Luminous exitance

In photometry, illuminance is the total luminous flux incident on a surface, per unit area. It is a measure of how much the incident light illuminates the surface, wavelength-weighted by the luminosity function to correlate with human brightness perception.International Electrotechnical Commission (IEC): ''International Electrotechnical Vocabulary.'
ref. 845-21-060, illuminance
/ref> Similarly, luminous emittance is the luminous flux per unit area emitted from a surface. Luminous emittance is also known as luminous exitance.

In SI units illuminance is measured in lux (lx), or equivalently in lumens per square metre ( lm· m⁻²). Luminous exitance is measured in lm·m⁻² only, not lux.
International Electrotechnical Commission (IEC): ''International Electrotechnical Vocabulary.'
ref. 845-21-081, luminous exitance
/ref> In the CGS system, the unit of illuminance is the phot, which is equal to . The foot-candle is a non-metric unit of illuminance that is used in photography.

Illuminance was formerly often called brightness, but this leads to confusion with other uses of the word, such as to mean luminance. "Brightness" should never be used for quantitative description, but only for nonquantitative references to physiological sensations and perceptions of light.

The human eye is capable of seeing somewhat more than a 2 trillion-fold range. The presence of white objects is somewhat discernible under starlight, at , while at the bright end, it is possible to read large text at 10⁸ lux, or about 1000 times that of direct sunlight, although this can be very uncomfortable and cause long-lasting afterimages.

Common illuminance levels

Astronomy

In astronomy, the illuminance stars cast on the Earth's atmosphere is used as a measure of their brightness. The usual units are apparent magnitudes in the visible band. V-magnitudes can be converted to lux using the formula
:$E_\mathrm = 10^$,
where ''E''_v is the illuminance in lux, and ''m''_v is the apparent magnitude. The reverse conversion is
:$m_\mathrm = -14.18-2.5 \log(E_\mathrm)$.

Relation to luminance

The luminance of a reflecting surface is related to the illuminance it receives:
$\int_ L_\mathrm \mathrm\Omega_\Sigma \cos \theta_\Sigma = M_\mathrm = E_\mathrm R$
where the integral covers all the directions of emission , and
* _v is the surface's luminous exitance
* _v is the received illuminance, and
* is the reflectance.

In the case of a perfectly diffuse reflector (also called a Lambertian reflector), the luminance is isotropic, per Lambert's cosine law. Then the relationship is simply
$L_\mathrm = \frac$

See also

* Irradiance
*Exposure value
* Luminance

References

External links

Illuminance Converter
* Knowledgedoor, LLC (2005

* Kodak's guide t
Estimating Luminance and Illuminance
using a camera's exposure meter. Also available i
PDF form

{{Authority control

Physical quantities
Photometry