Spyderco

Spyderco is an American cutlery company based in Golden, Colorado, producing knives and knife sharpeners. Spyderco pioneered many features that are now common in folding knives, including the pocket clip, serrations, and the opening hole. Spyderco has collaborated with 30 custom knife makers, athletes, and self-defense instructors for designs and innovated the usage of 20 different blade materials.

History

Spyderco was founded by Sal Glesser. The name Spyderco was coined after Glesser noticed that many high performance sports cars had 'Spyder' in the name; which inspired the name Spyderco to signify high performance cutting tools. The first product Spyderco produced was the Portable Hand in 1976, this "spider-shaped device", was a series of angles, ball joints and alligator clips that helped people such as jewelers and hobbyists to work with small parts. Spyderco's founder, Sal Glesser, and his wife Gail, converted an old bread delivery truck into a motor-home and traveled to shows. As they became more successful, they graduated from the bread truck to a truck and trailer. They settled in Golden in November 1978. The firm began producing knife sharpeners in 1978 and produced their first folding knife, the C01 Worker, in 1981; this was the first to feature a round hole in the blade designed for fast, one-handed and ambidextrous opening, which is now the company's trademark. Additionally, the company claims that this was the first knife to feature a pocket clip on the right side of the handle.Shackleford, Steve. Top Knife Innovations of the Past 50 Years, ''Blade Magazine'', August 2006Shackleford, Steve."The Most Comfortable Carry Knife of All",''Blade Magazine'', May 1997

Products

Most knives produced by Spyderco are folding knives of various designs, blade steels, handle materials, and locking mechanisms (including two patented proprietary locks); however, they have also produced fixed-blade knives for various purposes.

The firm's knives are made with a plain edge, a partially serrated edge, or a fully serrated "Spyder Edge" configuration.Massad Ayoob "To The Rescue". American Handgunner. May 2001. FindArticles.com. 07 Feb. 2008. http://findarticles.com/p/articles/mi_m0BTT/is_152_25/ai_72293240 Their most common handle material is FRN (Fiberglass Reinforced Nylon) and G10, although they make knives with steel handles as well as some limited editions with handles from various other materials.

A large part of the firm's knife production is outsourced to foreign contractors in countries such as Japan, Taiwan, Italy, and China. (though many of their flagship knives are made in the US) Knives made with CPM S30V steel were previously all made in Golden, Colorado; however, Spyderco began shipping CPM-S30V to Taiwan to have their highest end knives produced there using this steel.

Spyderco knives are popular with many markets including private citizens, fire and rescue personnel and law enforcement officers.

For his many influences in tactical knife design (most notably the pocket clip, serrations, and opening hole) and many collaborations with custom knife makers, Spyderco's President, Sal Glesser, was inducted into the ''Blade'' magazine Cutlery Hall of Fame at the 2000 Blade Show in Atlanta, Georgia.

Blade steels

Spyderco has experimented with new blade steels over the years. In 1994, it was the first company to use powder metallurgy in a production knife (in the form of Crucible's S60V tool steel), and the first knife company to use H-1 steel in a folding knife.Delavigne (2000) p.112

Spyderco'
current Steel Chart PDF

The blade steel used by the company over the years include:

154CM an American stainless cutlery steel

52100, a ball bearing steel used in the first run of the Mule project.

8Cr13MoV, a Chinese stainless steel tempered at the RC56 to RC58 range and used in the Tenacious, Persistence, Ambitious, Resilience, Grasshopper, Kiwi3 and Byrd lines of knives. Often compared to AUS-8, but with slightly more carbon.

9Cr18Mo, a Chinese stainless steel used mostly in high-end barbering scissors and surgical tools.

440C, a stainless steel known for corrosion resistance and ease of sharpening.

Aogami Super Blue (青紙スーパー), a Japanese high-end steel made by Hitachi. The "Blue" refers not to the color of the steel itself, but the color of the paper in which the raw steel comes wrapped.

ATS-55, a performance stainless steel similar to ATS-34 with the molybdenum reduced, used only by Spyderco for knife steels until the early 2000s.

AUS-6, similar in quality to 440a, used as a "budget" steel in early Spyderco models.

AUS-8, a frequently used Japanese steel, which is known for taking a very fine edge, due to the inclusion of vanadium. Sharpens easily, and has moderate edge holding and corrosion resistance.

AUS-10, a Japanese stainless steel series made by Aichi with the same carbon content as 440C but with slightly less chromium.

BG-42, a high performance stainless steel formulated for ball bearings, similar to ATS-34 (same composition, but with added vanadium), which has similar properties.

CPM S30V steel an American powder-metallurgy, high-carbide steel developed for the cutlery market.

CPM-M4 (aka AISI M4), usually tempered to 62-65 HRC, a high-speed steel with combination of high carbon, molybdenum, vanadium, and tungsten for excellent wear resistance and toughness; a powder-metallurgical, non-stainless steel.

CPM-S60V, (a.k.a. 440V, a.k.a. CPMT440V), a modern American super-steel that is wear resistant, but difficult to sharpen. Unfortunately the low level of toughness means that it can only be hardened to around 56 RC, causing the edge-holding performance to be diminished.

CPM-S90V (a.k.a. 420V), similar to Crucible's S60V but designed to be more wear resistant with a very high carbide volume and high vanadium content. Appreciated for extreme edge-holding. S90V was featured in a sprint run of Spyderco's Military in 2004. Since then it has been used in several sprint runs in knives like the Manix 2 and Paramilitary 2. While S90V holds an edge better than S30V, both are usually hardened to about 59–61 RC.

