Royal Air Force roundels

The air forces of the United Kingdom – the Royal Navy's Fleet Air Arm, the Army's Army Air Corps and the Royal Air Force use a roundel, a circular identification mark, painted on aircraft to identify them to other aircraft and ground forces. In one form or another, it has been used on British military aircraft from 1915 to the present.

Background

When the First World War started in 1914 it was the habit of ground troops to fire on all aircraft, friend or foe, so that the need for some form of identification mark became evident.Robertson 1967, p 89 At first the Union Flag was painted under the wings and on the sides of the fuselage. It soon became obvious that at a distance the St George's Cross of the Union Flag was likely to be confused with the Iron Cross that was already being used to identify German aircraft. After the use of a Union Flag inside a shield was tried it was decided to follow the lead of the French who used a tricolour cockade (a roundel of red and white with a blue centre). The British reversed the colours and it became the standard marking on Royal Flying Corps aircraft from 11 December 1914, although it was well into 1915 before the new marking was used with complete consistency.
The official order stated:

The Royal Naval Air Service specified in A.I.D. SK. No. A78 a five-foot red ring with a white centre and a thin white outline on the lower surfaces of the lower wings at mid span, from October 1914 until it was decided to standardise on the RFC roundel for all British military aircraft in June 1915.
With the same roundel being carried by RFC and RNAS aircraft, the use of the Union Jack was discontinued. The Royal Flying Corps and its successor the Royal Air Force have employed numerous versions of the roundel since then.

By 1917, a thin white outline was usually added to the roundel, to make the blue of the outer circle easier to distinguish from the dark PC.10 and PC.12 protective doping. On squadrons operating at night there was not the same need to make the marking more conspicuous, in fact it became customary to overpaint the white ring of the roundel itself – either in the camouflage finish of the aircraft as a whole, or in red. By the end of the war this had become standardised as the so-called "night roundel" of blue and red, that continued to be used on the dark NIVO green camouflage of post-war night bombers. Most RAF aircraft now had a silver finish (bare metal or aluminium doping) so that the national markings were conspicuous enough without outlining. During the late 1930s, RAF and Fleet Air Arm (FAA) aircraft were once again camouflaged, and a new outline was introduced, this time trainer yellow, and the same width as the blue and white rings.

Use by other air arms

Aside from the RAF, the Royal Navy's Royal Naval Air Service (First World War) and later the Fleet Air Arm, as well as the air elements of the British Army all adopted the same roundels.

Many nations that had been within the British Empire and Commonwealth continued to use British roundels despite having achieved independence, including Canada, Australia, New Zealand, and India until nationalism demanded unique roundels for each of those countries.

South Africa experimented with the four flag colours briefly, but then reverted to the RAF roundel but replaced the red with orange, and then the dot with a Springbok before replacing the disk with a five pointed castle.

In Canada, the Royal Canadian Air Force changed the red dot into a silver maple leaf, while the Royal Canadian Navy adopted the sugar maple leaf and both were replaced with a geometric stylized leaf.

Australia changed the red dot to a kangaroo (both standing and running were proposed before the running variant won out) and New Zealand experimented with gold, green and white ferns inset in the red dot before settling on a red kiwi.

India briefly replaced the SEAC roundel (blue on blue) with a blue and white chakra, before adopting an orange, white and green roundel.

Southern Rhodesia, the Federation of Rhodesia and Nyasaland and Rhodesia used variations on the British roundel featuring '' assegais'' before adopting a green ring with a lion and tusk on a white centre in 1970.

Roundel history

The use of letters (A, B, C, D) to denote different versions of roundels does not come from official documents, but rather from attempts by historians in the 1950s to catalogue the various roundels being used. Official documents instead provided dimensions in inches. Since most sources now use this nomenclature it has been included here.

