Medical Device Regulation Act
   HOME

TheInfoList



OR:

The Medical Device Regulation Act or Medical Device Amendments of 1976 was introduced by the 94th Congress of the United States. Congressman Paul G. Rogers and Senator Edward M. Kennedy were the chairperson sponsors of the medical device amendments. The Title 21 amendments were signed into law on May 28, 1976, by the 38th President of the United States
Gerald R. Ford Gerald Rudolph Ford Jr. ( ; born Leslie Lynch King Jr.; July 14, 1913December 26, 2006) was an American politician who served as the 38th president of the United States from 1974 to 1977. He was the only president never to have been elected ...
. The U.S. legislation enacted in 1976 amended the
Food, Drug, and Cosmetic Act The United States Federal Food, Drug, and Cosmetic Act (abbreviated as FFDCA, FDCA, or FD&C) is a set of laws passed by the United States Congress in 1938 giving authority to the U.S. Food and Drug Administration (FDA) to oversee the safety of f ...
of 1938 signed by the 32nd President of the United States
Franklin D. Roosevelt Franklin Delano Roosevelt (; ; January 30, 1882April 12, 1945), often referred to by his initials FDR, was an American politician and attorney who served as the 32nd president of the United States from 1933 until his death in 1945. As the ...
.


History

During the 1960s, the
Secretary of Health, Education, and Welfare The United States secretary of health and human services is the head of the United States Department of Health and Human Services, and serves as the principal advisor to the president of the United States on all health matters. The secretary is ...
(HEW) commissioned the Cooper Committee to study the adverse effects of medical devices for human use. In 1970, the study committee recommended a classification for medical devices based on comparative risk. In 1976, the Dalkon Shield intrauterine device injured at least 900,000 women in the United States, which aided the emphasis for regulatory oversight and therapeutic requirements provided by the U.S. legislation P.L. 94-295.


Provisions of the Act

Classification of Medical Devices
There are three classifications for medical devices: :* ''Class I - General Controls'' for devices considered as low risks for human use. ::Medical device has sufficient information to provide reasonable assurance of the safety and effectiveness of the device. Medical device is not to be for a use in supporting or sustaining human life, for a use which is of substantial importance in preventing impairment of human health, and does not present a potential unreasonable risk of illness or injury. :* ''Class II - Performance Standards'' for devices considered as moderate risks for human use. ::Medical device has insufficient information to provide reasonable assurance of the safety and effectiveness of the device. Medical device cannot be classified as a class I device because the controls authorized are insufficient to provide reasonable assurance of the safety and effectiveness of the device. Medical device has sufficient information to establish a performance standard and it is necessary to establish a performance standard for the device. :* ''Class III - Premarket Approval'' for devices considered as high risks for human use. ::Medical device cannot be classified as a class I device because insufficient information exists to determine that the controls authorized are sufficient to provide reasonable assurance of the safety and effectiveness of the device. Medical device cannot be classified as a class II device because insufficient information exists for the establishment of a performance standard to provide reasonable assurance of its safety and effectiveness of the device. Medical device is to be for use in supporting or sustaining human life, of substantial importance in preventing impairment of human health, or presents a potential unreasonable risk of illness or injury, is to be subject, premarket approval to provide reasonable assurance of its safety and effectiveness. Classification Panels for Medical Devices
:* Classification panels are to determine which devices intended for human use should be subject to the requirements of ''class I - general controls'', ''class II - performance standards'', or ''class III - premarket approval''. :* Classification panels are to provide notice to the manufacturers and importers of medical devices intended for human use. :* Manufacturers and importers are to prepare for the application of such requirements and to report medical devices intended for human use manufactured or imported by them. :* Panel appointments shall consist of members with adequately diversified expertise in such fields as biological and physical sciences, clinical and administrative medicine, engineering, and other related professions. Persons who are qualified by training and experience to evaluate the safety and effectiveness of medical devices or possess skills in the use of, experience in the development, manufacture, or utilization of such medical devices. :* No individual who is in the regular full-time employment of the United States and engaged in the administration of this Act may be a member of any medical device classification panel.


References


External links

* * * {{cite web , url=https://www.fda.gov/MedicalDevices/DeviceRegulationandGuidance/Overview/ , title=FDA Overview of Medical Device Regulation , date=4 September 2020 , publisher=U.S. Food and Drug Administration 94th United States Congress United States federal health legislation Health care quality 1976 in law 1976 in the United States Food and Drug Administration Regulation of medical devices