A Service Access Point (SAP) is an identifying label for network endpoints used in
Open Systems Interconnection
The Open Systems Interconnection model (OSI model) is a conceptual model that 'provides a common basis for the coordination of SOstandards development for the purpose of systems interconnection'. In the OSI reference model, the communications ...
(OSI) networking.
The SAP is a conceptual location at which one OSI layer can request the services of another OSI layer. As an example, PD-SAP or PLME-SAP in
IEEE 802.15.4 can be mentioned, where the
medium access control
In IEEE 802 LAN/MAN standards, the medium access control (MAC, also called media access control) sublayer is the layer that controls the hardware responsible for interaction with the wired, optical or wireless transmission medium. The MAC sublay ...
(MAC) layer requests certain services from the
physical layer. Service access points are also used in
IEEE 802.2 IEEE 802.2 is the original name of the ISO/IEC 8802-2 standard which defines logical link control (LLC) as the upper portion of the data link layer of the OSI Model. The original standard developed by the Institute of Electrical and Electronics En ...
Logical Link Control
In the IEEE 802 reference model of computer networking, the logical link control (LLC) data communication protocol layer is the upper sublayer of the data link layer (layer 2) of the seven-layer OSI model. The LLC sublayer acts as an interface ...
in
Ethernet
Ethernet () is a family of wired computer networking technologies commonly used in local area networks (LAN), metropolitan area networks (MAN) and wide area networks (WAN). It was commercially introduced in 1980 and first standardized in 1 ...
and similar
data link layer
The data link layer, or layer 2, is the second layer of the seven-layer OSI model of computer networking. This layer is the protocol layer that transfers data between nodes on a network segment across the physical layer. The data link layer ...
protocols.
When using the OSI
Network system (
CONS
In computer programming, ( or ) is a fundamental function in most dialects of the Lisp programming language. ''constructs'' memory objects which hold two values or pointers to two values. These objects are referred to as (cons) cells, conses, ...
or
CLNS
Connectionless-mode Network Service (CLNS) or simply Connectionless Network Service is an OSI network layer datagram service that does not require a circuit to be established before data is transmitted, and routes messages to their destinati ...
), the base for constructing an address for a network element is an
NSAP address, similar in concept to an
IP address
An Internet Protocol address (IP address) is a numerical label such as that is connected to a computer network that uses the Internet Protocol for communication.. Updated by . An IP address serves two main functions: network interface ident ...
. OSI protocols as well as
Asynchronous Transfer Mode
Asynchronous Transfer Mode (ATM) is a telecommunications standard defined by American National Standards Institute (ANSI) and ITU-T (formerly CCITT) for digital transmission of multiple types of traffic. ATM was developed to meet the needs of ...
(ATM) can use Transport (TSAP), Session (SSAP) or Presentation (PSAP) Service Access Points to specify a destination address for a connection. These SAPs consist of NSAP addresses combined with optional transport, session and presentation selectors, which can differentiate at any of the three layers between multiple services at that layer provided by a network element.
{{Compu-network-stub
OSI protocols