Parrel beads (also spelled parral or parrell) are an element of

sailing Sailing employs the wind—acting on sails, wingsails or kites—to propel a craft on the surface of the ''water'' (sailing ship, sailboat, raft, windsurfer, or kitesurfer), on ''ice'' (iceboat) or on ''land'' (land yacht) over a chosen cou ...

rigging. They act as roller bearings on a parrel, which is a rope or wire strop that typically fastens one spar to another along which it must have some freedom of movement. An example of this is at the jaws of a

gaff Gaff may refer to: Ankle-worn devices * Spurs in variations of cockfighting * Climbing spikes used to ascend wood poles, such as utility poles Arts and entertainment * A character in the ''Blade Runner'' film franchise * Penny gaff, a 19th- ...

on a

gaff rig Gaff rig is a sailing rig (configuration of sails, mast and stays) in which the sail is four-cornered, fore-and-aft rigged, controlled at its peak and, usually, its entire head by a spar (pole) called the ''gaff''. Because of the size and shap ...

ged or gunter rigged craft. This allows the gaff to slide up and down the mast as sail is hoisted or lowered, and allows some rotation around the mast as the sail is sheeted in and out to allow for different wind directions. Another example is on the tack of a spinnaker rigged over a furled

jib A jib is a triangular sail that sets ahead of the foremast of a sailing vessel. Its tack is fixed to the bowsprit, to the bows, or to the deck between the bowsprit and the foremost mast. Jibs and spinnakers are the two main types of headsail ...

Construction

A set of parrel beads is formed from small balls, size depending on the application, threaded on a piece of small line and secured with a

stopper knot Stopper may refer to: * Bung, a plug used to stop the opening of a container ** Laboratory rubber stopper, a specific type of bung * Plug (sanitation), used to stop a drainage outlet * Defender (association football), in soccer (association foo ...

at each end.

Use

One end of the line is usually permanently bent to the movable item. When in use the movable item is positioned where it is required, and the free end of the parrel bead line is passed around the static item and secured back to the movable item. Their function is to secure the movable item in place, but to allow it to move along and around the device.

References

{{Sail Types Sailing rigs and rigging