Ring cent
   HOME

TheInfoList



OR:

The ring cent or holey cent was a one-cent
pattern coin A pattern coin is a coin which has not been approved for release, but produced to evaluate a proposed coin design. They are often off-metal strike (using metals of lower value to test out the dies), to proof standard or piedforts. Many coin col ...
first struck in various compositions and designs between 1850 and 1851 as part of an experiment on producing a cent with a reduced weight and diameter, as the rising price of copper had caused cents to cost more than their face value to produce. Many varieties exist, with differing designs as well as differing compositions, including billon (standard),
aluminum Aluminium (aluminum in American and Canadian English) is a chemical element with the symbol Al and atomic number 13. Aluminium has a density lower than those of other common metals, at approximately one third that of steel. It ha ...
,
copper Copper is a chemical element with the symbol Cu (from la, cuprum) and atomic number 29. It is a soft, malleable, and ductile metal with very high thermal and electrical conductivity. A freshly exposed surface of pure copper has a pink ...
,
cupronickel Cupronickel or copper-nickel (CuNi) is an alloy of copper that contains nickel and strengthening elements, such as iron and manganese. The copper content typically varies from 60 to 90 percent. ( Monel is a nickel-copper alloy that contains a mi ...
,
nickel silver Nickel silver, Maillechort, German silver, Argentan, new silver, nickel brass, albata, alpacca, is a copper alloy with nickel and often zinc. The usual formulation is 60% copper, 20% nickel and 20% zinc. Nickel silver does not contain the eleme ...
,
nickel Nickel is a chemical element with symbol Ni and atomic number 28. It is a silvery-white lustrous metal with a slight golden tinge. Nickel is a hard and ductile transition metal. Pure nickel is chemically reactive but large pieces are slow t ...
,
silver Silver is a chemical element with the symbol Ag (from the Latin ', derived from the Proto-Indo-European ''h₂erǵ'': "shiny" or "white") and atomic number 47. A soft, white, lustrous transition metal, it exhibits the highest electrical ...
, and
white metal The white metals are a series of often decorative bright metal alloys used as a base for plated silverware, ornaments or novelties, as well as any of several lead-based or tin-based alloys used for things like bearings, jewellery, miniature f ...
.


History

In the late-1840s, the price of copper had risen to the point that
large cent The United States large cent was a coin with a face value of 1/100 of a United States dollar. Its nominal diameter was 1 inch (28.57 mm). The first official mintage of the large cent was in 1793, and its production continued until 1857, whe ...
s cost more than one cent to produce. In response to a bill drafted in 1849 by Congressman Sam F. Vinton to reduce the size of the cent, the US mint began looking for an alternative type of cent. One solution to the problem was to
perforate A perforation is a small hole in a thin material or web. There is usually more than one perforation in an organized fashion, where all of the holes collectively are called a ''perforation''. The process of creating perforations is called perfor ...
the coin in the center, creating a ring-like appearance. Pattern ring cents were first struck in 1850 in various test compositions. However, it was found that the coin was difficult to eject from the presses and that it was expensive to recover the silver from the alloy. Because of this, the ring cent was not placed into mass-production and the large cent continued to be produced until 1857, when it was replaced by the
Flying Eagle cent The Flying Eagle cent is a one-cent piece struck by the Mint of the United States as a pattern coin in 1856 and for circulation in 1857 and 1858. The coin was designed by Mint Chief Engraver James B. Longacre, with the eagle in flight based o ...
. According to numismatic historian
Walter Breen Walter Henry Breen Jr. (September 5, 1928 – April 27, 1993) was an American numismatist, writer, and convicted child sex offender; as well as the husband of author Marion Zimmer Bradley. He was known among coin collectors for writing ''Wa ...
, another factor in the rejection of the ring cent was that it reminded many of the Chinese cash coin, which had minimal purchasing value. The ring cent was briefly revived in 1884 by Eastman Johnson, although this time the design was somewhat cruder as the holes appeared to have been handcut as they vary in both size and shape. Although a more refined and smoother design was struck the following year, no more ring cents would ever be struck. 196 ring cents (originals and restrikes) are known to exist.


Other versions

Patterns of this "ring cent" were struck in various metals and with various hole sizes. There were also various different designs, with some designs lacking a date or a reverse design. Some did not even have a hole, in its place being a circle resembling a line for perforation. These were known as annular cents.


