|
0-4-0
Under the Whyte notation for the classification of steam locomotives, represents one of the simplest possible types, that with two axles and four coupled wheels, all of which are driven. The wheels on the earliest four-coupled locomotives were connected by a single gear wheel, but from 1825 the wheels were usually connected with coupling rods to form a single driven set. The notation 0-4-0T indicates a tank locomotive of this wheel arrangement on which its water and fuel is carried on board the engine itself, rather than in an attached tender. In Britain, the Whyte notation of wheel arrangement was also often used for the classification of electric and diesel-electric locomotives with side-rod-coupled driving wheels. Under the UIC classification used in Europe and, in more recent years, in simplified form in the United States, a 0-4-0 is classified as B (German and Italian) if the axles are connected by side rods or gearing and 020 (French), independent of axle motoring. ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Whyte Notation
The Whyte notation is a classification method for steam locomotives, and some internal combustion locomotives and electric locomotives, by wheel arrangement. It was devised by Frederick Methvan Whyte, and came into use in the early twentieth century following a December 1900 editorial in ''American Engineer and Railroad Journal''. The notation was adopted and remains in use in North America and the United Kingdom to describe the wheel arrangements of steam locomotives, but for modern locomotives, multiple units and trams it has been supplanted by the UIC system in Europe and by the AAR system (essentially a simplification of the UIC system) in North America. However, geared steam locomotives do not use the notation. They are classified by their model and their number of trucks. Structure of the system Basic form The notation in its basic form counts the number of leading wheels, then the number of driving wheels, and finally the number of trailing wheels, numbers ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Fireless Locomotive
A fireless locomotive is a type of locomotive which uses reciprocating engines powered from a reservoir of compressed air or steam, which is filled at intervals from an external source. They offer advantages over conventional steam locomotives of lower cost per unit, cleanliness, and decreased risk from fire or boiler explosion; these are counterbalanced by the need for a source to refill the locomotive, and by the limited range afforded by the reservoir. They were desirable in situations where smoke from a firebox would be too noxious, or where there was risk of fire or explosion. Typical usage was in a mine, or a food or chemical factory. They were also used where a source of air or steam was readily available, and for moving loads within limited areas, such as a switch yard or within an industrial factory. They were eventually replaced for most uses by diesel and battery electric locomotives fitted with protective appliances; these are described as flame-proof locomotives. ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Tram Engine
A tram engine is a steam locomotive specially built, or modified, to run on a street, or roadside, tramway track. Legal requirements In the steam locomotive era, tram engines had to comply with certain legal requirements, although these varied from country to country: * The engine must be governed to a maximum speed of ( in the UK) * No steam or smoke may be emitted * It must be free from the noise produced by blast or clatter * The machinery must be concealed from view at all points above from rail level *Most of the locomotives must have a cab at each end To avoid smoke, the fuel used was coke, rather than coal. To prevent visible emission of steam, two opposite systems were used: * condensing the exhaust steam and returning the condensate to the water tank * Reheating the exhaust steam to make it invisible Builders United Kingdom ;Great Eastern Railway The Great Eastern Railway built ten Class G15 0-4-0T trams from 1883 to 1897 and twelve Class C53 0-6-0T trams ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Dorrigo Steam Railway And Museum
The Dorrigo Steam Railway and Museum in Dorrigo, New South Wales Dorrigo, a small town on the Waterfall Way, is located on the Northern Tablelands, in northern New South Wales, Australia. The town is part of Bellingen local government area. It is approximately north of the state capital, Sydney via the ..., Australia is a large, privately owned collection of railway vehicles and equipment from the railways of New South Wales, covering both Government and private railways. The collection dates from 1878 until 1985. Status The museum was opened very briefly in 1986, but has been described as "not yet open to the public" ever since. History The museum's origins stem from the formation of the Hunter Valley Steam Railway & Museum in 1973 which was formed following the closure of the Glenreagh to Dorrigo branch line the previous year with the aim of restoring the 69 kilometres as a tourist railway. Much of the rolling stock was stored at the former Rhondda Colliery, three ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Tank Engine
A tank locomotive is a steam locomotive which carries its water in one or more on-board water tanks, instead of a more traditional tender. Most tank engines also have bunkers (or fuel tanks) to hold fuel; in a tender-tank locomotive a tender holds some or all of the fuel, and may hold some water also. There are several different types of tank locomotive, distinguished by the position and style of the water tanks and fuel bunkers. The most common type has tanks mounted either side of the boiler. This type originated about 1840 and quickly became popular for industrial tasks, and later for shunting and shorter-distance main line duties. Tank locomotives have advantages and disadvantages compared to traditional locomotives that required a separate tender to carry needed water and fuel. History Origins The first tank locomotive was the ''Novelty'' that ran at the Rainhill Trials in 1829. It was an example of a ''well tank''. However, the more common form of ''side tank' ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Tank Locomotive
A tank locomotive is a steam locomotive which carries its water in one or more on-board water tanks, instead of a more traditional tender (rail), tender. Most tank engines also have Fuel bunker, bunkers (or fuel tanks) to hold fuel; in a #Tender-tank, tender-tank locomotive a tender holds some or all of the fuel, and may hold some water also. There are several different types of tank locomotive, distinguished by the position and style of the water tanks and fuel bunkers. The most common type has tanks mounted either side of the boiler. This type originated about 1840 and quickly became popular for industrial tasks, and later for Shunting (rail), shunting and shorter-distance Main line (railway), main line duties. Tank locomotives have #Advantages and disadvantages, advantages and disadvantages compared to traditional locomotives that required a separate tender to carry needed water and fuel. History Origins The first tank locomotive was the Novelty (locomotive), ''Novelty ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Lancashire Witch
