|
2 Mm Scale
2 mm scale, often 2 mm finescale is a specification used for railway modelling, largely for modelling British railway prototypes. It uses a scale of 2 mm on the model to 1 foot on the prototype, which scales out to 1:152. The track gauge used to represent prototype standard gauge (4 feet inches) is . Track and wheels are closer to dead scale replicas than commercial British N. Standard The 2 mm standards were proposed by Mr. H H Groves in the early 1960s and revised to their current specification in November 1963 by Geoffrey Jones. It is similar in size to the slightly larger British N scale at 1:148, and the slightly smaller European/American N scale at 1:160; though it predates both. Since 2 mm scale is very close to the 1:148 British N scale, a hybrid specification can be modelled by re-wheeling proprietary British N-scale models to the 9.42 mm track gauge. This hybrid specification results in a track gauge equivalent to , slightly narrower ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Steam Locomotive
A steam locomotive is a locomotive that provides the force to move itself and other vehicles by means of the expansion of steam. It is fuelled by burning combustible material (usually coal, Fuel oil, oil or, rarely, Wood fuel, wood) to heat water in the locomotive's Boiler (power generation), boiler to the point where it becomes gaseous and its volume increases 1,700 times. Functionally, it is a steam engine on wheels. In most locomotives, the steam is admitted alternately to each end of its Steam locomotive components, cylinders in which pistons are mechanically connected to the locomotive's main wheels. Fuel and water supplies are usually carried with the locomotive, either on the locomotive itself or in a Tender (rail), tender coupled to it. #Variations, Variations in this general design include electrically powered boilers, turbines in place of pistons, and using steam generated externally. Steam locomotives were first developed in the United Kingdom of Great Britain an ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Standard Gauge
A standard-gauge railway is a railway with a track gauge of . The standard gauge is also called Stephenson gauge (after George Stephenson), international gauge, UIC gauge, uniform gauge, normal gauge in Europe, and SGR in East Africa. It is the most widely used track gauge around the world, with about 55% of the lines in the world using it. All high-speed rail lines use standard gauge except High-speed rail in Russia, those in Russia, High-speed rail in Finland, Finland, High-speed rail in Uzbekistan, Uzbekistan, and some line sections in High-speed rail in Spain, Spain. The distance between the inside edges of the heads of the rails is defined to be 1,435 mm except in the United States, Canada, and on some heritage British lines, where it is defined in Imperial and US customary measurement systems, U.S. customary/Imperial units, British Imperial units as exactly "four feet eight and one half inches", which is equivalent to 1,435.1mm. History As railways developed and expa ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Finescale
Finescale standards or Fine Standards are model railway standards that aim to be close to the prototype dimensions. Reduction in toylike, overscale flanges, pointwork, etc. In Britain it is particularly used because small British prototypes meant that track gauge is underscale. Modelling to finescale standards requires skill, so modellers usually start with the coarse standards applied to ready-to-run models suitable as toys. Standards are set by modellers' societies. Finescale model railway standards * ScaleSeven (7 mm scale, O gauge) * EM gauge (4 mm scale, 18.2 mm gauge) * P4 (4 mm scale, 18.83 mm gauge) * Proto:48 (1/4 inch scale) * Proto:87 (H0 scale HO or H0 is a rail transport modelling scale using a 1:87 scale (3.5 mm to 1 foot). It is the most popular scale of model railway in the world. The rails are spaced apart for modelling standard gauge tracks and trains in HO. The ...) * 3 mm finescale * 2 mm finescale * O14 (7 mm scale, 14 mm gauge - ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Model Railway
Railway modelling (UK, Australia, New Zealand, and Ireland) or model railroading (US and Canada) is a hobby in which rail transport systems are Model building, modelled at a reduced Scale (ratio), scale. The scale models include locomotives, rolling stock, streetcars, rail tracks, tracks, Railway signal, signalling, Crane (machine), cranes, and landscapes including: countryside, roads, bridges, buildings, vehicles, harbors, urban landscape, model figures, lights, and features such as rivers, hills, tunnels, and canyons. The earliest model railways were the 'carpet railways' in the 1840s. The first documented model railway was the Railway of the Prince Imperial (French: Chemin de fer du Prince Impérial) built in 1859 by Emperor Napoleon III for his then 3-year-old son, also Louis-Napoléon, Prince Imperial, Napoleon, in the grounds of the Château de Saint-Cloud in Paris. It was powered by clockwork and ran in a figure-of-eight. Electric trains appeared around the start of t ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Modelling British Railway Prototypes
Modelling British railway prototypes is a hobby where railway modelling is applied to British prototypes. For historical reasons, British model scales have developed somewhat separately from those in other countries, and the commercial standards; 00 gauge and British N gauge are unique to British prototypes. The railways in Britain were for the most part standard gauge, and consequently most support focuses on these scales. Narrow gauge, and broad gauge standards also exist. British modellers tend to focus on British subjects, and most of the commercial support is British-based, but modellers of British prototypes exist across national boundaries. Standard gauge prototypes Commercially available standards There are two major commercial standards; 00 gauge (4 mm:foot, 16.5 mm gauge), and British N gauge (2.05 mm:foot, 9 mm gauge). Ready-to-run (RTR) equipment is available in both standards. Hornby Railways and Bachmann Branchline offer major RTR support in 00 gauge; G ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Rail Gauge
