Steering linkage
   HOME

TheInfoList



OR:

A steering linkage is the part of an automotive steering system that connects to the front wheels. The steering linkage which connects the steering gearbox to the front wheels consists of a number of rods. These rods are connected with a socket arrangement similar to a ball joint, called a tie rod end, allowing the linkage to move back and forth freely so that the steering effort will not interfere with the vehicles up-and-down motion as the wheel moves over roads . The steering gears are attached to a rear rod which moves when the steering wheel is turned. The rear rod is supported at one end.


Technology

Most modern cars have a full mechanical steering linkage system, but a recent innovation is the steer by wire system.


Example Simulations

Ackerman Steering Linkage.gif, Ackermann steering Bell-Crank Steering Linkage.gif, Bell-crank steering Rack-And-Pinion Steering Linkage.gif, Rack-and-pinion steering Short rack steering.gif, Short rack-and-pinion steering


See also

*
Bump steer Bump steer is the term for the tendency of the wheel of a car to steer itself as it moves through the suspension stroke. Bump steer causes a vehicle to turn itself when one wheel hits a bump or falls down into a hole or rut. Excessive bump steer ...
* Parallelogram steering linkage


References

{{reflist


External links


Video clips


Movement of a steering linkage
Automotive steering technologies Linkages (mechanical)