Roundel sizes

Pre-war

Up until mid-1938, roundel sizes tended to vary widely, depending on the type of aircraft; the exception to the use of type A roundels for all aircraft was seen on the overall NIVO (dark green) painted night bombers (e.g., Handley Page Heyfords) which used type B roundels. Roundels used on aircraft painted in NIVO were duller than the normal colours. The size of the roundel was generally determined by the space available at the specified location, with a space of several inches around the edges. Some aircraft – primarily seaplanes, had a white outline around the fuselage roundel, even on silver doped finishes however this application was inconsistent so was probably not official. From 1929, the RAF switched to a new system of colour specifications, discarding the one used since the First World War, and as a result, the colour used for insignia changed, however the changeover period appears to have extended until at least 1932 for new production, and the old colours were not overpainted, but only gradually phased out as aircraft needed to be repainted.

During the Munich crisis of mid- to late 1938, most RAF aircraft adopted green and dark earth camouflage with type B roundels of reduced sizes on all upper surfaces and the fuselage sides; though based on colour photos, these remained in the bright pre-war colours. FAA aircraft largely remained silver doped overall with type A roundels predominating. To illustrate the progression up to the end of the war the Spitfire will be used as a typical single seat-single engine fighter:
*1938 – November 1939: The first production batches of Spitfires ( K9787-K9814) were built with roundels on the fuselage sides-these were centred aft of the rear edge of the cockpit door. type A1s were on the upper wings. From K9815, the fuselage roundels were moved back, to be centred aft of the cockpit door and above the main longeron, and reduced in diameter to type A1. This position for the fuselage roundel was subsequently standard on all Supermarine and Westland built Spitfires and Seafires. The first 180 or so built (K9787–K9960) also had factory applied type A roundels under the wings. After K9960, there were ''no factory applied'' under-wing roundels until December 1940. With the change to type B roundels Spitfires built with type A1 roundels had were repainted by the squadrons creating a plethora of sizes and proportions.
*Between K9961 and N3032, the factory paint scheme required type B roundels on the fuselage sides and a roundel with a red centre on the upper wings. From N3033–P9374, it was intended that type B fuselage roundels would be used, although few Spitfires saw service with roundels of this size.Hooton, 1982.

Most RAF aircraft went through similar transitions, as a result of which there was little conformity, depending on when the aircraft was built and how squadrons over painted or repainted the roundels.

Second World War

By the beginning of the Second World War on 3 September 1939, RAF roundel sizes started to show more conformity. On 30 October, all commands were ordered to change upper wing surface Type B roundels to Type A. Further instructions ordered all but fighters and night bombers to have Type A under the wing tips. This was clarified in November to the effect that only reconnaissance maritime aircraft (e.g., Short Sunderland flying boats) would have the Type A on the upper wings but all aircraft would use the Type B on the sides.

A decision was made to make roundels more conspicuous and, in May 1940, the yellow outer ring was ordered to be added back to fuselage sides (along with red, white, and blue stripes on the fin). Where possible, the yellow should be the same width as the blue, but on Spitfires with their narrower fuselages a thinner ring was acceptable. Also in May, an order was made to put red, white, and blue roundels on the underwings of all fighters, with an addendum that where the roundel was on a black background it should be outlined in yellow. In June, orders were given for the half black/half-white underwing scheme to be replaced by "sky" Underwing roundels were dispensed with until August when they were ordered back.

