Lorica segmentata

The ''lorica segmentata'' (), also called ''lorica lamminata'' (see §Name), is a type of personal armour that was used by soldiers of the Roman army, consisting of metal strips fashioned into circular bands, fastened to internal leather straps. The ''lorica segmentata'' has come to be viewed as iconic of the Roman legions in popular culture. The tendency to portray Roman legionaries clad in this type of armour often extends to periods of time that are too early or too late in history.

History

Despite the armor being commonly associated with the Romans, it was used by other civilizations before the Romans. The armor was originally used by the Parthians and possibly the Dacians, Scythians, or Sarmatians before the Romans used it. Some sets of armor similar to the ''lorica segmentata'' dating back to the 4th century BC have been found in archaeological sites located in the steppe. Although the exact time at which the Romans adopted the armor remains unknown, it is possible that the ''lorica segmentata'' was introduced after Crassus' defeat at Carrhae in 53 BC. Another possibility is that the armor was adopted in 21 AD after the Revolt of Julius Sacrovir and Julius Florus. One form of the armor was used as early as 9 AD. Because the soldiers at the Battle of Teutoberg Forest wore the ''lorica segmentata'', it must have been in use before 9 AD.

Around the middle of the third century the ''lorica segmentata'' fell out of favor with the Roman army, although it did remain in use during the Late Roman Empire. Soldiers wearing the ''lorica segmentata'' were depicted on the Arch of Constantine, a monument erected in 315. However, it has been argued that these depictions are from an earlier monument by Marcus Aurelius, from which Constantine incorporated portions into his Arch. The latest known use of the armor was in the 4th century.

Over time the type of ''lorica segmentata'' would change. From 9 BC to 43 AD the Roman soldier wore the Dangstetten-Kalkriese-Vindonissa type, from 69 to 100 the Corbridge-Carnuntum type was used. From 164 to 180, the Newstead type was used. The time the armors were used overlapped. It is possible that there was a fourth type, covering the body with segmented armor joined to scale shoulder defenses. However, this is only known from one badly damaged statue originating at Alba Iulia in Romania. This armor was used from about 14 BC to the late 3rd century AD. The ''lorica segmentata's'' use in the Roman army was geographically widespread, but the mail armor '' lorica hamata'' may have been more common at all times.

Usage in the Roman army

It is unclear who used this armor. On monuments, ''Auxilia'' are generally shown wearing mail, cuirasses, and carrying oval shields. Legionaries are depicted wearing the ''lorica segmentata'' and carrying the curved rectangular shield. On this basis, it has been supposed that ''lorica segmentata'' was exclusively used by legionaries and praetorians. However, some historians consider Trajan's Column to be inaccurate as a historical source due to its inaccurate and stylized portrayal of Roman armor. These historians also say that "it is probably safest to interpret the Column reliefs as 'impressions', rather than accurate representations." The discovery of parts of the ''lorica segmentata'' at areas where auxiliary soldiers would have been stationed implies that auxiliary troops used the ''lorica segmentata''. However, it is entirely possible that the reason behind the presence of the ''lorica segmentata'' in these areas could because these areas had a small number of legionaries stationed there. On the Adamclisi ''Tropaeum'', the ''lorica segmentata'' does not appear at all, and legionaries and ''auxilia'' alike are depicted wearing the ''lorica squamata''. Some experts are of the opinion that the Adamclisi monument is a more accurate portrayal of the situation. It may have been used rarely, maybe only for set-piece battles and parades. This viewpoint considers the figures in Trajan's Column to be highly stereotyped, in order to distinguish clearly between different types of troops. It's also debated if the lorica segmentata was only used in the west. Every archaeological find of such armor has been made in the western part of the Roman Empire but never in the east.

Forging

The plates in the ''lorica segmentata'' armor were made by overlapping ferrous plates that were then riveted to straps made from leather. It is unknown what animal was used to make the leather and if it was tanned or tawed. The plates were made of soft iron on the inside and rolled mild steel on the outside. This made the plates hardened against damage without making them brittle. This case hardening was done by packing organic matter tightly around them and heating them in a forge, transferring carbon from the burnt materials into the surface of the metal."Iron for the Eagles", by David Sim & Isabel Ridge The plates were made from beating out ingots. The strips were arranged horizontally on the body, overlapping downwards, and they surrounded the torso in two halves, being fastened at the front and back. Additional strips, shoulder guards, breastplates, and backplates were used to protect the upper body and the shoulders. The form of the armor allowed it to be stored very compactly, since it was possible to separate it into four sections, each of which would collapse on itself into a compact mass. The fitments that closed the various plate sections together (buckles, lobate hinges, hinged straps, tie-hooks, tie-rings, etc.) were made of brass. In later variants dating from around 75–80 A.D., the fastenings of the armor were simplified. Bronze hinges were removed in favor of simple rivets, belt fastenings utilized small hooks, and the lowest two girdle plates were replaced by one broad plate. The component parts of the ''lorica segmentata'' moved in synchronization with the other parts. This made it so the armor was more flexible. The armor was very long lasting. The Kalkriese type of armor lasted 55 years, the Corbridge armor lasted 70 years, and the Newsteadtype lasted 90 years.

Name

In Latin, the name ''lorica segmentata'' translates to "segmented cuirass." However, this name was not given to the armor by the Romans. Instead, it was given by scholars in the 16th century. Despite the lack of knowledge on the Roman name for the armor, scholars can make educated guesses on the Roman name. It is obvious the name had the word ''lorica'' in its name. However, the following part of the name is unknown. Some scholars believe that the name was ''lorica lamminata''. This theory is based of the fact that the Romans referred to sheets of metal as lamina, although no firm evidence for any theory regarding the name of the armor currently exists.
File:046 Conrad Cichorius, Die Reliefs der Traianssäule, Tafel XLVI (Ausschnitt 01).jpg, Relief from Trajan's Column showing a legionary with ''lorica segmentata'', manning a '' carroballista''
File:047 Conrad Cichorius, Die Reliefs der Traianssäule, Tafel XLVII (Ausschnitt 01).jpg, Detail of Trajan's Column
File:Roman Pontoon Bridge, Column of Marcus Aurelius, Rome, Italy.jpg, Roman legionaries crossing the Danube River by pontoon bridge, as depicted in relief on the column of Emperor Marcus Aurelius (r. 161-180 AD) in Rome, Italy
File:Column of Marcus Aurelius - detail1.jpg, Column of Marcus Aurelius, Rome, Italy
File:Roman soldier in lorica segmentata 1-cropped.jpg, A reenactor dressed as a Roman soldier in ''lorica segmentata''
File:Lorica segmentata from back.jpg
File:Lorica segmentata detail front.jpg
File:Lorica segmentata from inside.jpg

See also

* Laminar armour
* '' Manica'' – Roman armguard of similar construction
* Lorica plumata
* Lorica hamata
* Lorica squamata

References

Bibliography

*
*

External links

''Lorica Segmentata Volume I: A Handbook of Articulated Roman Plate Armour'', M.C. Bishop, Armatura Press (November 1, 2002)
(online version)
Roman Army website, showing the third century finds of segmentata in spain
(downloadable PDF)


{{DEFAULTSORT:Lorica Segmentata
Ancient Roman legionary equipment
Roman armour