|
Circuit-switched
Circuit switching is a method of implementing a telecommunications network in which two network nodes establish a dedicated communications channel ( circuit) through the network before the nodes may communicate. The circuit guarantees the full bandwidth of the channel and remains connected for the duration of the communication session. The circuit functions as if the nodes were physically connected as with an electrical circuit. Circuit switching originated in analog telephone networks where the network created a dedicated circuit between two telephones for the duration of a telephone call. It contrasts with message switching and packet switching used in modern digital networks in which the trunklines between switching centres carry data between many different nodes in the form of data packets without dedicated circuits. Description The defining example of a circuit-switched network is the early analogue telephone network. When a call is made from one telephone to another, ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
ISDN
Integrated Services Digital Network (ISDN) is a set of communication standards for simultaneous digital transmission of voice, video, data, and other network services over the digitalised circuits of the public switched telephone network. Work on the standard began in 1980 at Bell Labs and was formally standardized in 1988 in the CCITT "Red Book". By the time the standard was released, newer networking systems with much greater speeds were available, and ISDN saw relatively little uptake in the wider market. One estimate suggests ISDN use peaked at a worldwide total of 25 million subscribers at a time when 1.3 billion analog lines were in use. ISDN has largely been replaced with digital subscriber line (DSL) systems of much higher performance. Prior to ISDN, the telephone system consisted of digital links like T1/ E1 on the long-distance lines between telephone company offices and analog signals on copper telephone wires to the customers, the " last mile". At the time, t ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Packet Switching
In telecommunications, packet switching is a method of grouping Data (computing), data into short messages in fixed format, i.e. ''network packet, packets,'' that are transmitted over a digital Telecommunications network, network. Packets consist of a header (computing), header and a payload (computing), payload. Data in the header is used by networking hardware to direct the packet to its destination, where the payload is extracted and used by an operating system, application software, or Protocol stack, higher layer protocols. Packet switching is the primary basis for data communications in computer networks worldwide. During the early 1960s, American engineer Paul Baran developed a concept he called ''distributed adaptive message block switching'', with the goal of providing a fault-tolerant, efficient routing method for telecommunication messages as part of a research program at the RAND Corporation, funded by the United States Department of Defense. His ideas contradicted t ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Public Switched Telephone Network
The public switched telephone network (PSTN) is the aggregate of the world's telephone networks that are operated by national, regional, or local telephony operators. It provides infrastructure and services for public telephony. The PSTN consists of telephone lines, fiber-optic cables, microwave transmission links, cellular networks, communications satellites, and undersea telephone cables interconnected by switching centers, such as central offices, network tandems, and international gateways, which allow telephone users to communicate with each other. Originally a network of fixed-line analog telephone systems, the PSTN is now predominantly digital in its core network and includes terrestrial cellular, satellite, and landline systems. These interconnected networks enable global communication, allowing calls to be made to and from nearly any telephone worldwide. Many of these networks are progressively transitioning to Internet Protocol to carry their telephony traffi ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Message Switching
In telecommunications, message switching involves messages routed in their entirety, one hop at a time. It evolved from circuit switching and was the precursor of packet switching. An example of message switching is email in which the message is sent through different intermediate servers to reach the mail server for storing. Unlike packet switching, the message is not divided into smaller units and sent independently over the network. History Western Union operated a message switching system, Plan 55-A, for processing telegrams in the 1950s. Leonard Kleinrock wrote a doctoral thesis at the Massachusetts Institute of Technology in 1962 that analyzed queueing delays in this system. Message switching was built by Collins Radio Company, Newport Beach, California, during the period 1959–1963 for sale to large airlines, banks and railroads. The original design for the ARPANET was Wesley Clark's April 1967 proposal for using Interface Message Processors to create a message ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Call Setup
In telecommunication, call setup is the process of establishing a virtual circuit across a telecommunications network. Call setup is typically accomplished using a signaling protocol. The term call set-up time has the following meanings: # The overall length of time required to establish a circuit-switched call between users. # For data communication, the overall length of time required to establish a circuit-switched call between terminals; ''i.e.,'' the time from the initiation of a call request to the beginning of the call message. ''Note:'' Call set-up time is the summation of: (a) call request time—the time from initiation of a calling signal to the delivery to the caller of a proceed-to-select signal; (b) selection time—the time from the delivery of the proceed-to-select signal until all the selection signals have been transmitted; and (c) post selection time—the time from the end of the transmission of the selection signals until the delivery of the call-connec ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Electrical Circuit
An electrical network is an interconnection of electrical components (e.g., battery (electricity), batteries, resistors, inductors, capacitors, switches, transistors) or a model of such an interconnection, consisting of electrical elements (e.g., voltage sources, current sources, Electrical resistance and conductance, resistances, inductances, capacitances). An electrical circuit is a network consisting of a closed loop, giving a return path for the current. Thus all circuits are networks, but not all networks are circuits (although networks without a closed loop are often referred to as "open circuits"). A resistive network is a network containing only resistors and ideal current and voltage sources. Network analysis (electrical circuits), Analysis of resistive networks is less complicated than analysis of networks containing capacitors and inductors. If the sources are constant (Direct current, DC) sources, the result is a DC network. The effective resistance and current dist ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Plain Old Telephone Service