CTS-20CP, Carpenter Technology's version of S90V, with slightly reduced chromium. Features incredible wear-resistance and edge-holding, hardened to about 60 RC.

CTS-BD1, Carpenter's versions of Gin-1 with improved chemistry. Originally featured in a Mule Team fixed blade.

CTS-XHP, made by Carpenter Technology. Often referred to as a stainless version of D2.

D2, a high performance tool steel that features outstanding wear resistance. Spyderco uses Crucible's version of D2, which is a powder metallurgy version. CPM-D2 is found in a sprint run version of the Military model.

G2, a.k.a. GIN-1 (銀紙１号), a Hitachi-made low cost stainless steel comparable to, but softer than, AUS-8. Generally hardened in the mid to high RC 50s. A tough, corrosion-resistant steel.

H-1, a steel which is ideal for marine applications, because it substitutes nitrogen for carbon and thus is completely rust-proof in any normal environment such as salt water exposure, though can still oxidize if exposed to extreme heat and chemical attack. It grinds, scratches and has edge retention similar to the low carbide steels such as AUS-6. It is a precipitation hardening steel, which means it hardens by the mechanical process of grinding the steel, rather than by heat treating.

MBS-26, a Japanese tainlesssteel, very fine grained with high corrosion resistance used in the Catcherman and in most kitchen knives by Spyderco.

N690CO, an Austrian stainless steel similar to VG-10. Currently found in the Squeak and previously used in Spydercos manufactured by Fox Cutlery.

VG-10 (V金10号), a Japanese steel developed for the horticulture industry by Takefu, often hardened around the RC60 range. Reported to have better corrosion resistance but less edge retention than S30V. Appreciated for taking a fine edge, and being easy to sharpen, while still holding an edge well. Used in most of the firm's Japanese-made knives.

ZDP-189, a premium Japanese powdered super-steel made by Hitachi, hardened to RC 62–67, with very high carbide volume. Has excellent edge-holding ability, although it trails behind S90V and S110V in that regard.

Collaborations

Through the years, Spyderco has collaborated with numerous custom knife makers in the design of various models.Pacella, Gerard (2002), 100 Legendary Knives, Iola, USA, Krause Publications, 145.

List of collaborators

* Jens Anso
* Massad Ayoob
* Eduard Bradichansky
* Gayle Bradley
* Darriel Caston
* Peter Carrey
* Frank CentofanteDelavigne (2000) p.131
* Chris Claycombe
* Alexandru Diaconescu
* Ernest EmersonDelavigne (2000) p.163
* Bram Frank
* Wayne Goddard
* Peter Herbst
* D'Alton HolderDelavigne (2000) p.150
* Jess Horn
* Michael Janich
* James A. KeatingDelavigne (2000) p.88
* Szabo Laszlo
* Chad Los Banos
* Bob LumDelavigne (2000) p.149
* R. J. Martin
* William F. MoranDelavigne (2000) p.42
* Ken Onion
* Philippe Perotti
* Fred Perrin
* Peter Rassenti
* Ed Schempp
* Ed Scott
* Jot Singh KhalsaDelavigne (2000) p.145
* Marcin Slysz
* JD SmithDelavigne (2000) p.172
* Mike Snody
* Brad Southard
* Laci Szabo
* Bob TerzuolaDelavigne (2000) p.36
* Sacha Thiel
* Warren ThomasN. Morris "Knife with Taurus 24/7". ''Guns Magazine''. January 2005. FindArticles.com. 07 Feb. 2008. http://findarticles.com/p/articles/mi_m0BQY/is_1_51/ai_n7581238
* Ralph Turnbull
* Ulrich Hennicke Germany/Ulize C161GP
* Butch VallottonSpyderco Product Details - Sub-Hilt Folder
* Howard VieleDelavigne (2000) p. 141
* Michael WalkerDelavigne (2000) p. 125
* Tim Wegner
* Tim ZowadaDelavigne (2000) p. 215

Sprint runs

Spyderco often produces limited edition models, referred to as sprint runs. These limited runs are generally versions of discontinued models with different blade and handle materials, though some are completely new models, such as the Kopa; a "dress knife" with several variants, each with a different handle material such as micarta, evrina, and tiger coral.

Byrd brand

Spyderco designs and produces knives under the Byrd brand. These knives use high quality materials and are manufactured in China, allowing much lower prices while retaining most of Spyderco's quality.Mroz, Ralph. "Soaring Byrds". ''Tactical Knives Magazine''. November 2008. Volume 15,(6) p. 80 To differentiate the brands, Byrd knives have a "comet" shaped opening hole in the blade, rather than the trademark round hole found on Spyderco models.

To date, Byrd knives have featured 8Cr13MoV as their blade steel except for the Byrd Catbyrd titanium which uses 9Cr18Mo steel. The brand's early knives were marked 440C, but tests found that the steel was something entirely different from American 440C. This steel was closer to AUS-8 than American 440C, and also went by the name 8Cr13MoV.

The first Byrd models, the Cara Cara, Meadowlark, Flight, Pelican, and Crossbill, initially featured stainless steel handles. Newer Byrds have featured aluminum, fiberglass reinforced nylon (FRN), and G10 handles.

References

*
*

External links

*

Spyderco's official forum

{{Knives

Knife manufacturing companies
Companies based in Golden, Colorado