Because of the pressures of front-line service there were always exceptions to the standards set by the RAF and that deadlines were not necessarily met. Although type C and C1 roundels were meant to be in use by July 1942 some Spitfires displayed type A and A1 roundels as late as October:
*Late November/early December 1939 to June 1940: All Spitfire units were instructed to replace the type B fuselage roundels with type A roundels. This led to fuselage roundels which varied in size from to . Upper wings had been set at Type B with red centres until January 1945; Fuselage sides: type A; no fin flash; no underwing roundels.
*June 1940 to December 1940: Spitfires with the type A fuselage roundels had a yellow outer ring added, making them Type A1. All Spitfires built from June had standardised fuselage roundels, although many had non-standard red centres applied at the Supermarine factory, instead of the specified . All Castle Bromwich built Spitfires had roundels with the correct centre spot; in addition all Castle Bromwich built Spitfires had the roundels centred aft of the cockpit door and above the main longeron. As many Spitfires as possible had type A roundels painted under the wings, along with a pale green/blue camouflage colour. The under wing roundels varied widely in size and location depending on which Maintenance Unit (MU) prepared the aircraft before delivery to the squadrons. The Spitfire 1a of 19 Squadron shown in photo 5 has Type A under the wingtips, indicating it may have been processed by 6 MU. Fin flashes were painted on starting in late May 1940. These varied in size although they were mostly wide, divided in three red, white, and blue strips, and covered the full height of the tail fin.
* December 1940 to July 1942: type A1 fuselage roundels, type A on lower wings. Fin flash standardised at high and wide, equally divided into three stripes.
*July 1942 to January 1945: type C1 fuselage roundels. type C lower wing roundels. Fin flash square with stripe widths of , and .Bowyer, 1970.
*January 1945 to June 1947: On all 2 TAF aircraft Type B upper wing roundels were either converted to type C1 roundels or over-painted and type C1 roundels painted on. Under wing roundels were converted to type C1. The proportions of the rings and centre spot could vary depending on the skill of the painters carrying out the conversion.

Although the Spitfire is used as one example, because it was one of the few British aircraft to see front-line service before, during and after the Second World War, other aircraft types went through similar transitions. During the transition from A type to C type roundels some Hawker Typhoons displayed type C1 roundels which were modified from type A1s.
After June 1940 the official sizes for roundels were:

Many variations could be seen because of the problems involved in interpreting instructions or repainting aircraft in front-line service, but most production aircraft conformed to these basic dimensions.

SEAC and RAAF

In the China/Burma/India (CBI) theatre and Pacific it was thought that the red centres of RAF roundels could be confused with the red '' hinomaru'' carried by Japanese aircraft. After an RAAF No. 11 Squadron Catalina was mistaken for a Japanese aircraft by a US Navy Wildcat in the Pacific Theatre and attacked, the roundels on RAAF were modified, mostly in the field, by painting over the red with white. Often the yellow outer rings of type A1 roundels were left intact. No British or American built aircraft had factory painted SEAC style roundels; all aircraft had to be repainted, and, in many cases re-camouflaged by Maintenance Units behind the lines or by front line squadrons.

When Spitfire Mk VCs reached the CBI Theatre in November 1943 their type B, C and C1 roundels were all modified by painting out the red centre spots in white, the red of the fin flash was similarly painted over. When the Mk VIIIs arrived in early 1944 most of them had their roundels overpainted completely and replaced by diameter SEAC roundels with light blue centre spots (a mix of dull roundel blue and white) of approximately diameter. The fin flashes were replaced by high by wide versions, each light blue (leading edge) and roundel blue stripe being wide.

Mk VC Spitfires used by the Royal Australian Air Force over Northern Australia in October 1943 had their 36-inch type C1 fuselage roundels modified to SEAC roundels by painting out the yellow outer ring in the camouflage colours and over-painting the red centre in white. The lower wing type C roundels and upper wing type Bs were also modified by over-painting the red centres in white. The red fin stripe was also painted out with white and, in many cases the blue was extended forward making equal widths of . RAAF Mk VIIIs had their roundels and fin flashes modified in the same ways, although some had their upper wing roundels overpainted and replaced with SEAC roundels.

Fin flash

All current Royal Air Force aircraft carry a flash on the fin. This is either red/white/blue, or red/blue, the latter normally being used on camouflaged aircraft, with the red stripe forward. Aircraft painted anti-flash white in the nuclear strike role had a pale pink and blue flash, the same shades as the roundels, to reflect some of the thermal radiation from a nuclear explosion.

