|
Tire Maintenance
Inspection and maintenance of tires is about inspecting for wear and damage on tires so that adjustments or measures can be made to take better care of the tires so that they last longer, or to detect or predict if repairs or replacement of the tires becomes necessary. Tire maintenance for motor vehicles is based on several factors. The chief reason for tire replacement is friction from moving contact with road surfaces, causing the tread on the outer perimeter of tires to eventually wear away. When the tread depth becomes too shallow, like for example below 3.2 mm (4/32 in), the tire is worn out and should be replaced. The same Rim (wheel), rims can usually be used throughout the lifetime of the car. Other problems encountered in tire maintenance include: *Uneven or accelerated tire wear: can be caused by under-inflation, overloading or poor wheel alignment. *Increased tread wear on only one side of a tire: often a sign of poor wheel alignment. *Tread worn away completely: es ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Friction
Friction is the force resisting the relative motion of solid surfaces, fluid layers, and material elements sliding (motion), sliding against each other. There are several types of friction: *Dry friction is a force that opposes the relative lateral motion of two solid surfaces in contact. Dry friction is subdivided into ''static friction'' ("stiction") between non-moving surfaces, and ''kinetic friction'' between moving surfaces. With the exception of atomic or molecular friction, dry friction generally arises from the interaction of surface features, known as Asperity (materials science), asperities (see Figure 1). *Fluid friction describes the friction between layers of a viscous fluid that are moving relative to each other. *Lubricated friction is a case of fluid friction where a lubricant fluid separates two solid surfaces. *Skin friction is a component of Drag (physics), drag, the force resisting the motion of a fluid across the surface of a body. *Internal friction is t ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Tire Change
A tire (American English) or tyre (British English) is a ring-shaped component that surrounds a wheel's rim to transfer a vehicle's load from the axle through the wheel to the ground and to provide traction on the surface over which the wheel travels. Most tires, such as those for automobiles and bicycles, are pneumatically inflated structures, which also provide a flexible cushion that absorbs shock as the tire rolls over rough features on the surface. Tires provide a footprint, called a contact patch, that is designed to match the weight of the vehicle with the bearing strength of the surface that it rolls over by providing a bearing pressure that will not deform the surface excessively. The materials of modern pneumatic tires are synthetic rubber, natural rubber, fabric, and wire, along with carbon black and other chemical compounds. They consist of a tread and a body. The tread provides traction while the body provides containment for a quantity of compressed a ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Tire-pressure Monitoring System
A tire-pressure monitoring system (TPMS) monitors the air pressure inside the pneumatic tires on vehicles. A TPMS reports real-time tire-pressure information to the driver, using either a gauge, a pictogram display, or a simple low-pressure warning light. TPMS can be divided into two different types – direct (dTPMS) and indirect (iTPMS). TPMS are installed either when the vehicle is made or after the vehicle is put to use. The goal of a TPMS is avoiding traffic accidents, poor fuel economy, and increased tire wear due to under-inflated tires through early recognition of a hazardous state of the tires. This functionality first appeared in luxury vehicles in Europe in the 1980s, while mass-market adoption followed the USA passing the 2000 TREAD Act after the Firestone and Ford tire controversy. Mandates for TPMS technology in new cars have continued to proliferate in the 21st century in Russia, the EU, Japan, South Korea and many other Asian countries. From November 2 ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Tire-pressure Gauge
A tire-pressure gauge, or tyre-pressure gauge, is a pressure gauge used to measure the pressure of tires on a vehicle. Since tires are rated for specific loads at certain pressure, it is important to keep the pressure of the tire at the optimal amount. Tires are rated for their optimal pressure when cold, meaning before the tire has been driven on for the day and allowed to heat up, which ultimately changes the internal pressure of the tire due to the expansion of gases. The precision of a typical mechanical gauge as shown is ±. Higher precision gauges with ± uncertainty can also be obtained. Tire-pressure monitoring systems Many modern cars now come with built-in tire pressure sensors that allow all four tire pressures to be read simultaneously from inside the car. Before 2005, most on-board tire-pressure monitoring system A tire-pressure monitoring system (TPMS) monitors the air pressure inside the pneumatic tires on vehicles. A TPMS reports real-time tire-pre ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Direct TPMS
Direct TPMS, or direct tire pressure monitoring systems (direct sensor TPMS) refers to the use of a pressure sensor directly mounted on the wheels or tires of a vehicle.Hawes, p. 1. The pressure inside the tire is measured using a pressure transducer with the pressure information being subsequently sent to the vehicle to warn the driver of under or over inflation of a tire. The pressure information is commonly transmitted to the vehicle using radio frequency (RF) technology, though systems using mechanical, electrical or magnetic methods have been used over recent years. Typical system In most current designs of direct TPMS, a small electronic assembly which is rugged enough to be mounted inside a tire, measures the pressure using a microelectromechanical system (MEMS) pressure sensor and then transmits this and other information to one or more vehicle receivers. Other information can include a serial number, temperature, acceleration, direction of rotation and the status of t ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Tire-pressure Gauge
