A tower testing station is a special plant for testing various design for

tower A tower is a tall structure, taller than it is wide, often by a significant factor. Towers are distinguished from masts by their lack of guy-wires and are therefore, along with tall buildings, self-supporting structures. Towers are specifi ...

s for

transmission line In electrical engineering, a transmission line is a specialized cable or other structure designed to conduct electromagnetic waves in a contained manner. The term applies when the conductors are long enough that the wave nature of the transmi ...

s and similar uses. A tower testing station consists of two steel stands and one or more foundations, on which a sample of the tower can be built. The number of test conditions is normally limited to between six and eight individual cases, with loading condition such as reduced wind and ice. The towers to be tested are erected on rigid foundation and the wire ropes attached to the loading point required. Loading may either be applied by 'dead' weights using scale pans, winches or hydraulic rams. In the latter cases a load cell or dynamometer is placed in the rigging adjacent to the point of loading at the structure. The loading methods induce strain by pulling cables away from the tower to the specified loads. The pulling load is indicated through a strain gauge placed on the pulling point. Loading points on a tower naturally encompasses longitudinal, transverse and vertical components, either as individual or a combined resultant load. The degree of sophistication of the control equipment for the application and recording of the load varies considerably at individual test stations. From individual load point application of individual load components with corresponding dial gauges to electronic equipment capable of applying all the loads with constant data recording facilities. The test set up is made to conform to the design specifications and verify the adequacy of the main components of the structure and their connections to withstand the static design loads specified for that particular structure as an individual entity under controlled conditions. It furnishes insight into actual stress distribution of unique configurations, fit-up verification, performance of the structure in a deflected position and other benefits.

Locations of tower testing stations

* Chungju, South Korea
BOSUNG POWERTEC CO.,LTD.
* Moscow, Russia, ORGRESbr>
*

Mannheim, Germany Mannheim (; Palatine German: or ), officially the University City of Mannheim (german: Universitätsstadt Mannheim), is the second-largest city in the German state of Baden-Württemberg after the state capital of Stuttgart, and Germany's 2 ...

ABB Group ABB Ltd. is a Swedish- Swiss multinational corporation headquartered in Zürich, Switzerland. The company was formed in 1988 when Sweden's Allmänna Svenska Elektriska Aktiebolaget (ASEA) and Switzerland's Brown, Boveri & Cie merged to crea ...

* Livorno, Italy
Tower Test srl
*

Seville, Spain Seville (; es, Sevilla, ) is the capital and largest city of the Spanish autonomous community of Andalusia and the province of Seville. It is situated on the lower reaches of the River Guadalquivir, in the southwest of the Iberian Peninsula ...

Eucomsa
*

Toronto Toronto ( ; or ) is the capital city of the Canadian province of Ontario. With a recorded population of 2,794,356 in 2021, it is the most populous city in Canada and the fourth most populous city in North America. The city is the anch ...

, Ontario, Canada
Kinectrics
* Vashi, Jaipur, Jabalpur, India

*

Bucharest, Romania Bucharest ( , ; ro, București ) is the capital and largest city of Romania, as well as its cultural, industrial, and financial centre. It is located in the southeast of the country, on the banks of the Dâmbovița River, less than north of ...

* Liangxiang, China

* Butibori, Nagpur, India

* Betim, Betim, Minas Gerais, Brazil

* Kanchipuram, Chennai, India, Larsen & Toubro * IRAN, NRI (Niroo Research Institute)

*

Riyadh, Saudi Arabia Riyadh (, ar, الرياض, 'ar-Riyāḍ, lit.: 'The Gardens' Najdi pronunciation: ), formerly known as Hajr al-Yamamah, is the capital and largest city of Saudi Arabia. It is also the capital of the Riyadh Province and the centre of the ...

, Al-Babtain Tower Testing Statio

* Linhares, Linhares, Espírito Santo, Brazil, Brametal Test Statio

Towers {{sci-stub