Ultrasonic impact treatment
   HOME

TheInfoList



OR:

Ultrasonic impact treatment (UIT) is a
metallurgical Metallurgy is a domain of materials science and engineering that studies the physical and chemical behavior of metallic elements, their inter-metallic compounds, and their mixtures, which are known as alloys. Metallurgy encompasses both the sc ...
processing technique, similar to
work hardening In materials science, work hardening, also known as strain hardening, is the strengthening of a metal or polymer by plastic deformation. Work hardening may be desirable, undesirable, or inconsequential, depending on the context. This strengt ...
, in which
ultrasonic Ultrasound is sound waves with frequencies higher than the upper audible limit of human hearing. Ultrasound is not different from "normal" (audible) sound in its physical properties, except that humans cannot hear it. This limit varies fr ...
energy is applied to a metal object. This technique is part of the High Frequency Mechanical Impact (HFMI) processes. Other acronyms are also equivalent: Ultrasonic Needle Peening (UNP), Ultrasonic Peening (UP). Ultrasonic impact treatment can result in controlled residual compressive stress,
grain refinement In materials science, grain-boundary strengthening (or Hall–Petch strengthening) is a method of strengthening materials by changing their average crystallite (grain) size. It is based on the observation that grain boundaries are insurmountabl ...
and grain size reduction. Low and high cycle fatigue are enhanced and have been documented to provide increases up to ten times greater than non-UIT specimens.


Theory

In UIT,
ultrasonic wave Ultrasound is sound waves with frequencies higher than the upper audible limit of human hearing. Ultrasound is not different from "normal" (audible) sound in its physical properties, except that humans cannot hear it. This limit varies ...
s are produced by an electro-mechanical
ultrasonic transducer Ultrasonic transducers and ultrasonic sensors are devices that generate or sense ultrasound energy. They can be divided into three broad categories: transmitters, receivers and transceivers. Transmitters convert electrical signals into ultrasoun ...
, and applied to a workpiece. An acoustically tuned
resonator A resonator is a device or system that exhibits resonance or resonant behavior. That is, it naturally oscillates with greater amplitude at some frequencies, called resonant frequencies, than at other frequencies. The oscillations in a resonator ...
bar is caused to vibrate by energizing it with a magnetostrictive or
Piezoelectric Piezoelectricity (, ) is the electric charge that accumulates in certain solid materials—such as crystals, certain ceramics, and biological matter such as bone, DNA, and various proteins—in response to applied mechanical stress. The word '' ...
ultrasonic transducer. The energy generated from these high frequency impulses is imparted to the treated surface through the contact of specially designed steel pins. These transfer pins are free to move axially between the resonant body and the treated surface. When the tool, made up of the ultrasonic transducer, pins and other components, comes into contact with the work piece it acoustically couples with the work piece, creating harmonic
resonance Resonance describes the phenomenon of increased amplitude that occurs when the frequency of an applied Periodic function, periodic force (or a Fourier analysis, Fourier component of it) is equal or close to a natural frequency of the system ...
. This harmonic resonance is performed at a carefully calibrated
frequency Frequency is the number of occurrences of a repeating event per unit of time. It is also occasionally referred to as ''temporal frequency'' for clarity, and is distinct from ''angular frequency''. Frequency is measured in hertz (Hz) which is eq ...
, to which metals respond very favorably, resulting in compressive residual stress, stress relief and grain structure improvements. Depending on the desired effects of treatment a combination of different frequencies and displacement amplitude is applied. Depending on the tool and the Original Equipment Manufacturer, these frequencies range between 15 and 55  kHz, with the displacement amplitude of the resonant body of between .


Application

UIT is highly controllable. Incorporating a programmable logic controller (PLC) or a Digital Ultrasonic Generator, the frequency and amplitude of UIT are easily set and maintained, thus removing a significant portion of operator dependency. UIT can also be mechanically controlled, thus providing repeatability of results from one application to the next. Examples of mechanical control employed with UIT include: *CNC
milling machines Milling is the process of machining using rotary cutters to remove material by advancing a cutter into a workpiece. This may be done by varying direction on one or several axes, cutter head speed, and pressure. Milling covers a wide variety of d ...
* Lathes *Robotic control *Weld tractors With these types of controlled applications, the surface finish of the work piece is highly controllable. For many applications, UIT is most effectively employed by hand. The high portability of the UIT system enables travel to austere locations and hard to reach places. The flexibility that is facilitated by variations in the tool configuration (such as angle-peening-head) ensures that access to very tight locations is possible. UIT's effectiveness has been illustrated on the following metals, among others: *
Aluminium Aluminium (aluminum in American and Canadian English) is a chemical element with the symbol Al and atomic number 13. Aluminium has a density lower than those of other common metals, at approximately one third that of steel. I ...
(including sensitized Aluminium) * Bronze *
Cobalt Cobalt is a chemical element with the symbol Co and atomic number 27. As with nickel, cobalt is found in the Earth's crust only in a chemically combined form, save for small deposits found in alloys of natural meteoric iron. The free element, p ...
alloys *
Nickel Nickel is a chemical element with symbol Ni and atomic number 28. It is a silvery-white lustrous metal with a slight golden tinge. Nickel is a hard and ductile transition metal. Pure nickel is chemically reactive but large pieces are slow ...
alloys *Steels ** Carbon steel ** Stainless steel **
High-strength low-alloy steel High-strength low-alloy steel (HSLA) is a type of alloy steel that provides better mechanical properties or greater resistance to corrosion than carbon steel. HSLA steels vary from other steels in that they are not made to meet a specific chemica ...
** Manganese steel *
Titanium Titanium is a chemical element with the Symbol (chemistry), symbol Ti and atomic number 22. Found in nature only as an oxide, it can be reduced to produce a lustrous transition metal with a silver color, low density, and high strength, resista ...