Ring cent obverse designs

File:1850 1C Cent, Judd-124G, Pollock-145, High R.7.jpg, 1850 non-perforated obverse File:1850 P1C One Cent, Judd-119 Original, Pollock-134, Low R.6.jpg, 1850 perforated obverse File:1851 P1C One Cent, Judd-131A Restrike, Pollock-156, High R.7.jpg, 1851 non-perforated obverse File:1851 P1C One Cent, Judd-127 Original, Pollock-149, Low R.6 rev.jpg, 1851 perforated obverse File:1884 1C One Cent, Judd-1721, Pollock-1929, R.5.jpg, Obverse of the 1884 Eastman Johnson cent File:1885 1C One Cent, Judd-1740, Pollock-1950, High R.6.jpg, Obverse of the 1885 ring cent. All 1885 ring cents (with and without the hole) were struck with a die featuring a 5 over 3 overdate error.


Ring cent reverse designs

File:1850 1C Cent, Judd-124G, Pollock-145, High R.7 rev.jpg, 1850 blank non-perforated reverse (1853 restrikes only) File:1850 P1C One Cent, Judd-124 Restrike, Pollock-139, Low R.7 rev.jpg, 1850 non-perforated reverse File:1850 P1C One Cent, Judd-119 Original, Pollock-134, Low R.6 rev.jpg, 1850 perforated reverse File:1851 P1C One Cent, Judd-131A Restrike, Pollock-156, High R.7 rev.jpg, 1851 non-perforated reverse File:1851 P1C One Cent, Judd-127 Original, Pollock-149, Low R.6.jpg, 1851 perforated reverse File:1853 E1C One Cent, Judd-152, Pollock-140, R.7.jpg, 1850 non-perforated reverse, with the denomination surrounded by a wreath File:1884 1C One Cent, Judd-1721, Pollock-1929, R.5 rev.jpg, Reverse of the 1884 Eastman Johnson cent File:1885 1C One Cent, Judd-1740, Pollock-1950, High R.6 rev.jpg, Reverse of the 1885 ring cent. The 1850 blank non-perforated reverse was probably struck from the same die that was used for an 1852 gold dollar pattern. In the case of the 1850 non-perforated reverse with the denomination surrounded by a wreath, although they were dated 1850 (and thus used the 1850 non-perforated reverse), the coins were actually struck in 1853.


See also

*
Flying Eagle cent The Flying Eagle cent is a one-cent piece struck by the Mint of the United States as a pattern coin in 1856 and for circulation in 1857 and 1858. The coin was designed by Mint Chief Engraver James B. Longacre, with the eagle in flight based o ...
*
Silver center cent The Silver center cent is an American pattern coin produced by the United States Mint in 1792. As a precursor to the large cent it was one of the first coins of the United States and an early example of a bimetallic coin. Only 12 original examples ...
*
Two-cent billon The two-cent billon was a pattern US coin struck in 1836 and initially proposed as part of the Act of January 13, 1837. Versions exist with either a reeded edge and coin orientation or a plain edge and medal orientation; however, those with the ...
*
Three-cent bronze The three-cent bronze was a pattern coin struck in 1863 by George Eckfeldt. The coin shares its obverse design (other than the font of the date, which is smaller and curved), thickness, and diameter with that of the Braided Hair large cent, but w ...
*
Stella (United States coin) The United States four dollar coin, also officially called a Stella, is a unit of currency equivalent to four United States dollars. It was originally minted as a universal coin exchangeable with any currency around the world. Two varieties of ...
*
1943 steel cent 1943 steel cents are U.S. one-cent coins that were struck in steel due to wartime shortages of copper. The Philadelphia, Denver, and San Francisco mints each produced these 1943 Lincoln cents. The unique composition of the coin ( low-grade ste ...
*
1974 aluminum cent The 1974 aluminum cent was a one-cent coin proposed by the United States Mint in 1973. It was composed of an alloy of aluminum and trace metals, and it was intended to replace the predominantly copper–zinc cent due to the rising costs of coi ...
*
Holed coin Although the vast majority of coins are round, coins are made in a variety of other shapes, including squares, diamonds, hexagons, heptagons, octagons, decagons, and dodecagons. They have also been struck with scalloped (wavy) edges, and with hole ...
*
Ring nickel The ring nickel (separate varieties known as J-1724, J-1725, and J-1742) was a United States pattern coin with a face value of five cents. It was struck in 1884 and 1885, even though the Liberty Head nickel had just been released in 1883. The ...


References


Bibliography

* {{Coinage (United States) 1850 introductions One-cent coins of the United States Coins of the United States