1930s SINGER treadle table restored by 3FTERS

A treadle (from oe, tredan, "to tread") is a mechanism operated with a

pedal A pedal (from the Latin '' pes'' ''pedis'', "foot") is a lever designed to be operated by foot and may refer to: Computers and other equipment * Footmouse, a foot-operated computer mouse * In medical transcription, a pedal is used to control p ...

for converting

reciprocating motion Reciprocating motion, also called reciprocation, is a repetitive up-and-down or back-and-forth linear motion. It is found in a wide range of mechanisms, including reciprocating engines and pumps. The two opposite motions that comprise a single r ...

into rotating motion. Along with cranks,

treadmill A treadmill is a device generally used for walking, running, or climbing while staying in the same place. Treadmills were introduced before the development of powered machines to harness the power of animals or humans to do work, often a type o ...

s, and

treadwheel A treadwheel, or treadmill, is a form of engine typically powered by humans. It may resemble a water wheel in appearance, and can be worked either by a human treading paddles set into its circumference (treadmill), or by a human or animal standing ...

s, treadles allow human and

animal Animals are multicellular, eukaryotic organisms in the Kingdom (biology), biological kingdom Animalia. With few exceptions, animals Heterotroph, consume organic material, Cellular respiration#Aerobic respiration, breathe oxygen, are Motilit ...

machine power in the absence of

electricity Electricity is the set of physical phenomena associated with the presence and motion of matter that has a property of electric charge. Electricity is related to magnetism, both being part of the phenomenon of electromagnetism, as describ ...

. Before the widespread availability of electric power, treadles were widely used to power a range of machines. They may still be used as a matter of preference or in environments where electric power is not available.

Operation and uses

A treadle is operated by pressing down on its pedal with one or both feet, causing a rocking motion. This movement can then be stored as rotational motion via a crankshaft driving a

flywheel A flywheel is a mechanical device which uses the conservation of angular momentum to store rotational energy; a form of kinetic energy proportional to the product of its moment of inertia and the square of its rotational speed. In particular, as ...

. Alternatively, energy can be stored in a spring as in the

pole lathe A pole lathe, also known as a springpole lathe, is a wood-turning lathe that uses the elasticity within a long pole as a return spring for a treadle. Pressing the treadle pulls on a cord that is usually wrapped around the piece of wood or billet be ...

Treadles were once used extensively to power most machines including lathes,

rotating Rotation, or spin, is the circular movement of an object around a '' central axis''. A two-dimensional rotating object has only one possible central axis and can rotate in either a clockwise or counterclockwise direction. A three-dimensional ...

reciprocating saw A reciprocating saw is a type of machine-powered saw in which the cutting action is achieved through a push-and-pull ("reciprocating") motion of the blade. The original trade name Sawzall is often used in the United States, where Milwaukee Electr ...

spinning wheel A spinning wheel is a device for spinning thread or yarn from fibres. It was fundamental to the cotton textile industry prior to the Industrial Revolution. It laid the foundations for later machinery such as the spinning jenny and spinning f ...

s, looms, and sewing machines. The last use was popularized by

Elias Howe Elias Howe Jr. (; July 9, 1819October 3, 1867) was an American inventor best known for his creation of the modern lockstitch sewing machine. Early life Elias Howe Jr. was born on July 9, 1819, to Dr. Elias Howe Sr. and Polly (Bemis) Howe in ...

and

Isaac Singer Isaac Merritt Singer (October 27, 1811 – July 23, 1875) was an American inventor, actor, and businessman. He made important improvements in the design of the sewing machine and was the founder of what became one of the first American multi-n ...

in the eponymous Singer sewing machines. Today the use of treadle-powered machines is mostly relegated to hobbyists and historical re-enactors, as well as in areas of the developing world where other forms of power remain unavailable. Dictation using cylinder phonograph

Operation and uses

See also