Lenz's law
   HOME

TheInfoList



OR:

Lenz's law states that the direction of the
electric current An electric current is a stream of charged particles, such as electrons or ions, moving through an electrical conductor or space. It is measured as the net rate of flow of electric charge through a surface or into a control volume. The movi ...
induced in a conductor by a changing
magnetic field A magnetic field is a vector field that describes the magnetic influence on moving electric charges, electric currents, and magnetic materials. A moving charge in a magnetic field experiences a force perpendicular to its own velocity and to ...
is such that the magnetic field created by the induced current opposes changes in the initial magnetic field. It is named after physicist
Emil Lenz Heinrich Friedrich Emil Lenz (; ; also Emil Khristianovich Lenz, russian: Эмилий Христианович Ленц; 12 February 1804 – 10 February 1865), usually cited as Emil Lenz or Heinrich Lenz in some countries, was a Russian physic ...
, who formulated it in 1834. It is a qualitative law that specifies the direction of induced current, but states nothing about its magnitude. Lenz's law predicts the direction of many effects in
electromagnetism In physics, electromagnetism is an interaction that occurs between particles with electric charge. It is the second-strongest of the four fundamental interactions, after the strong force, and it is the dominant force in the interactions o ...
, such as the direction of voltage induced in an
inductor An inductor, also called a coil, choke, or reactor, is a passive two-terminal electrical component that stores energy in a magnetic field when electric current flows through it. An inductor typically consists of an insulated wire wound into a c ...
or wire loop by a changing current, or the drag force of eddy currents exerted on moving objects in a magnetic field. Lenz's law may be seen as analogous to Newton's third law in
classical mechanics Classical mechanics is a physical theory describing the motion of macroscopic objects, from projectiles to parts of machinery, and astronomical objects, such as spacecraft, planets, stars, and galaxies. For objects governed by classi ...
Schmitt, Ron
''Electromagnetics explained''"> ''Electromagnetics explained''
2002. Retrieved 16 July 2010.
and
Le Chatelier's principle Le Chatelier's principle (pronounced or ), also called Chatelier's principle (or the Equilibrium Law), is a principle of chemistry used to predict the effect of a change in conditions on chemical equilibria. The principle is named after French ...
in chemistry.


Definition

Lenz's law states that:
The current induced in a circuit due to a change in a magnetic field is directed to oppose the change in flux and to exert a mechanical force which opposes the motion.
Lenz's law is contained in the rigorous treatment of
Faraday's law of induction Faraday's law of induction (briefly, Faraday's law) is a basic law of electromagnetism predicting how a magnetic field will interact with an electric circuit to produce an electromotive force (emf)—a phenomenon known as electromagnetic in ...
(the magnitude of EMF induced in a coil is proportional to the rate of change of the magnetic field), where it finds expression by the negative sign: \mathcal=-\frac, which indicates that the induced
electromotive force In electromagnetism and electronics, electromotive force (also electromotance, abbreviated emf, denoted \mathcal or ) is an energy transfer to an electric circuit per unit of electric charge, measured in volts. Devices called electrical '' tran ...
\mathcal and the rate of change in
magnetic flux In physics, specifically electromagnetism, the magnetic flux through a surface is the surface integral of the normal component of the magnetic field B over that surface. It is usually denoted or . The SI unit of magnetic flux is the weber ...
\Phi_\mathbf have opposite signs. This means that the direction of the back EMF of an induced field opposes the changing current that is its cause. D.J. Griffiths summarized it as follows: ''Nature abhors a change in flux.'' If a change in the magnetic field of current ''i''1 induces another
electric current An electric current is a stream of charged particles, such as electrons or ions, moving through an electrical conductor or space. It is measured as the net rate of flow of electric charge through a surface or into a control volume. The movi ...
, ''i''2, the direction of ''i''2 is opposite that of the change in ''i''1. If these currents are in two coaxial circular conductors ''ℓ''1 and ''ℓ''2 respectively, and both are initially 0, then the currents ''i''1 and ''i''2 must counter-rotate. The opposing currents will repel each other as a result.


