|
Wander Johannes De
In electronics and telecommunications, jitter is the deviation from true periodicity of a presumably periodic signal, often in relation to a reference clock signal. In clock recovery applications it is called timing jitter. Jitter is a significant, and usually undesired, factor in the design of almost all communications links. Jitter can be quantified in the same terms as all time-varying signals, e.g., root mean square (RMS), or peak-to-peak displacement. Also, like other time-varying signals, jitter can be expressed in terms of spectral density. Jitter period is the interval between two times of maximum effect (or minimum effect) of a signal characteristic that varies regularly with time. Jitter frequency, the more commonly quoted figure, is its inverse. ITU-T G.810 classifies deviation lower frequencies below 10 Hz as ''wander'' and higher frequencies at or above 10 Hz as ''jitter''. Jitter may be caused by electromagnetic interference and crosstalk with carrier ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Electronics
Electronics is a scientific and engineering discipline that studies and applies the principles of physics to design, create, and operate devices that manipulate electrons and other Electric charge, electrically charged particles. It is a subfield of physics and electrical engineering which uses Passivity (engineering), active devices such as transistors, diodes, and integrated circuits to control and amplify the flow of electric current and to convert it from one form to another, such as from alternating current (AC) to direct current (DC) or from analog signal, analog signals to digital signal, digital signals. Electronic devices have significantly influenced the development of many aspects of modern society, such as telecommunications, entertainment, education, health care, industry, and security. The main driving force behind the advancement of electronics is the semiconductor industry, which continually produces ever-more sophisticated electronic devices and circuits in respo ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
OC-192
Optical Carrier transmission rates are a standardized set of specifications of transmission bandwidth for digital signals that can be carried on Synchronous Optical Networking (SONET) fiber optic networks. Transmission rates are defined by rate of the bitstream of the digital signal and are designated by hyphenation of the acronym OC and an integer value of the multiple of the basic unit of rate, e.g., OC-48. The base unit is 51.84 Mbit/s. Thus, the speed of optical-carrier-classified lines labeled as OC-n is ''n'' × 51.84 Mbit/s. Optical Carrier specifications Optical Carrier classifications are based on the abbreviation ''OC'' followed by a number specifying a multiple of 51.84 Mbit/s: ''n'' × 51.84 Mbit/s => OC-''n''. For example, an OC-3 transmission medium has 3 times the transmission capacity of OC-1. OC-1 OC-1 is a SONET line with transmission speeds of up to 51.84 Mbit/s ( payload: 50.112 Mbit/s; overhead: 1.728 Mbit/s) using optica ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Data-dependent Jitter
Data-dependent jitter (DDJ) is a specific class of timing jitter. In particular, it is a form of deterministic jitter which is correlated with the sequence of bits in the data stream. It is also a form of Intersymbol interference, ISI. Properties Depending on characteristics of the Analog signal, signal and Transmission line, transmission topology, previously transmitted symbols can affect the edge cross over time. This creates a probability distribution for the timing of the signal edge, which is usually recorded in a Probability density function, PDF. DDJ's Probability density function, PDF is always a series of Pulse (signal processing), pulses at the locations where a specific bit pattern experiences a Crossover distortion, cross over. Therefore, in order to get an accurate measure of the DDJ in a particular system, a large number of bit patterns must be analyzed (often just a PRBS) unless an analytical solution can be found. References Data transmission Packets (infor ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Electrical Circuit
An electrical network is an interconnection of electrical components (e.g., battery (electricity), batteries, resistors, inductors, capacitors, switches, transistors) or a model of such an interconnection, consisting of electrical elements (e.g., voltage sources, current sources, Electrical resistance and conductance, resistances, inductances, capacitances). An electrical circuit is a network consisting of a closed loop, giving a return path for the current. Thus all circuits are networks, but not all networks are circuits (although networks without a closed loop are often referred to as "open circuits"). A resistive network is a network containing only resistors and ideal current and voltage sources. Network analysis (electrical circuits), Analysis of resistive networks is less complicated than analysis of networks containing capacitors and inductors. If the sources are constant (Direct current, DC) sources, the result is a DC network. The effective resistance and current dist ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