In rail transport, track gauge is the distance between the two rails of a railway track. All vehicles on a rail network must have wheelsets that are compatible with the track gauge. Since many different track gauges exist worldwide, gauge differences often present a barrier to wider operation on railway networks. The term derives from the metal bar, or gauge, that is used to ensure the distance between the rails is correct. Railways also deploy two other gauges to ensure compliance with a required standard. A ''loading gauge'' is a two-dimensional profile that encompasses a cross-section of the track, a rail vehicle and a maximum-sized load: all rail vehicles and their loads must be contained in the corresponding envelope. A '' structure gauge'' specifies the outline into which structures (bridges, platforms, lineside equipment etc.) must not encroach. Uses of the term The most common use of the term "track gauge" refers to the transverse distance between the inside surfaces ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Standard Gauge
A standard-gauge railway is a railway with a track gauge of . The standard gauge is also called Stephenson gauge (after George Stephenson), international gauge, UIC gauge, uniform gauge, normal gauge in Europe, and SGR in East Africa. It is the most widely used track gauge around the world, with about 55% of the lines in the world using it. All high-speed rail lines use standard gauge except High-speed rail in Russia, those in Russia, High-speed rail in Finland, Finland, High-speed rail in Uzbekistan, Uzbekistan, and some line sections in High-speed rail in Spain, Spain. The distance between the inside edges of the heads of the rails is defined to be 1,435 mm except in the United States, Canada, and on some heritage British lines, where it is defined in Imperial and US customary measurement systems, U.S. customary/Imperial units, British Imperial units as exactly "four feet eight and one half inches", which is equivalent to 1,435.1mm. History As railways developed and expa ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
N Scale
N scale is a popular model railway scale. Depending upon the manufacturer (or country), the scale ranges from 1:148 to 1:160. Effectively the scale is 1:159, 9 mm to , which is the width of standard gauge railway. However the scale may vary to simulate wide or narrow-gauge rail. In all cases, the ''gauge'' (the distance between the rails) is . The term N ''gauge'' refers to the track dimensions, but in the United Kingdom in particular British N gauge refers to a 1:148 scale with 1:160 () track gauge modelling. The terms N scale and N gauge are often inaccurately used interchangeably, as scale is defined as ratio or proportion of the model, and gauge only as a distance between rails. The scale 1:148 defines the rail-to-rail gauge equal to 9 mm exactly (at the cost of scale exactness), so when calculating the rail or track use 1:160 and for engines and car wheel base use 1:148. All rails are spaced 9 mm apart but the height can differ. Rail height (in thousandt ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Protofour
Protofour or P4 is a set of standards for model railways allowing construction of models to a scale of 4 mm to (1:76.2), the predominant scale of model railways of the British prototype. For historical reasons almost all manufacturers of British prototype models use OO gauge (1:76.2 models running on gauge track). There are several finescale standards which have been developed to enable more accurate models than OO, and P4 is the most accurate in common use. The P4 standards specify a scale model track gauge of for standard gauge A standard-gauge railway is a railway with a track gauge of . The standard gauge is also called Stephenson gauge (after George Stephenson), international gauge, UIC gauge, uniform gauge, normal gauge in Europe, and SGR in East Africa. It is the ... railways. Joe Brook Smith was the first to propose use of an exact scale track gauge in July 1964, when also the term ''Protofour'' was invented by Malcolm Cross. The standards were later published ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Brunel Gauge
Isambard Kingdom Brunel ( ; 9 April 1806 – 15 September 1859) was an English civil engineer and mechanical engineer who is considered "one of the most ingenious and prolific figures in engineering history", "one of the 19th-century engineering giants", and "one of the greatest figures of the Industrial Revolution, hochanged the face of the English landscape with his groundbreaking designs and ingenious constructions". Brunel built dockyards, the Great Western Railway (GWR), a series of steamships including the first purpose-built transatlantic steamship, and numerous important bridges and tunnels. His designs revolutionised public transport and modern engineering. Though Brunel's projects were not always successful, they often contained innovative solutions to long-standing engineering problems. During his career, Brunel achieved many engineering firsts, including assisting his father in the building of the first tunnel under a navigable river (the River Thames) and ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Kineton
Kineton is a village and civil parishes in England, civil parish on the River Dene in south-east Warwickshire, England. The village is part of Stratford-on-Avon (district), Stratford-on-Avon district, and in the United Kingdom Census 2001, 2001 census it had a population of 2,278, increasing to 2,337 at the 2011 Census. Kineton is about from the towns of Banbury to the south-east, Warwick and Leamington Spa to the north, and Stratford-upon-Avon to the west. Nearby is the large village of Wellesbourne with its historic Wellesbourne Watermill, water mill, Compton Verney House art gallery, the British Motor Museum at Gaydon, the Burton Dassett Hills country park and the battlefield of Battle of Edgehill, Edgehill. Kineton, in the district historically known as the Vale of the Red Horse, can also be considered to be part of the informal area of Banburyshire. Kineton district council ward covers Gaydon, Lighthorne, Lighthorne Heath, Compton Verney, Combrook, Little Kineton and Ch ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
British Railway Modelling
''British Railway Modelling'' (BRM) is a monthly British magazine about model railways published by Warners Group Publications plc. It has been in publication since 1993, originally under the tagline "A Colourful New Look at Hobby". The magazine has been based in Bourne, Lincolnshire, since its inception. History The magazine was launched in 1993 issue and the first editor was David Brown, an experienced journalist with a passion for model railways. Initially the use of colour throughout the magazine was a key selling point when many other magazines were predominantly printed in black and white. The magazine covered areas traditionally covered by the established model railway press, such as layouts, weathering, kit building and scratch building. From the outset, the magazine featured minority scales and standards. The premier issue had an EM gauge layout on its cover and by its fourth issue featured a 2mm Finescale on the cover, Helsby, Tumill & Haddon, very much a minor s ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