Plain old telephone service (POTS), or publicly offered telephone service, is basic Voice band, voice-grade telephone service. Historically, POTS has been delivered by Analog signal, analog signal transmission over copper loops, but the term also describes Backward compatibility, backward-compatible analog connections offered by digital telephone systems. Copper loop POTS was the standard service offering from telephone companies in the United States from 1876 until 1988, when the Integrated Services Digital Network (ISDN) Basic Rate Interface (BRI) was introduced, followed by the development of mobile phone, cellular telephone systems and voice over internet protocol (VoIP). Despite the advent of these technologies, copper loop POTS remains a basic form of residential and small business connection to the telephone network in many parts of the world. The term encapsulates a technology that has been available since the introduction of the public telephone system in the late 19th c ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Multiplexing
In telecommunications and computer networking, multiplexing (sometimes contracted to muxing) is a method by which multiple analog or digital signals are combined into one signal over a shared medium. The aim is to share a scarce resource—a physical transmission medium. For example, in telecommunications, several telephone calls may be carried using one wire. Multiplexing originated in telegraphy in the 1870s, and is now widely applied in communications. In telephony, George Owen Squier is credited with the development of telephone carrier multiplexing in 1910. The multiplexed signal is transmitted over a communication channel such as a cable. The multiplexing divides the capacity of the communication channel into several logical channels, one for each message signal or data stream to be transferred. A reverse process, known as demultiplexing, extracts the original channels on the receiver end. A device that performs the multiplexing is called a multiplexer (MUX), and a ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Datagram
A datagram is a basic transfer unit associated with a packet-switched network. Datagrams are typically structured in header and payload sections. Datagrams provide a connectionless communication service across a packet-switched network. The delivery, arrival time, and order of arrival of datagrams need not be guaranteed by the network. History In the early 1970s, the term ''datagram'' was created by combining the words ''data'' and ''telegram'' by the CCITT rapporteur on packet switching, Halvor Bothner-By. While the word was new, the concept had already a long history. In 1964, Paul Baran described, in a RAND Corporation report, a hypothetical military network having to resist a nuclear attack. Small standardized ''message blocks'', bearing source and destination addresses, were stored and forwarded in computer nodes of a highly redundant meshed computer network. Baran wrote: "The network user who has called up a ''virtual connection'' to an end station and has trans ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Virtual Circuit
A virtual circuit (VC) is a means of transporting data over a data network, based on packet switching and in which a connection is first established across the network between two endpoints. The network, rather than having a fixed data rate reservation per connection as in circuit switching, takes advantage of the statistical multiplexing on its transmission links, an intrinsic feature of packet switching. A 1978 standardization of virtual circuits by the CCITT imposes per-connection Flow control (data), flow controls at all user-to-network and network-to-network interfaces. This permits participation in congestion control and reduces the likelihood of packet loss in a heavily loaded network. Some circuit protocols provide Reliability (computer networking), reliable communication service through the use of data retransmissions invoked by error detection and automatic repeat request (ARQ). Before a virtual circuit may be used, it must be established between network nodes in the ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Connectionless Communication
Connectionless communication, often referred to as CL-mode communication,Information Processing Systems - Open Systems Interconnection, "Transport Service Definition - Addendum 1: Connectionless-mode Transmission", International Organization for Standardization, International Standard 8072/AD 6, December 1986. is a data transmission method used in packet switching networks, using data packets that are frequently called datagrams, in which each data packet is individually addressed and routed based on information carried in each packet, rather than in the setup information of a prearranged, fixed data channel as in connection-oriented communication. Connectionless protocols are usually described as stateless protocols, the Internet Protocol (IP) and User Datagram Protocol (UDP) are examples. Attributes Under connectionless communication between two network endpoints, a message can be sent from one endpoint to another without prior arrangement. The device at one end of the communi ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Connection-oriented Communication
In telecommunications and computer networking, connection-oriented communication is a communication protocol where a communication session or a semi-permanent connection is established before any useful data can be transferred. The established connection ensures that data is delivered in the correct order to the upper communication layer. The alternative is called '' connectionless communication'', such as the datagram mode communication used by Internet Protocol (IP) and User Datagram Protocol (UDP), where data may be delivered out of order, since different network packets are routed independently and may be delivered over different paths. Connection-oriented communication may be implemented with a circuit switched connection, or a packet-mode virtual circuit connection. In the latter case, it may use either a transport layer virtual circuit protocol such as the Transmission Control Protocol (TCP) protocol, allowing data to be delivered in order. Although the lower-layer switc ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
