|
Pocketdelta Robot
The PocketDelta Robot is a microrobot based on a parallel structure called "Delta robot". It has been designed to perform micro-assembly tasks where high-speed and high-precision are needed in a reduced working space. The robot's size is 120×120×200 mm offering a workspace diameter up to 150mm × 30mm.PocketDelta Robot - Asyril SA, http://www.asyril.ch/en/products/delta-robots.html. Design Prerequisites to high-speed and high-precision are a light, but stiff mechanical structure. Thus stiff and lightweight materials build up the moving part of the robot, whereas the heavy motors are attached to the supporting frame. The motors are attached directly to the robot arm (direct drive), eliminating backlash, friction and elasticity. A high-level of integration reduces the size of the whole system. The mechanics, motion drives, control electronics and computing are all integrated into one compact unit. This innovative configuration simplifies its use and increases the flexibility ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Transmission Control Protocol
The Transmission Control Protocol (TCP) is one of the main protocols of the Internet protocol suite. It originated in the initial network implementation in which it complemented the Internet Protocol (IP). Therefore, the entire suite is commonly referred to as TCP/IP. TCP provides reliable, ordered, and error-checked delivery of a stream of octets (bytes) between applications running on hosts communicating via an IP network. Major internet applications such as the World Wide Web, email, remote administration, and file transfer rely on TCP, which is part of the Transport Layer of the TCP/IP suite. SSL/TLS often runs on top of TCP. TCP is connection-oriented, and a connection between client and server is established before data can be sent. The server must be listening (passive open) for connection requests from clients before a connection is established. Three-way handshake (active open), retransmission, and error detection adds to reliability but lengthens latency. ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Robots Of Switzerland
"\n\n\n\n\nThe robots exclusion standard, also known as the robots exclusion protocol or simply robots.txt, is a standard used by websites to indicate to visiting web crawlers and other web robots which portions of the site they are allowed to visit.\n\nThis relies on voluntary compliance. Not all robots comply with the standard; email harvesters, spambots, malware and robots that scan for security vulnerabilities may even start with the portions of the website where they have been told to stay out.\n\nThe \"robots.txt\" file can be used in conjunction with sitemaps, another robot inclusion standard for websites.\n History\nThe standard was proposed by Martijn Koster, when working for Nexor in February 1994\n on the ''www-talk'' mailing list, the main communication channel for WWW-related activities at the time. Charles Stross claims to have provoked Koster to suggest robots.txt, after he wrote a badly-behaved web crawler that inadvertently caused a denial-of-service attack on Koste ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Micro Robots
Micro may refer to: Measurement * micro- (μ), a metric prefix denoting a factor of 10−6 Places * Micro, North Carolina, town in U.S. People * DJ Micro, (born Michael Marsicano) an American trance DJ and producer *Chii Tomiya (都宮 ちい, born 1991), Japanese female professional wrestler, ring name Micro Arts, entertainment, and media * Micro (comics), often known as Micro, a character in Marvel Comics * ''Micro'' (novel), techno-thriller by Michael Crichton, published posthumously in 2011 * Micro (Thai band), a Thai rock band formed in 1983 * ''IEEE Micro'', a peer-reviewed scientific journal Brands and enterprises * Micro Cars, Sri Lankan automobile company, established 1995 * Micro Center, an American computer department store, established 1979 * Micro ISV (mISV or μISV), a term for a small independent software vendor * Micro Mobility Systems, Swiss company producing kickscooters Computing * ''Micro'', a mostly-obsolete term for a microcomputer, e.g.: **BBC Micr ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Biochip
In molecular biology, biochips are engineered substrates ("miniaturized laboratories") that can host large numbers of simultaneous biochemical reactions. One of the goals of biochip technology is to efficiently screen large numbers of biological analytes, with potential applications ranging from disease diagnosis to detection of bioterrorism agents. For example, digital microfluidic biochips are under investigation for applications in biomedical fields. In a digital microfluidic biochip, a group of (adjacent) cells in the microfluidic array can be configured to work as storage, functional operations, as well as for transporting fluid droplets dynamically. History The development started with early work on the underlying sensor technology. One of the first portable, chemistry-based sensors was the glass pH electrode, invented in 1922 by Hughes. The basic concept of using exchange sites to create permselective membranes was used to develop other ion sensors in subsequent years. F ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
System In Package