The Royal Navy and Army do not use the fin flash but have the words ''ROYAL NAVY'' or ''ARMY'' on the rear fuselage or fin instead. An exception to this was the Harrier GR7s and GR9s of the Naval Strike Wing, which carried similar markings to RAF Harriers. The fin flash can be rectangular, slanted or tapered, depending on aircraft type.

In a situation similar to that of the roundels, the fin flash was also shared with the air forces of Australia and New Zealand.

The fin flash evolved from the rudder stripes painted on the rudders of early RFC and RAF aircraft during the First World War, the markings comprising blue, white and red vertical stripes doped on the rudder. However, with the performance of aircraft increasing considerably during the 1930s, the practice of applying painted markings onto the (then manually powered) control surfaces was discontinued because of the need to rebalance the controls – failure to do this could have adverse effects on the surface's aerodynamic balance, possibly leading to flutter of the control surface at high airspeeds. It was for this same reason that the positioning of the wing roundels was revised so that they no longer overlapped the ailerons.

In an attempt to conform to the appearance of French military aircraft, rudder stripes reappeared on aircraft (mainly Fairey Battles and Hawker Hurricanes) of the RAF based in France, starting in early September 1939. These stripes were painted in standard RAF colours in the order blue, white, red.

Fin flashes were officially adopted in June 1940. For the first six months there was no conformity in the width or height of the stripes and they were painted to cover as much of the fin area as possible. With occasional exceptions the order was red (leading edge), white, blue. In December 1940 type A fin flashes were standardised with a height of , and an overall width of , divided into three red, white and blue stripes (e.g.: photo six, the Sea Hurricanes show this standardised fin flash). On some aircraft, e.g.; photo reconnaissance Spitfires the fin flash was about half these dimensions.

In July 1942, with the adoption of the type C and C1 roundels the fin flash became a square for RAF fighters, the stripe widths becoming red, white and blue. There were some exceptions; RAF North American Mustangs all used fin flashes which were high by wide. In early 1944 some aircraft types were painted in a "High-altitude" camouflage scheme and adopted type B roundels and fin flashes.

The then-current RAF fin flashes were also adopted for USAAF aircraft operating alongside British and Commonwealth forces in the Mediterranean theatre in 1942, appearing on US Curtiss P-40 Warhawk fighters and North American B-25 Mitchell bombers, as well as on USAAF Consolidated B-24 Liberators flying from North Africa on attacks such as 1943's Operation Tidal Wave.

Colours

Roundel and fin-flash colours changed several times during the First World War because of severe problems with fading. The third standard (VB3 and VR3) would be used until the early 1930s when much brighter colours replaced the red and blue at the same time that rudder stripes were omitted. The red and blue were both duller and less saturated than later versions and varied considerably as paint was usually mixed locally. The actual switchover began in 1929 but new aircraft were still being delivered in 1932 with the earlier colours.

For the period from the early 1930s until 1938, Roundel Red was close to FS 595 21136 and the Roundel Blue was slightly lighter and brighter than FS 595 15056. Trainer Yellow was close to FS 595 23538.
Photo 2, a restored Bristol F.2 Fighter is a fairly good representation of the late interwar colours. On fabric covered aircraft these were glossy (as was the general finish) until dulled with age, even during the First World War.

In 1938, with the threat of war looming, new markings colours were introduced along with camouflage. The blue was darker, becoming similar to FS 595 25050 while the red became a slightly brownish brick-red, about FS 595 20109. The trainer yellow stayed the same shade but all colours were now matte. These colours remained standard for another eight years.Note: Colours are very hard to interpret; changes in lighting conditions, filters and, different film types, paint batches and fading can make large differences in the way colours appear. Using the FS 595 system to interpret British Standard colours can be considered only as a rough guide as none are exact matches and only represent the closest colour found on the FS chart. To further complicate matters, old stocks continued to be used up. A series of colour photos of a Miles Master show wing and fuselage roundels (C and C1) in dull colours, while the fin flash remains in the bright pre-war colours, albeit with the later proportions. Other colour photos show a mixture of bright and dull colours being used on the same insignia, though all instances found have been of trainers.