''Lancashire Witch'' was an early steam locomotive built by Robert Stephenson and Company in Newcastle-upon-Tyne in 1828. It was a development of ''Locomotion''. Description ''Lancashire Witch'' was an 0-4-0 locomotive with rear mounted cylinders inclined at 45 degrees driving to the front wheels. The rear wheels were powered via coupling rods. The boiler had two flue tubes and the locomotive burnt coke, aided by bellows on the tender. It was the first locomotive with steel springs. It was the first locomotive built by Robert Stephenson and Company. History The locomotive that was to become ''Lancashire Witch'' was ordered by the board of the Liverpool and Manchester Railway (L&MR) in January 1828. The boiler was to incorporate a series a small flues, this evolved into a large central flue and two smaller side flues bent at the end. Four months after the order the L&MR board transferred the order to the Bolton and Leigh Railway. ''Lancashire Witch'' was used on the Bolt ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Crane Tank Locomotive
A crane tank locomotive (CT) is a steam locomotive fitted with a crane for working in railway workshops, docksides, or other industrial environments. The crane may be fitted at the front, centre or rear. The 'tank' in its name refers to water tanks mounted either side of the boiler, as cranes were usually constructed on tank locomotives (as opposed to tender locomotives) for greater mobility in the confined locations where they were normally used. There is also a crane engine in the museum of Scottish railways Preserved examples * Shelton Iron & Steel Works No. 4101, an built by Dübs & Company built in 1901, entering preservation on the East Somerset Railway in 1970, working 1977-1986 and later sold to the Foxfield Railway, where it entered service in 2010. *''Millfield'', an built by Robert Stephenson & Hawthorns in 1942 (works no.7070), preserved at Bressingham Steam & Gardens. See also * Crane (rail) * NLR crane tank * Shelton Iron & Steel Works No. 4101 * Three ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Sans Pareil
''Sans Pareil'' is a steam locomotive built by Timothy Hackworth which took part in the 1829 Rainhill Trials on the Liverpool and Manchester Railway, held to select a builder of locomotives. The name is French and means 'peerless' or 'without equal'. Design While a capable locomotive for the day, its technology was somewhat antiquated compared to George and Robert Stephenson's ''Rocket'', the winner of the Rainhill Trials and the £500 prize money. Instead of the fire tube boiler of ''Rocket'', ''Sans Pareil'' had a double return flue. To increase the heating surface area, the two flues were joined by a U-shaped tube at the forward end of the boiler; the firebox and chimney were both positioned at the same end, one on either side. ''Sans Pareil'' had two cylinders, mounted vertically at the opposite end to the chimney, and driving one pair of driving wheels directly - the other pair were driven via connecting rods, in the typical steam locomotive fashion. Railhill ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Achenseebahn 2, Jenbach, 2014 (08)
The Achensee Railway (, ) is a long metre gauge railway running between Jenbach () and Seespitz () on Lake Achen in Tyrol (Austria). Within its length it rises some in height, with the steeper sections using the Riggenbach rack system. It is Europe's oldest cog railway which is still steam operated. History In 1886, Theodor Friedrich Freiherr von Dreifuss proposed to connect Jenbach to the Achensee. Despite concerns by villagers in the area, the proposal was supported by the monastery at Fiecht, which owned the Achensee and ran steam boats on the lake. Consent to build the line was given on 1 August 1888 by Emperor Franz Josef. The line was constructed by the Soenderop Company of Berlin. The official opening of the line was on 8 June 1889. The line originally ended a short distance short of the pier for the steamboats as it was intended to run a luggage service between Seespitz station and the pier at an extra charge. The railway was extended to a new station serving the ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Steam Locomotive
A steam locomotive is a locomotive that provides the force to move itself and other vehicles by means of the expansion of steam. It is fuelled by burning combustible material (usually coal, Fuel oil, oil or, rarely, Wood fuel, wood) to heat water in the locomotive's Boiler (power generation), boiler to the point where it becomes gaseous and its volume increases 1,700 times. Functionally, it is a steam engine on wheels. In most locomotives, the steam is admitted alternately to each end of its Steam locomotive components, cylinders in which pistons are mechanically connected to the locomotive's main wheels. Fuel and water supplies are usually carried with the locomotive, either on the locomotive itself or in a Tender (rail), tender coupled to it. #Variations, Variations in this general design include electrically powered boilers, turbines in place of pistons, and using steam generated externally. Steam locomotives were first developed in the United Kingdom of Great Britain an ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Robert Stephenson And Company
Robert Stephenson and Company was a locomotive manufacturing company founded in 1823 in Forth Street, Newcastle upon Tyne in England. It was the first company in the world created specifically to build Steam locomotive, railway engines. Famous early locomotives were Locomotion No. 1, ''Locomotion'' No. 1 and ''Stephenson's Rocket, Rocket''. By 1899, 3,000 locomotives had been built at the Forth Street site, and a new company was formed, Robert Stephenson and Company Limited, and the Darlington works was opened. In 1937, the company merged with R. & W. Hawthorn, Leslie and Company, Hawthorn Leslie to form Robert Stephenson and Hawthorns. In 1944, they became part of English Electric. Foundation and early success The company was set up in 1823 in Forth Street, Newcastle upon Tyne in England by George Stephenson, his son Robert Stephenson, Robert, with Edward Pease (railway pioneer), Edward Pease and Thomas Richardson (businessman), Thomas Richardson. The manager of the works b ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
