement additional functionality, such as pinch to zoom or to activate certain subroutines attached to predefined gestures using gesture recognition. Several uses of the term multi-touch resulted from the quick developments in this field, and many companies using the term to market older technology which is called ''gesture-enhanced single-touch'' or several other terms by other companies and researchers. Several other similar or relat ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

Multi-Functional Transport Satellite
Multifunctional Transport Satellites (MTSAT) were a series of weather and aviation control satellites. They were replaced by Himawari 8 on 7 July 2015. They were geostationary satellites owned and operated by the Japanese Ministry of Land, Infrastructure, Transport and Tourism (MLIT) and the Japan Meteorological Agency (JMA), and provide coverage for the hemisphere centred on 140.0° East; this includes Japan and Australia who are the principal users of the satellite imagery that MTSAT provides. They replace the GMS-5 satellite, also known as ''Himawari 5'' ("himawari" or "ひまわり" meaning "sunflower"). They can provide imagery in five wavelength bands — visible and four infrared, including the water vapour channel. The visible light camera has a resolution of 1 km; the infrared cameras have 4 km (resolution is lower away from the equator at 140° East). The spacecraft have a planned lifespan of five years. MTSAT-1 and 1R were built by Space Systems/Loral. MT ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

Multifunctional Information Distribution System
Multifunctional Information Distribution System (MIDS) is the NATO name for the communication component of Link 16, Link-16 developed by Xetron. MIDS is an advanced command, control, communications, computing and intelligence (C4I) system incorporating high-capacity, jam-resistant, digital communication links for exchange of near real-time tactical information, including both data and voice, among air, ground, and sea elements. MIDS is intended to support key theater functions such as surveillance, identification, air control, weapons engagement coordination and direction for all services. The MIDS program includes two different families of receiver synthesizer line cards: * MIDS-LVT (Low volume terminal): LVT(1), LVT(2), or LVT(3). * MIDS-JTRS (Joint Tactical Radio System Terminals). MIDS-JTRS is a software-defined radio (SDR) that is compliant with the JTRS Software_Communications_Architecture , Software Communication Architecture (SCA) . MIDS JTRS maintains the Link-16, J-Voic ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


Multifunctional Support Ship
The Multifunctional Support Ship (MSS), also known as the MSS (formerly TRIFIC & MICAN) is a project of the Royal Netherlands Navy (RNLN, Dutch: Koninklijke Marine). it was announced on 23 November 2022 by Captain (E) Paul Flos, head of maritime systems at DMO. On 24 September 2024 an announcement was made by State Secretary for Defence Gijs Tuinman that two ships will be procured from the Damen Group. Both ships should be in service by 2027. History On 23 November 2022 it was revealed that the Dutch navy was investigating the possibility of purchasing four commercially available offshore supply type vessels and use these as missile carriers. This program, when first announced, was known as The Rapidly Increased Firepower Capability (TRIFIC) and involved ships that would operate with a very small crew. The ''TRIFIC''-vessels can carry up to six container units with eight or more vertical launch cells (depending on missile size) in each container. One or more of these s ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


Multifunction Polis
The Multifunction Polis (MFP) was a controversial scheme for a planned community in Australia proposed in 1987 and abandoned in 1998. From the Greek word ''polis'', meaning "city", it was imagined as a place where work and leisure, lifetime education and intercultural exchange, research and manufacturing would be uniquely integrated. The MFP was intended to have an initial population of 100,000, though some modelling was done on the assumption of a population up to 250,000. Futuristic infrastructure and modern communications were expected to help attract high-tech industries. Asian investors were targeted as an important source of funds, with an emphasis on Japanese investors.
[...More Info...]       [...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]