History

UIT was originally developed in 1972 and has since been perfected by a team of
Russia Russia (, , ), or the Russian Federation, is a transcontinental country spanning Eastern Europe and Northern Asia. It is the largest country in the world, with its internationally recognised territory covering , and encompassing one-eig ...
n scientists under the leadership of Dr. Efim Statnikov. Originally developed and utilized to enhance the fatigue and corrosion attributes of ship and submarine structures, UIT has been utilized in aerospace, mining, offshore drilling, shipbuilding, infrastructure, automotive, energy production and other industries. Different industrial solutions exist nowadays and are commercialized by a limited number of Original Equipment Manufacturers worldwide.


Practical applications

UIT enables life extension of steel bridges. This technique has been employed in numerous US states as well as other nations. The result is a greatly reduced cost of infrastructure. UIT has been certified for this use by AASHTO. The use of UIT on
dragline A dragline excavator is a piece of heavy equipment used in civil engineering and surface mining. Draglines fall into two broad categories: those that are based on standard, lifting cranes, and the heavy units which have to be built on-site. ...
s and other heavy equipment in the
mining industry Mining is the extraction of valuable minerals or other geological materials from the Earth, usually from an ore body, lode, vein, seam, reef, or placer deposit. The exploitation of these deposits for raw material is based on the economic via ...
has resulted in increased production and has decreased downtime and maintenance costs. UIT is employed on drive shafts and crank shafts in a number of industries. Results show that UIT increases shaft life by over a factor of 3. The
US Navy The United States Navy (USN) is the maritime service branch of the United States Armed Forces and one of the eight uniformed services of the United States. It is the largest and most powerful navy in the world, with the estimated tonnage ...
uses UIT to address cracked areas in certain aluminum decks. Without UIT, crack repairs resulted in almost immediate re-cracking. With UIT, repairs have shown to last over eight months without cracks.


See also

*
High frequency impact treatment The high-frequency impact treatment or HiFIT – Method is the treatment of welded steel constructions at the weld transition to increase the fatigue strength. Features The durability and life of dynamically loaded, welded steel structures is ...
*
Corrosion fatigue Corrosion fatigue is fatigue in a corrosive environment. It is the mechanical degradation of a material under the joint action of corrosion and cyclic loading. Nearly all engineering structures experience some form of alternating stress, and are ...
* Stress corrosion cracking