Example

Magnetic fields from strong magnets can create counter-rotating currents in a copper or aluminium pipe. This is shown by dropping the magnet through the pipe. The descent of the magnet inside the pipe is observably slower than when dropped outside the pipe. When a voltage is generated by a change in magnetic flux according to Faraday's law, the polarity of the induced voltage is such that it produces a current whose magnetic field opposes the change which produces it. The induced magnetic field inside any loop of wire always acts to keep the magnetic flux in the loop constant. The direction of an induced current can be determined using the right-hand rule to show which direction of current flow would create a magnetic field that would oppose the direction of changing flux through the loop. In the examples above, if the flux is increasing, the induced field acts in opposition to it. If it is decreasing, the induced field acts in the direction of the applied field to oppose the change.


Detailed interaction of charges in these currents

In electromagnetism, when charges move along
electric field An electric field (sometimes E-field) is the physical field that surrounds electrically charged particles and exerts force on all other charged particles in the field, either attracting or repelling them. It also refers to the physical field ...
lines work is done on them, whether it involves storing potential energy (negative work) or increasing kinetic energy (positive work). When net positive work is applied to a charge ''q''1, it gains speed and momentum. The net work on ''q''1 thereby generates a magnetic field whose strength (in units of magnetic flux density (1 tesla = 1 volt-second per square meter)) is proportional to the speed increase of ''q''1. This magnetic field can interact with a neighboring charge ''q''2, passing on this momentum to it, and in return, ''q''1 loses momentum. The charge ''q''2 can also act on ''q''1 in a similar manner, by which it returns some of the momentum that it received from ''q''1. This back-and-forth component of momentum contributes to magnetic
inductance Inductance is the tendency of an electrical conductor to oppose a change in the electric current flowing through it. The flow of electric current creates a magnetic field around the conductor. The field strength depends on the magnitude of th ...
. The closer that ''q''1 and ''q''2 are, the greater the effect. When ''q''2 is inside a conductive medium such as a thick slab made of copper or aluminum, it more readily responds to the force applied to it by ''q''1. The energy of ''q''1 is not instantly consumed as heat generated by the current of ''q''2 but is also stored in ''two'' opposing magnetic fields. The energy density of magnetic fields tends to vary with the square of the magnetic field's intensity; however, in the case of magnetically non-linear materials such as ferromagnets and
superconductors Superconductivity is a set of physical properties observed in certain materials where electrical resistance vanishes and magnetic flux fields are expelled from the material. Any material exhibiting these properties is a superconductor. Unlike ...
, this relationship breaks down.


Conservation of momentum

Momentum must be conserved in the process, so if ''q''1 is pushed in one direction, then ''q''2 ought to be pushed in the other direction by the same force at the same time. However, the situation becomes more complicated when the finite speed of electromagnetic wave propagation is introduced (see retarded potential). This means that for a brief period the total momentum of the two charges is not conserved, implying that the difference should be accounted for by momentum in the fields, as asserted by
Richard P. Feynman Richard Phillips Feynman (; May 11, 1918 – February 15, 1988) was an American theoretical physicist, known for his work in the path integral formulation of quantum mechanics, the theory of quantum electrodynamics, the physics of the superflu ...
.''
The Feynman Lectures on Physics ''The Feynman Lectures on Physics'' is a physics textbook based on some lectures by Richard Feynman, a Nobel laureate who has sometimes been called "The Great Explainer". The lectures were presented before undergraduate students at the Cali ...
'': Volume I, Chapter 10, page 9.
Famous 19th century electrodynamicist
James Clerk Maxwell James Clerk Maxwell (13 June 1831 – 5 November 1879) was a Scottish mathematician and scientist responsible for the classical theory of electromagnetic radiation, which was the first theory to describe electricity, magnetism and ligh ...
called this the "electromagnetic momentum".Maxwell, James C
''A treatise on electricity and magnetism, Volume 2''
Retrieved 16 July 2010.
Yet, such a treatment of fields may be necessary when Lenz's law is applied to opposite charges. It is normally assumed that the charges in question have the same sign. If they do not, such as a proton and an electron, the interaction is different. An electron generating a magnetic field would generate an EMF that causes a proton to accelerate in the same direction as the electron. At first, this might seem to violate the law of conservation of momentum, but such an interaction is seen to conserve momentum if the momentum of electromagnetic fields is taken into account.


References


External links

* * {{YouTube, fxC-AEC0ROk, A dramatic demonstration of the effect with an
aluminum Aluminium (aluminum in American and Canadian English) is a chemical element with the symbol Al and atomic number 13. Aluminium has a density lower than those of other common metals, at approximately one third that of steel. It ha ...
block in an MRI Magnetic levitation Electrodynamics Articles containing video clips