Mordançage
   HOME

TheInfoList



OR:

Mordançage is an alternative photographic process that alters silver gelatin prints to give them a degraded effect. The mordançage solution works in two ways: it chemically bleaches the print so that it can be redeveloped, and it lifts the black areas of the emulsion away from the paper giving the appearance of veils. Once the emulsion is lifted, it can then be removed or manipulated depending on the desired outcome. Areas where the emulsion was removed appear to be in relief. These prints can become oxidized during their creation, further altering the tonality of the image.


History

Mordançage was created by
Jean-Pierre Sudre Jean-Pierre Sudre (; September 27, 1921 – September 6, 1997) was a commercial photographer. Biography Sudre was born in Paris but later moved to the south of France. There he devoted his life to workshops of fine art photography. Photography ...
during the 1960s. While he is credited with the creation of Mordançage, it is based on a late 19th-century process known as etch-bleach. This process has also been referred to as bleach-etch, gelatin relief, or reverse relief. Etch-bleach was first documented in 1897 by Paul Liesegang and was originally used as a reversal process for
film negatives In photography, a negative is an image, usually on a strip or sheet of transparent plastic film, in which the lightest areas of the photographed subject appear darkest and the darkest areas appear lightest. This reversed order occurs because t ...
. Within a year, a man named Andresen suggested using hydrogen peroxide and
hydrochloric acid Hydrochloric acid, also known as muriatic acid, is an aqueous solution of hydrogen chloride. It is a colorless solution with a distinctive pungent smell. It is classified as a strong acid Acid strength is the tendency of an acid, symbol ...
in the process in the place of
ammonium persulfate Ammonium persulfate (APS) is the inorganic compound with the formula (NH4)2S2O8. It is a colourless (white) salt that is highly soluble in water, much more so than the related potassium salt. It is a strong oxidizing agent that is used as a catalys ...
. Later references to the etch-bleach process show a chemical composition that is very close to that of mordançage - the only difference being the use of
citric acid Citric acid is an organic compound with the chemical formula HOC(CO2H)(CH2CO2H)2. It is a colorless weak organic acid. It occurs naturally in citrus fruits. In biochemistry, it is an intermediate in the citric acid cycle, which occurs in ...
in place of glacial acetic acid. Sudre refined this technique and dubbed it "mordançage." His process has since been adopted by some of his students, and has spread from there. Sudre's American student, Elizabeth Opalenik, created what is now known as the "draping effect" in the Mordançage process.


Chemistry

The mordançage solution consists of the following materials. * 10 g
copper(II) chloride Copper(II) chloride is the chemical compound with the chemical formula CuCl2. The anhydrous form is yellowish brown but slowly absorbs moisture to form a blue-green dihydrate. Both the anhydrous and the dihydrate forms occur naturally as the ver ...
* 50 mL
glacial acetic acid Acetic acid , systematically named ethanoic acid , is an acidic, colourless liquid and organic compound with the chemical formula (also written as , , or ). Vinegar is at least 4% acetic acid by volume, making acetic acid the main component ...
* 25 mL 30%-35%
hydrogen peroxide Hydrogen peroxide is a chemical compound with the formula . In its pure form, it is a very pale blue liquid that is slightly more viscous than water. It is used as an oxidizer, bleaching agent, and antiseptic, usually as a dilute solution (3%â ...
*
distilled water Distilled water is water that has been boiled into vapor and condensed back into liquid in a separate container. Impurities in the original water that do not boil below or near the boiling point of water remain in the original container. Thus, di ...
to make 1 liter


Process

The mordançage process can be used to treat either fiber-based or resin-coated paper. After making a silver gelatin print, the photograph is placed in the mordançage solution, and left in until the image has bleached. The hydrogen peroxide in the solution softens the gelatin in the emulsion. Next, the chemicals are rinsed off of the print. Some people choose to remove the parts of the emulsion that have started to disintegrate while washing; these areas will be the darkest portions of the print. After cleaning, the print is redeveloped. A variety of fresh or exhausted developers can be used at various dilutions, as well as some toners. Different developers and dilutions will result in different tonalities in the paper. Areas where the emulsion has been degraded may redevelop unevenly. Emulsion removal can cause a reversal effect when redeveloped. Once the image has been redeveloped, it is rinsed off again. The print can be fixed in fixer at this point. Neglecting to fix the image can lead to the oxidation of the print, however these color shifts can be a desirable effect. A final washing of the print is performed after fixing. Any veils that have developed are fragile, which makes the print difficult to wash without causing them to pull away from the paper. Because of this difficulty, mordançage prints will often remain imbued with chemicals. The chemical saturation of the paper can lead to these prints contaminating work areas and other photographs. While the process often follows this progression, it can be altered. Development of the print can be halted at any point in the process through the use of
stop bath Stop bath is a acidic solution used for processing black-and-white photographic films, plates, and paper. It is used to neutralize the alkaline developer, thus halting development. Stop bath is commonly a 2% dilution of acetic acid in water, tho ...
. Alternatively, sometimes prints will be bleached and redeveloped multiple times until the artist is happy with the results.


Preservation

Photographs that have not been properly fixed and washed can shift color over time through oxidation and acid migration. As with any photographic print, mordançage prints are degraded by exposure to light, humidity, and high temperatures. The mordançage solution is acidic, so these prints can contaminate other materials. Photographs can be interleaved with alkaline buffered paper, or sleeved in polyethylene to help prevent acid migration.


References


External links


Unique Traditional Processes: Mordançage

The Mordançage Process

The Mordançage Background and Process


{{DEFAULTSORT:Mordancage Photographic processes dating from the 19th century Alternative photographic processes