Laboratory water bath
   HOME

TheInfoList



OR:

A water bath is laboratory equipment made from a container filled with heated water. It is used to incubate samples in water at a constant temperature over a long period of time. Most water baths have a digital or an analogue interface to allow users to set a desired temperature, but some water baths have their temperature controlled by a current passing through a reader. Utilisations include warming of
reagent In chemistry, a reagent ( ) or analytical reagent is a substance or compound added to a system to cause a chemical reaction, or test if one occurs. The terms ''reactant'' and ''reagent'' are often used interchangeably, but reactant specifies a ...
s, melting of substrates or incubation of cell cultures. It is also used to enable certain chemical reactions to occur at high temperature. Water baths are preferred heat sources for heating flammable chemicals, as their lack of open flame prevents
ignition Ignition may refer to: Science and technology * Firelighting, the human act of creating a fire for warmth, cooking and other uses * Combustion, an exothermic chemical reaction between a fuel and an oxidant * Fusion ignition, the point at which a ...
. Different types of water baths are used depending on application. For all water baths, it can be used up to 99.9 °C. When temperature is above 100 °C, alternative methods such as oil bath,
silicone A silicone or polysiloxane is a polymer made up of siloxane (−R2Si−O−SiR2−, where R = organic group). They are typically colorless oils or rubber-like substances. Silicones are used in sealants, adhesives, lubricants, medicine, cookin ...
bath or sand bath may be used.


Precautions

* Use with caution. * It is not recommended to use water bath with
moisture Moisture is the presence of a liquid, especially water, often in trace amounts. Small amounts of water may be found, for example, in the air (humidity), in foods, and in some commercial products. Moisture also refers to the amount of water vapo ...
sensitive or
pyrophoric A substance is pyrophoric (from grc-gre, πυροφόρος, , 'fire-bearing') if it ignites spontaneously in air at or below (for gases) or within 5 minutes after coming into contact with air (for liquids and solids). Examples are organolith ...
reactions. Do not heat a bath fluid above its flash point. * Water level should be regularly monitored, and filled with distilled water only. This is required to prevent salts from depositing on the heater. *
Disinfectant A disinfectant is a chemical substance or compound used to inactivate or destroy microorganisms on inert surfaces. Disinfection does not necessarily kill all microorganisms, especially resistant bacterial spores; it is less effective than s ...
s can be added to prevent growth of organisms. * Raise the temperature to 90 °C or higher to once a week for half an hour for the purpose of
decontamination Decontamination (sometimes abbreviated as decon, dcon, or decontam) is the process of removing contaminants on an object or area, including chemicals, micro-organisms or radioactive substances. This may be achieved by chemical reaction, disinfecti ...
. * Markers tend to come off easily in water baths. Use water resistant ones. * If application involves liquids that give off fumes, it is recommended to operate water bath in fume hood or in a well ventilated area. * The cover is closed to prevent evaporation and to help reaching high temperatures. * Set up on a steady surface away from
flammable A combustible material is something that can burn (i.e., ''combust'') in air. A combustible material is flammable if it ignites easily at ambient temperatures. In other words, a combustible material ignites with some effort and a flammable mat ...
materials.


Types of water bath


Circulating water baths

Circulating water baths (also called ''stirrers'' '')'' are ideal for applications when temperature uniformity and consistency are critical, such as enzymatic and serologic experiments. Water is thoroughly circulated throughout the bath resulting in a more uniform temperature.


Non-circulating water baths

This type of water bath relies primarily on
convection Convection is single or multiphase fluid flow that occurs spontaneously due to the combined effects of material property heterogeneity and body forces on a fluid, most commonly density and gravity (see buoyancy). When the cause of the c ...
instead of water being uniformly heated. Therefore, it is less accurate in terms of temperature control. In addition, there are add-ons that provide stirring to non-circulating water baths to create more uniform heat transfer.


Shaking water baths

This type of water bath has extra control for shaking, which moves liquids around. This shaking feature can be turned on or off. In
microbiological Microbiology () is the scientific study of microorganisms, those being unicellular (single cell), multicellular (cell colony), or acellular (lacking cells). Microbiology encompasses numerous sub-disciplines including virology, bacteriology, pro ...
practices, constant shaking allows liquid-grown
cell cultures Cell culture or tissue culture is the process by which cells are grown under controlled conditions, generally outside of their natural environment. The term "tissue culture" was coined by American pathologist Montrose Thomas Burrows. This tec ...
grown to constantly mix with the air. Some key benefits of shaking water bath are user-friendly operation via keypad, convenient bath drains, adjustable shaking frequencies, bright LED-display, optional lift-up bath cover, power switch integrated in keypad and warning and cut-off protection for low/high temperature.


Water bath technologies

The bath is a fundamental product in any laboratory. Over the years, water baths have evolved from basic analog tools to advanced digital machines capable of sophisticated and programmable controls, functions, and capabilities. Key features in water baths often include: * Multi-language operation * User-settable limit values * "Eco modes" which save energy after set programs are completed * User-settable alarms: audible, visible or both * Displays of actual and/or set point temperatures * Programmable pre-sets for frequently used temperatures * Integrated timers * Hinged gable covers * Calibration off-set capabilities * Stainless reservoirs * Reservoir drains * Primary and automatic safety thermostats * Compatible with waterless alloy bath beads


Additional images

File:WaterBath.jpg, LWIA seawater cleaning methods; water bath with injector block, septum support and insert. File:Water bath adjustment knob 2015.jpg, Temperature control knob of a water bath File:Inside water bath.JPG, Inside water bath with micro-centrifuge rack File:Floating Rack for Water Bath (5544004133).jpg, A water bath float rack.


See also

*
Thermal immersion circulator A thermal immersion circulator is an electrically powered device that circulates and heats a warm fluid kept at an accurate and stable temperature. It is used in process, environmental, microbiological, hazardous waste, and other laboratories. Sin ...
* Heated bath *
Hot plate A hot plate is a portable self-contained tabletop small appliance cooktop that features one or more electric heating elements or gas burners. A hot plate can be used as a stand-alone appliance, but is often used as a substitute for one of t ...
* Sand bath * Oil bath


References

{{Laboratory equipment Laboratory equipment Microbiology equipment Articles containing video clips