A system in a package (SiP) or system-in-package is a number of integrated circuits enclosed in one or more chip carrier packages that may be stacked using package on package. The SiP performs all or most of the functions of an electronic system, and is typically used inside a mobile phone, digital music player, etc. Dies containing integrated circuits may be stacked vertically on a substrate. They are internally connected by fine wires that are bonded to the package. Alternatively, with a flip chip technology, solder bumps are used to join stacked chips together. A SiP is like a system on a chip (SoC) but less tightly integrated and not on a single semiconductor die. SiP dies can be stacked vertically or tiled horizontally, unlike less dense multi-chip modules, which place dies horizontally on a carrier. SiP connects the dies with standard off-chip wire bonds or solder bumps, unlike slightly denser three-dimensional integrated circuits which connect stacked silicon dies w ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Microoptoelectromechanical Systems
Microoptoelectromechanical systems (MOEMS), also known as optical MEMS, are integrations of mechanical, optical, and electrical systems that involve sensing or manipulating optical signals at a very small size. MOEMS includes a wide variety of devices, for example optical switch, optical cross-connect, tunable VCSEL, microbolometers. These devices are usually fabricated using micro-optics and standard micromachining technologies using materials like silicon, silicon dioxide, silicon nitride and gallium arsenide. Merging technologies MOEMS includes two major technologies, microelectromechanical systems and micro-optics. Both these two technologies independently involve in batch processing similar to integrated circuits, and micromachining similar to fabrication of microsensor. Parallel with MEMS developments and even earlier, sensor technology advanced to microsensors and joining with microactuators. Development of microsensors and microactuators were also due to a mother ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Microelectromechanical Systems
Microelectromechanical systems (MEMS), also written as micro-electro-mechanical systems (or microelectronic and microelectromechanical systems) and the related micromechatronics and microsystems constitute the technology of microscopic devices, particularly those with moving parts. They merge at the nanoscale into nanoelectromechanical systems (NEMS) and nanotechnology. MEMS are also referred to as micromachines in Japan and microsystem technology (MST) in Europe. MEMS are made up of components between 1 and 100 micrometers in size (i.e., 0.001 to 0.1 mm), and MEMS devices generally range in size from 20 micrometres to a millimetre (i.e., 0.02 to 1.0 mm), although components arranged in arrays (e.g., digital micromirror devices) can be more than 1000 mm2. They usually consist of a central unit that processes data (an integrated circuit chip such as microprocessor) and several components that interact with the surroundings (such as microsensors). Because of th ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Surface Mount Technology
Surface-mount technology (SMT), originally called planar mounting, is a method in which the electrical components are mounted directly onto the surface of a printed circuit board (PCB). An electrical component mounted in this manner is referred to as a surface-mount device (SMD). In industry, this approach has largely replaced the through-hole technology construction method of fitting components, in large part because SMT allows for increased manufacturing automation which reduces cost and improves quality. It also allows for more components to fit on a given area of substrate. Both technologies can be used on the same board, with the through-hole technology often used for components not suitable for surface mounting such as large transformers and heat-sinked power semiconductors. An SMT component is usually smaller than its through-hole counterpart because it has either smaller leads or no leads at all. It may have short pins or leads of various styles, flat contacts, a matrix ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Microfactory
A microfactory either refers to a capital-light facility used for the local assembly of a complex product or system or a small (normally automated) factory for producing small quantities of products. The term was proposed by the Mechanical Engineer Laboratory (MEL) of Japan in 1990 and has recently been used to describe the approach of manufacturers like Arrival. The microfactory's main advantages are saving a substantial amount of space, energy, materials, time, and upfront capital costs. Due to their reduced dimensions, microfactories are normally highly automated. They might contain automatic machine tools, assembly systems, quality inspection systems, material feed systems, waste elimination systems, a system to evaluate tool deterioration and a system to replace tools. At least one proposed microfactory is being designed to make many of its own parts, i.e., a partially self-replicating machine. A microfactory can also refer to a factory designed for flexible small batch pr ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
User Datagram Protocol
In computer networking, the User Datagram Protocol (UDP) is one of the core communication protocols of the Internet protocol suite used to send messages (transported as datagrams in packets) to other hosts on an Internet Protocol (IP) network. Within an IP network, UDP does not require prior communication to set up communication channels or data paths. UDP uses a simple connectionless communication model with a minimum of protocol mechanisms. UDP provides checksums for data integrity, and port numbers for addressing different functions at the source and destination of the datagram. It has no handshaking dialogues, and thus exposes the user's program to any unreliability of the underlying network; there is no guarantee of delivery, ordering, or duplicate protection. If error-correction facilities are needed at the network interface level, an application may instead use Transmission Control Protocol (TCP) or Stream Control Transmission Protocol (SCTP) which are designed fo ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
