Kolmogorov microscales
   HOME

TheInfoList



OR:

In fluid dynamics, Kolmogorov microscales are the smallest scales in the
turbulent flow In fluid dynamics, turbulence or turbulent flow is fluid motion characterized by chaotic changes in pressure and flow velocity. It is in contrast to a laminar flow, which occurs when a fluid flows in parallel layers, with no disruption between t ...
of fluids. At the Kolmogorov scale,
viscosity The viscosity of a fluid is a measure of its resistance to deformation at a given rate. For liquids, it corresponds to the informal concept of "thickness": for example, syrup has a higher viscosity than water. Viscosity quantifies the inte ...
dominates and the
turbulence kinetic energy In fluid dynamics, turbulence kinetic energy (TKE) is the mean kinetic energy per unit mass associated with eddies in turbulent flow. Physically, the turbulence kinetic energy is characterised by measured root-mean-square (RMS) velocity fluctuat ...
is
dissipated In thermodynamics, dissipation is the result of an irreversible process that takes place in homogeneous thermodynamic systems. In a dissipative process, energy ( internal, bulk flow kinetic, or system potential) transforms from an initial form to ...
into
thermal energy The term "thermal energy" is used loosely in various contexts in physics and engineering. It can refer to several different well-defined physical concepts. These include the internal energy or enthalpy of a body of matter and radiation; heat, de ...
. They are defined by where * is the average rate of dissipation of turbulence kinetic energy per unit mass, and * is the
kinematic viscosity The viscosity of a fluid is a measure of its resistance to deformation at a given rate. For liquids, it corresponds to the informal concept of "thickness": for example, syrup has a higher viscosity than water. Viscosity quantifies the int ...
of the fluid. Typical values of the Kolmogorov length scale, for atmospheric motion in which the large eddies have length scales on the order of kilometers, range from 0.1 to 10 millimeters; for smaller flows such as in laboratory systems, may be much smaller. In 1941,
Andrey Kolmogorov Andrey Nikolaevich Kolmogorov ( rus, Андре́й Никола́евич Колмого́ров, p=ɐnˈdrʲej nʲɪkɐˈlajɪvʲɪtɕ kəlmɐˈɡorəf, a=Ru-Andrey Nikolaevich Kolmogorov.ogg, 25 April 1903 – 20 October 1987) was a Sovi ...
introduced the hypothesis that the smallest scales of
turbulence In fluid dynamics, turbulence or turbulent flow is fluid motion characterized by chaotic changes in pressure and flow velocity. It is in contrast to a laminar flow, which occurs when a fluid flows in parallel layers, with no disruption between ...
are universal (similar for every
turbulent flow In fluid dynamics, turbulence or turbulent flow is fluid motion characterized by chaotic changes in pressure and flow velocity. It is in contrast to a laminar flow, which occurs when a fluid flows in parallel layers, with no disruption between t ...
) and that they depend only on and . The definitions of the Kolmogorov microscales can be obtained using this idea and
dimensional analysis In engineering and science, dimensional analysis is the analysis of the relationships between different physical quantities by identifying their base quantities (such as length, mass, time, and electric current) and units of measure (such as mi ...
. Since the dimension of kinematic viscosity is length2/time, and the dimension of the
energy dissipation In thermodynamics, dissipation is the result of an irreversible process that takes place in homogeneous thermodynamic systems. In a dissipative process, energy (internal, bulk flow kinetic, or system potential) transforms from an initial form to ...
rate per unit mass is length2/time3, the only combination that has the dimension of time is \tau_\eta=\sqrt which is the Kolmorogov time scale. Similarly, the Kolmogorov length scale is the only combination of and that has dimension of length. Alternatively, the definition of the Kolmogorov time scale can be obtained from the inverse of the mean square
strain rate tensor In continuum mechanics, the strain-rate tensor or rate-of-strain tensor is a physical quantity that describes the rate of change of the deformation of a material in the neighborhood of a certain point, at a certain moment of time. It can be def ...
, \tau_\eta = \tfrac, which also gives \tau_\eta = \sqrt using the definition of the energy dissipation rate per unit mass \varepsilon = 2 \nu \langle E_ E_ \rangle . Then the Kolmogorov length scale can be obtained as the scale at which the Reynolds number () is equal to 1, : \mathrm = \frac = \frac = 1. Kolmogorov's 1941 theory is a
mean field theory In physics and probability theory, Mean-field theory (MFT) or Self-consistent field theory studies the behavior of high-dimensional random (stochastic) models by studying a simpler model that approximates the original by averaging over degrees of ...
since it assumes that the relevant dynamical parameter is the mean energy dissipation rate. In
fluid turbulence In fluid dynamics, turbulence or turbulent flow is fluid motion characterized by chaotic changes in pressure and flow velocity. It is in contrast to a laminar flow, which occurs when a fluid flows in parallel layers, with no disruption betwee ...
, the energy dissipation rate fluctuates in space and time, so it is possible to think of the microscales as quantities that also vary in space and time. However, standard practice is to use mean field values since they represent the typical values of the smallest scales in a given flow. In 1961, Kolomogorov published a refined version of the similarity hypotheses that accounts for the log-normal distribution of the dissipation rate.


See also

*
Taylor microscale The Taylor microscale, which is sometimes called the turbulence length scale, is a length scale used to characterize a turbulent fluid flow. This microscale is named after Geoffrey Ingram Taylor. The Taylor microscale is the intermediate length scal ...
*
Integral length scale The integral length scale measures the correlation distance of a process in terms of space or time. In essence, it looks at the overall memory of the process and how it is influenced by previous positions and parameters. An intuitive example would ...
*
Batchelor scale In fluid dynamics, fluid and molecular dynamics, the Batchelor scale, determined by George Batchelor (1959), describes the size of a droplet of fluid that will diffuse in the same time it takes the energy in an Eddy (fluid dynamics), eddy of size ...


References

{{DEFAULTSORT:Kolmogorov Microscales Turbulence