Post-war colours were specified by the new BS 381 colour standard and approximate the late pre-war colours except for special cases, such as anti-flash markings and the current low visibility markings. The old blue colour, Aircraft Blue on BS381c was BS108. A new colour BS110, Roundel blue, made on Phthlalocyanine blue, was introduced in the early 1960s to improve weather fastness.

Gallery

Image:Sketch of a Short seaplane on the water RMG PW1792 (cropped).jpg, Short 184, 1917. Contemporary watercolour showing late First World War roundels, similar to later type A with white outer ring for contrast against PC.12 camouflage.
Image:Vickers Virginia in flight.jpg, Vickers Virginia night bomber, 1922, Type B roundels in 6 locations.
Image:Hawker Fury Mk.I K2900 No. 1 Squadron RAF.jpg, Hawker Fury, 1935. Type A roundels, still overlapping the ailerons. Rudder stripes have red forward.
Image:Armstrong Whitworth Whitley MkI in flight c1938.jpg, Armstrong Whitworth Whitley, 1938, Type A1 roundels on upper wings and fuselage side only and no fin flashes or rudder stripes.
Image:Spitfire VB 222 Sqn RAF in flight 1942.jpg, Supermarine Spitfire, May 1942. A1 fuselage roundel, B type wing roundels and full height fin flash.
Image:DH98 Mosquito bomber (cropped).jpg, de Havilland Mosquito, 1944. Type B roundels upper wings, type C1 on fuselage sides and type C fin flash used on aircraft from June 1942 – 1947.
Image:BAE Hawk T1 (Red Arrows) in Russia.jpg, Red Arrows BAe Hawk, 2012, with type D roundels and non-standard fin markings.
Image:BAC TSR-2 - Mike Freer.jpg, BAC TSR-2 in overall Anti-flash white showing Type D Pale roundels.
Image:AvroVulcanGooseBay.JPG, Avro Vulcan, 1988. Large low visibility roundels, upper wings and fuselage with matching fin flash.
Image:Harrier.kemble.750pix.jpg, BAe Harrier II with small low visibility roundels and fin flash.
Image:Hawker Siddeley Nimrod MR2 (801), UK - Air Force AN1445793.jpg, Hawker Siddeley Nimrod with salmon pink and pale blue low visibility roundels.
Image:British F-35B in flight near Eglin AFB in May 2014.jpg, Lockheed Martin Lightning II showing light grey/dark grey roundels and fin flash

See also

* List of RAF Squadron Codes
* United Kingdom military aircraft serials
* United Kingdom aircraft test serials
* British military aircraft designation systems
* Military aircraft insignia

References

Citations

The RAAF roundels were not SEAC type as the RAAF did not come under RAF command in the Pacific Theatre.

Bibliography

* Bowyer, Michael J F. ''Fighting Colours; RAF fighter camouflage and markings, 1937–1969.''. London: Patrick Stephens Ltd., 1970.
* Bowyer, Michael J F. ''Bombing Colours; Royal Air Force Bombers, their Markings and Operations, 1937–73''. London: Patrick Stephens Ltd., 1973.
* Hooton, Ted. "Spitfire Camouflage 1938–1940: Article and Scale Drawings." ''Scale Aircraft Modelling,'' Vol 5 No 2 November 1982. Berkhampstead, Herts UK.
* Robertson, Bruce. ''Aircraft Camouflage and Markings 1907–1954; 3rd edition''. London: Harleyford, 1959.
* Robertson, Bruce. ''Aircraft Markings of the World 1912–1967''. London: Harleyford, 1967.

External links

The Royal Air Force Roundel

{{DEFAULTSORT:Royal Air Force Roundels
Military symbols
British military insignia
Royal Air Force
Aircraft markings