A tire-pressure gauge, or tyre-pressure gauge, is a pressure gauge used to measure the pressure of tires on a vehicle. Since tires are rated for specific loads at certain pressure, it is important to keep the pressure of the tire at the optimal amount. Tires are rated for their optimal pressure when cold, meaning before the tire has been driven on for the day and allowed to heat up, which ultimately changes the internal pressure of the tire due to the expansion of gases. The precision of a typical mechanical gauge as shown is ±. Higher precision gauges with ± uncertainty can also be obtained. Tire-pressure monitoring systems Many modern cars now come with built-in tire pressure sensors that allow all four tire pressures to be read simultaneously from inside the car. Before 2005, most on-board tire-pressure monitoring system A tire-pressure monitoring system (TPMS) monitors the air pressure inside the pneumatic tires on vehicles. A TPMS reports real-time tire-pre ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Tire Rotation
Tire rotation is the practice of moving the wheels and tires of an automobile from one position to another, to ensure even tire wear. Even tire wear extends the useful life of a set of tires, but the value of this is disputed. Causes of uneven tire wear The differing weight placed on the tires by the front and rear axles causes uneven wear. With the majority of cars having the engine in front, the front tires typically bear more weight than the rear tires. Front-wheel drive vehicles have not only the engine but also the transaxle in front, adding to the weight difference. Moreover, additional stress is placed disproportionately on the front tires by braking and steering. Thus, tire rotation needs to occur more frequently for front-wheel drive vehicles. Turning the vehicle will cause uneven tire wear. The outside, front tire is worn disproportionately. In countries with right-hand traffic, for example, right turns are tighter than left turns and most cloverleaf interchanges an ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
NASCAR
The National Association for Stock Car Auto Racing, LLC (NASCAR) is an American auto racing sanctioning and operating company that is best known for stock car racing. The privately owned company was founded by Bill France Sr. in 1948, and his son, Jim France, has been the CEO since August 2018. The company is headquartered in Daytona Beach, Florida. Each year, NASCAR sanctions over 1,500 races at over 100 tracks in 48 US states as well as in Canada, Mexico, Brazil and Europe. History Early stock car racing In the 1920s and 1930s, Daytona Beach supplanted France and Belgium as the preferred location for world land speed records. After a historic race between Ransom Olds and Alexander Winton in 1903, 15 records were set on what became the Daytona Beach Road Course between 1905 and 1935. Daytona Beach had become synonymous with fast cars in 1936. Drivers raced on a course, consisting of a stretch of beach as one straightaway, and a narrow blacktop beachfront highway, ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Slicks
A racing slick or slick tyre is a type of tyre that has a smooth tread used mostly in auto racing. The first production slick tyre was developed by M&H Tires in the early 1950s for use in drag racing. By eliminating any grooves cut into the tread, such tyres provide the largest possible contact patch to the road, and maximize dry traction for any given tyre dimension; see Performance. Slick tyres are used on race tracks and in road racing, where acceleration, steering and braking require maximum traction from each wheel. Slick tyres are typically used on only the driven (powered) wheels in drag racing, where the only concern is maximum traction to put power to the ground, and are not used in rallying. Slick tyres are not suitable for use on common road vehicles, which must be able to operate in all weather conditions. They are used in auto racing where competitors can choose different tyres based on the weather conditions and can often change tyres during a race. Performance T ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Hydroplaning (tires)
Aquaplaning or hydroplaning by the tires of a road vehicle, aircraft or other wheeled vehicle occurs when a layer of water builds between the wheels of the vehicle and the road surface, leading to a loss of traction that prevents the vehicle from responding to control inputs. If it occurs to all wheels simultaneously, the vehicle becomes, in effect, an uncontrolled sled. Aquaplaning is a different phenomenon from when water on the surface of the roadway merely acts as a lubricant. Traction is diminished on wet pavement even when aquaplaning is not occurring. Causes Every vehicle function that changes direction or speed relies on friction between the tires and the road surface. The grooves of a rubber tire are designed to disperse water from beneath the tire, providing high friction even in wet conditions. Aquaplaning occurs when a tire encounters more water than it can dissipate. Water pressure in front of the wheel forces a wedge of water under the leading edge of the tire, cau ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Run Flat Tire
A run-flat tire/tyre is a pneumatic vehicle tire that is designed to resist the effects of deflation when punctured, and to allow the vehicle to continue to be driven at reduced speeds - under – and for limited distances – usually , depending on the type of tire. Technologies There are three basic technologies currently available, described below. Self-supporting The origins of the commercial ''self-supporting'' run-flat tire started in 1935 with a tire that had a fabric inner tire. The tire was advertised as a protection against blowouts, a common and dangerous occurrence in the 1930s. In 1934, Michelin introduced a tire that was based on technology developed for local commuter trains and trolleys. It had a safety rim inside the tire which if punctured would run on a special foam lining. The tire was sold for military use and for specialized vehicles like bank armoured cars. It was advertised as "semi-bulletproof". While the tire performed as advertised it was far too ex ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Rim (wheel)
The rim is the "outer edge of a wheel, holding the tire". It makes up the outer circular design of the wheel on which the inside edge of the tire is mounted on vehicles such as car, automobiles. For example, on a bicycle wheel the rim is a large hoop attached to the outer ends of the spokes of the wheel that holds the tire and tube. In cross-section, the rim is deep in the center and shallow at the outer edges, thus forming a "U" shape that supports the bead of the tire casing. In the 1st millennium BC, an iron rim was introduced around the wooden wheels of chariots to improve longevity on rough surfaces. Characteristics ;Design: The first pneumatic tires for bicycles were simple tubes in shape secured to the wooden outer concave surfaced circumference of the wheel by glue and air pressure pressing them against it. The surface for receiving the tube was not very secure thus causing the tires to sometimes come off the rims. Bicycle manufacturer and inventor Thomas B. Jeffery ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
