Skateboard
   HOME

TheInfoList



OR:

A skateboard is a type of
sports equipment Sports equipment, sporting equipment, also called sporting goods, are the tools, materials, apparel, and gear used to compete in a sport and varies depending on the sport. The equipment ranges from balls, nets, and protective gear like helmets. ...
used for skateboarding. They are usually made of a specially designed 7-8 ply
maple ''Acer'' () is a genus of trees and shrubs commonly known as maples. The genus is placed in the family Sapindaceae.Stevens, P. F. (2001 onwards). Angiosperm Phylogeny Website. Version 9, June 2008 nd more or less continuously updated since http ...
plywood deck and
polyurethane Polyurethane (; often abbreviated PUR and PU) refers to a class of polymers composed of organic chemistry, organic units joined by carbamate (urethane) links. In contrast to other common polymers such as polyethylene and polystyrene, polyurethan ...
wheels attached to the underside by a pair of skateboarding trucks. The skateboarder moves by pushing with one foot while the other foot remains balanced on the board, or by pumping one's legs in structures such as a bowl or
half pipe A half-pipe is a structure used in gravity extreme sports such as snowboarding, skateboarding, skiing, freestyle BMX, skating, and scooter riding. Overview The structure resembles a cross-section of a swimming pool, essentially two concave ram ...
. A skateboard can also be used by simply standing on the deck while on a downward slope and allowing gravity to propel the board and rider. If the rider's leading foot is their right foot, they are said to ride "goofy". The two main types of skateboards are the longboard and the shortboard. The shape of the board is also important: the skateboard must be concaved to perform tricks.


History

Skateboarding started in
California California is a U.S. state, state in the Western United States, located along the West Coast of the United States, Pacific Coast. With nearly 39.2million residents across a total area of approximately , it is the List of states and territori ...
in the 1950s. The first skateboards were made from
roller skates Roller skates, are shoes or bindings that fit onto shoes that are worn to enable the wearer to roll along on wheels. The first roller skate was an inline skate design, effectively an ice skate with wheels replacing the blade. Later the "quad ska ...
attached to a board. Skateboarding gained in popularity because of surfing: in fact, skateboarding was initially referred to as "sidewalk surfing". The very first skateboards were handmade from wooden boxes and planks by individuals. Companies started manufacturing skateboards in 1959, as the sport became more popular. In postwar America, society was carefree with children commonly playing in the streets. Skateboarding is a very individual activity, and it continues to evolve. Since 2000, due to attention in the media and products like skateboarding video games, children's skateboards and commercialization, skateboarding has been pulled into the mainstream. As more interest and money has been invested into skateboarding, more skate parks, and better skateboards have become available. In addition, the continuing interest has motivated skateboarding companies to keep innovating and inventing new things. Skateboarding appeared for the first time in the
2020 Summer Olympics The , officially the and also known as , was an international multi-sport event held from 23 July to 8 August 2021 in Tokyo, Japan, with some preliminary events that began on 21 July. Tokyo was selected as the host city during the ...
.


Parts


Deck

"Long" boards are usually over long. Plastic "penny" boards are typically about long. Some larger penny boards over long are called "nickel" boards. The longboard, a common variant of the skateboard, is used for higher speed and rough surface boarding, and they are much more expensive. "Old school" boards (those made in the 1970s–80s or modern boards that mimic their shape) are generally wider and often have only one kicktail. Variants of the 1970s often have little or no concavity.


Wheels

The wheels allow for movement on the skateboard and helps determine the speed while riding. There are typically four wheels on a skateboard that are attached to the trucks. Ranging in size from around 48mm to around 60mm, smaller wheels are lighter in weight and are used for shorter distances and tricks. Larger wheels are heavier in weight, which are better for maintaining speed and longer distances. Wheels that are larger than 60mm are typically used for longboards.


Trucks

Longboard and skateboard trucks have the same components, but exhibit a different functionality.


Bearings

Each skateboard wheel is mounted on its axle via two
ball bearing A ball bearing is a type of rolling-element bearing that uses balls to maintain the separation between the bearing races. The purpose of a ball bearing is to reduce rotational friction and support radial and axial loads. It achieves this ...
s. With few exceptions, the bearings are the industrial standard "608" size, with a bore of depending on the axle), an outer diameter of , and a width of . These are usually made of steel, though
silicon nitride Silicon nitride is a chemical compound of the elements silicon and nitrogen. is the most thermodynamically stable and commercially important of the silicon nitrides, and the term "silicon nitride" commonly refers to this specific composition. It ...
, a high-tech ceramic, is sometimes used. Many skateboard bearings are graded according to the
ABEC scale The ABEC scale is an industry accepted standard for the tolerances of a ball bearing. It was developed by the Annular Bearing Engineering Committee (ABEC) of the American Bearing Manufacturers Association (ABMA). The ABEC scale is designed to provi ...
. The starts with ABEC1 as the lowest, followed by 3, 5, 7, and 9. It is a common misconception that the higher ABECs are better for skateboarding, as the ABEC rating only measures
tolerances Engineering tolerance is the permissible limit or limits of variation in: # a physical dimension; # a measured value or physical property of a material, manufacturing, manufactured object, system, or service; # other measured values (such as t ...
, which do not necessarily apply to skateboards. Bearing performance is determined by how well maintained the bearings are. Maintenance on bearings includes periodically cleaning and lubricating them.


Optional components


Risers/wedges

Wedges can be used to change the
turning Turning is a machining process in which a cutting tool, typically a non-rotary tool bit, describes a helix toolpath by moving more or less linearly while the workpiece rotates. Usually the term "turning" is reserved for the generation ...
characteristics of a truck.


Skateboard multi-tool

While not part of a skateboard, an all-in-one skateboard tool capable of mounting and removing trucks & wheels and adjusting truck kingpins are commonly sold by
skate shop 320px, Ridin' High Skate Shop in Burlington, Vermont A skate shop or skateshop is a store that sells skateboards and skateboarding apparel. When financially possible, skate shops sponsor local riders and promote skateboarding locally through s ...
s.


Deck rails

Deck rails are thin, plastic strips usually screwed into the bottom section of a skateboard to decrease friction while performing slide tricks and protecting the board’s graphic from damage.


See also

*
Caster board A caster board, vigorboard or waveboard is a two-wheeled, human-powered land vehicle. Other names are J-board and RipStik (sometimes written ripstick or rip stick), both of which are derived from commercial brands. A caster board has two narrow ...
*
Electric skateboard An electric skateboard is a personal transporter based on a skateboard. The speed is usually controlled by a wireless hand-held throttle remote or rider body weight-shifting between front of the board for forward motion and rear for braking. As fo ...
*
Hoverboard A hoverboard (or hover board) is a levitating board used for personal transportation, first described in science-fiction, and made famous by the appearance of a skateboard-like hoverboard in the film '' Back to the Future Part II''. Many attemp ...
*
Self-balancing scooter A self-balancing scooter (also hoverboard, self-balancing board, segway or electric scooter board) is a self-balancing personal transporter consisting of two motorized wheels connected to a pair of articulated pads on which the rider places thei ...
*
Slalomboard A slalomboard is a skateboard, usually 60–80 cm long, with great manoeuvring capability. It enables the rider to brake or propel the board without touching the ground. This is achieved by correct body weight placement, together with short ...
* Snowboard *
Surfboard A surfboard is a narrow plank used in surfing. Surfboards are relatively light, but are strong enough to support an individual standing on them while riding an ocean wave. They were invented in ancient Hawaii, where they were known as ''papa he'e ...
* Wakeboard


References

{{Authority control American inventions