Lightweight Access Point Protocol (LWAPP) is the name of a protocol that can control multiple
Wi-Fi wireless access points at once. This can reduce the amount of time spent on configuring, monitoring or troubleshooting a large network. The system will also allow network administrators to closely analyze the network.
This system is installed in a central server that gathers data from RF devices from different brands and settings. The server can command a selected group of devices to apply given settings simultaneously.
Standardization
LWAPP was proposed by
Airespace, as a standard protocol to provide interoperability among any brand of access point. Airespace was purchased by
Cisco Systems. Its purpose was to standardize "lightweight" access points with the Internet Engineering Task Force (
IETF), but it was approved as a standard. Sponsored by Cisco Systems, it has been submitted to IETF in RFC 5412.
Although this protocol has so far not been popular beyond the Airespace/Cisco product lines, the
CAPWAP The Control And Provisioning of Wireless Access Points (CAPWAP) protocol is a standard, interoperable networking protocol that enables a central wireless LAN ''Access Controller (AC)'' to manage a collection of ''Wireless Termination Points (WTPs)'' ...
standard is based on LWAPP. Support for LWAPP is also found in analysis products from
AirMagnet
AirMagnet was a Wi-Fi ''wireless network assurance'' company based in Sunnyvale, California. The firm was founded in 2001 by Dean T. Au, Chia-Chee Kuan and Miles Wu and shipped its first WLAN analyzer product in 2002. In August 2006, the compan ...
, who has implemented a software based on this protocol to analyze Cisco wireless products.
Still considered proprietary, LWAPP systems compete with other non-standard lightweight wireless mechanisms from companies like Meru Networks and Aruba Networks.
LWAPP Layer 2
On
Layer 2, LWAPP only requires a data link connection in order to transfer frames and Layer 2 broadcasts. Even if IP connectivity is not established it will still operate at layer 2.
LWAPP Layer 3 and 4
Layer 4 UDP 12222 (data channel) and 12223 (control channel) connectivity must be established to work with this form of the protocol. Broadcasts or
DHCP option 43 can be used to prime the access-points of the network. The controller must be on the same subnet if DHCP is not configured to handle layer 3 LWAPP provisioning. Another option for directing an AP to the controller is by defining the controller on the DNS server of the network.
See also
*
CAPWAP The Control And Provisioning of Wireless Access Points (CAPWAP) protocol is a standard, interoperable networking protocol that enables a central wireless LAN ''Access Controller (AC)'' to manage a collection of ''Wireless Termination Points (WTPs)'' ...
- Control and provisioning of wireless access points (CAPWAP) protocol specification
References
External links
Cisco Wireless LAN Controller Configuration Guide, Release 4.0*
Lightweight Access Point Protocol IETF Standard Control And Provisioning of Wireless Access Points (CAPWAP)Protocol Specification
{{DEFAULTSORT:Lwapp
Internet protocols