References

{{Reflist


Further reading

*Fisher, J.W., E.Sh. Statnikov, L. Tehini, Fatigue Strength Enhancement by Means of Weld Design Change and the Application of Ultrasonic Impact treatment, Proc. of Intl. Symp. On Steel Bridges, Chicago (2001). *Haagensen, P.J., Weld Improvement Methods – Applications and Implementations in Design Codes, invited paper at the Conference on Fatigue of Welded Structures, Senlis, Paris, France, 12–14 June 1996. *Prokopenko, G.I., T.A. Lyatun, Study of Surface Hardening Conditions by Means of Ultrasound, in: Physics and Chemistry of Material Processing, No. 3, p 91, 1977. *Blaha, F., B.Langenecker.“Dehnung von Zink-Kristallen unter Ultraschalleinwirkung”, Zeitschrift die Naturwissenschaften, 20, 556, 1955. *Konovalov, E.G., V.M. Drozdov, M.D. Tyavlovski, Dynamic Strength of Metals (in Russian), Nauka i Tekhnika, Minsk, 1969. *Kazantsev, V.F., Basic Physics of Ultrasonic Action on Solid Body Processing (in Russian). Doctoral thesis, AKIN, Moscow, 1980, pp. 12–44. *Statnikov, E.S., Development and Study of Ultrasonic Specific-purpose Devices, Thesis, Academician N.N. Andreyev Acoustic Institute, Academy of Sciences of the USSR, 1982. *Severdenko, V.P., E.G. Konovalov, E.Sh. Statnikov et al., Study of Mechanical Properties of New Materials under Ultrasonic Oscillations, Report # 21-971, FTI Acad. Nauk of BSSR,Minsk (1966). *Statnikov, E.Sh., Activation of Deformation Process under Ultrasonic Effect,. Scientific and Technical Conference “XXX Lomonosov Readings”, Sevmashvtuz, Severodvinsk (2001). IIW PUBLICATIONS: * Increasing the Fatigue Strength of Welded Joints in Cyclic Compression. 47th Annual Assembly of the International Institute of Welding. IIW Doc. XIII-1569-94, Peking, 1994. Y. Kudryavtzev, V.I. Tryufyakov, P.P. Mikheev, E. S. Statnikov. * Improvement of Fatigue Strength of Welded Joint (in High Strength Steels and Aluminium Alloys) by Means of Ultrasonic Hammer Peening. 48th Annual Assembly of the International Institute of Welding. IIW Doc. XIII-1594-95, Stockholm, 1995. J.J. Janosch, H. Koneczny, S. Debiez, E. S. Statnikov, V.I. Tryufyakov, P.P. Mikheev. * Ultrasonic Impact Treatment of Welded Joints. 48th Annual Assembly of the International Institute of Welding. IIW Doc. XIII-1609-95, Stockholm, 1995. V.I. Trufyakov, P.P. Mikheev, Yu. Kudryavtzev, E. S. Statnikov. * Specification for Weld Toe Improvement by Means of Ultrasonic Impact Treatment. 49th Annual Assembly of the International Institute of Welding. IIW Doc. XIII-1617-96, Budapest, 1996. E. S. Statnikov, V.I. Trufyakov, P.P. Mikheev Yu. Kudryavtzev. * Ultrasonic Impact Treatment (UIT) of Welded Joints. 49th Annual Assembly of the International Institute of Welding, Budapest, 1996., E. S. Statnikov. * Applications of Operational Ultrasonic Impact Treatment (UIT) Technology in Production of Welded Joints. 50th Annual Assembly of the International Institute of Welding. IIW Doc. XIII-1667-97, San-Francisco, 1997. E.S. Statnikov. * Comparison of Efficiency and Processibility of Post-Weld Deformation Methods for Increase in Fatigue Strength of Welded Joints. 50th Annual Assembly of the International Institute of Welding. IIW Doc. XIII-1668-97, San-Francisco, 1997. E. S. Statnikov. * The Efficiency of Ultrasonic Impact Treatment (UIT) for Improving the Fatigue Strength of Welded Joints. 51stAnnual Assembly of the International Institute of Welding. IIW Doc. XIII-1745-98, Hamburg, 1998. V.I. Troufyakov, E.S. Statnikov, P.P. Mikheev, A.Z. Kuzmenko. * Introductory Fatigue Tests on Welded Joints in High Strength Steel and Aluminium Treated by Various Improvement Methods Including Ultrasonic Impact Treatment (UIT). 51st Annual Assembly of the International Institute of Welding. IIW Doc. XIII-1748-98, Hamburg, 1998. P.J. Haagensen, E.S. Statnikov, L. Lopez-Martinez. * Repair of Fatigue Cracks. Working Group 5. 51st Annual Assembly of the International Institute of Welding. IIW Doc. XIII-WG5-18-98, Hamburg, 1998. E.S. Statnikov, L. Kelner, J. Baker, H. Croft, V.I. Dvoretsky, V.O. Muktepavel. * Guide for Application of Ultrasonic Impact Treatment Improving Fatigue Life of Welded Structures. 52nd Annual Assembly of the International Institute of Welding. IIW Doc. XIII-1757-99, Lisbon, 1999. E.S. Statnikov. * Comparison of Ultrasonic Impact Treatment (UIT) and other Fatigue Life Improvement Methods. 53rd Annual Assembly of the International Institute of Welding. IIW-Doc. XIII-1817-00, Florence, 2000. E.S. Statnikov, V.O. Muktepavel, A. Blomqvist. * Repair of Fatigue Welded Structures Repair Case Study. Working Group 5. 54th Annual Assembly of the International Institute of Welding. IIW Doc. XIII-WG5-1873-01, Slovenia, 2001. E.S. Statnikov, L. Tehini. * Fatigue Strength Improvement of Bridge Girders by Ultrasonic Impact Treatment (UIT). 55th Annual Assembly of the International Institute of Welding. IIW Doc.XIII-1916-02, Copenhagen, 2002. J.W. Fisher, E.S. Statnikov, L. Tehini. * Comparison of the Improvement in Corrosion Fatigue Strength of Weld Repaired Marine Cu 3-grade Bronze Propellers by Ultrasonic Impact Treatment (UIT) or Heat Treatment. 56th Annual Assembly of the International Institute of Welding. IIW. Doc. XIII-1964-03, Bucharest, 2003. E.S. Statnikov, V.O. Muktepavel, V.N. Vityazev, V.I. Trufyakov, V.S. Kovalchuk, P. Haagensen. * The influence of ultrasonic impact treatment on fatigue behaviour of welded joints in high strength steel. 56th Annual Assembly of the International Institute of Welding, IIW-Doc. XIII-1976-03, Bucharest, 2003. André Galtier, E.S. Statnikov. * Fatigue strength of a longitudinal attachment improved by ultrasonic impact treatment. 56th Annual Assembly of the International Institute of Welding. IIW. Doc.XIII-1990-03, Bucharest, 2003. Veli-Matti Lihavainen, Gary Marquis, E.S. Statnikov. * Physics and Mechanism of Ultrasonic Impact Treatment. 57th Annual Assembly of the International Institute of Welding. IIW Doc. XIII-2004-04, Osaka, 2004, E. S. Statnikov. * Comparison of the Efficiency of 27, 36 and 44 kHz UIT Tools. 57th Annual Assembly of the International Institute of Welding. IIW Doc. XIII-2005, Osaka, 2004. E.S. Statnikov, V.N. Vityazev, O.V. Korolkov. * Improvement in Quality and Reliability of Structures by Means of UIT Esonix. 58th Annual Assembly of the International Institute of Welding. IIW Doc. XIII-2049-05, Prague, 2005. E. S. Statnikov. * Ultrasonic Impact Treatment versus Ultrasonic Peening. 58th Annual Assembly of the International Institute of Welding. IIW Doc. XIII-2050-05. Prague, 2005. E. S. Statnikov. * Physics and Mechanism of Ultrasonic Impact. 59th Annual Assembly of the International Institute of Welding. IIW Doc. XIII-2096-06, Quebec, 2006. E .S. Statnikov, O.V. Korolkov, V.N.Vityazev. * On the Assessment of Ultrasonic Impact Treatment Effect on Fatigue (Discussion of some experimental results). 59th Annual Assembly of the International Institute of Welding. IIW Doc. XIII-2097-06, Quebec, 2006. E. S. Statnikov, V.Y. Korostel. * Development of Esonix Ultrasonic Impact Treatment Techniques. 59th Annual Assembly of the International Institute of Welding. IIW Doc. XIII-2098-06, Quebec, 2006. E.S. Statnikov, V.Y. Korostel, N.Vekshin, G. Marquis. * Fatigue Strength Improvement of Thin Stainless Steel Specimens by UIT. 59th Annual Assembly of the International Institute of Welding. IIW Doc. XIII-2104-06, Quebec, 2006. L Huhtala, V-M Lihavainen, G Marquis, E. S. Statnikov, V.Y. Korostel, S.J. Maddox. * On the Use of Ultrasound to Accelerate Fatigue Testing. 59th Annual Assembly of the International Institute of Welding. IIW Doc. XIII-2106-06, Quebec, 2006. E.S. Statnikov, V.Y. Korostel. * UIT Application for Angular Distortion Compensation in Welded T-joints. 59th Annual Assembly of the International Institute of Welding. IIW Doc. XIII-2107-06, Quebec, 2006. E.S. Statnikov, V.Y. Korostel, W. Fricke. * On Identify in UIT Preparation for Comparative Testing and Field Application. 60th Annual Assembly of the International Institute of Welding. IIW Doc. XIII-2180-07, Dubrovnik, 2007. E.S. Statnikov, V.Y. Korostel, A.D. Manelik. * The use of ultrasound to accelerate fatigue testing during assessment of the UIT effectiveness. 60th Annual Assembly of the International Institute of Welding. IIW Doc. XIII-2182-07, Dubrovnik, 2007. E.S. Statnikov, V.Y. Korostel. * UIT application for angular distortion compensation in welded T-joints. 60th Annual Assembly of the International Institute of Welding. IIW Doc. X-1603-07, Dubrovnik, 2007. E.S. Statnikov, Wolfgang Fricke. * Inventing Ultrasonic Impact Technology and its Industry Impact. 63rd Annual Assembly of the International Institute of Welding, IIW Doc. XIII-2320-10, Istanbul, 2010. L. Kelner, D. Sharman.


External links

*http://www.appliedultrasonics.com/pdf/pdf8.pdf *http://www.appliedultrasonics.com/pdf/pdf2.pdf *http://www.sonats-et.com/page_23-needle-peening.html Corrosion prevention Metallurgical processes Metalworking