IEC 61851 on:
[Wikipedia]
[Google]
[Amazon]
IEC 61851 is an international standard for
IEC 61851-25
/ref>
IEC 61851 is an international standard for electric vehicle
An electric vehicle (EV) is a vehicle that uses one or more electric motors for propulsion. It can be powered by a collector system, with electricity from extravehicular sources, or it can be powered autonomously by a battery (sometimes ch ...
conductive charging systems, parts of which are currently still under development(written 2017). IEC 61851 is one of the International Electrotechnical Commission
The International Electrotechnical Commission (IEC; in French: ''Commission électrotechnique internationale'') is an international standards organization that prepares and publishes international standards for all electrical, electronic and ...
's group of standards for electric road vehicles and electric industrial trucks and is the responsibility of IEC Technical Committee 69 (TC69).
Standard documents
IEC 61851 consists of the following parts, detailed in separate IEC 61851 standard documents: * IEC 61851-1: General requirements * IEC 61851-21-1: Electric vehicle on-board charger EMC requirements for conductive connection to AC/DC supply *IEC 61851-21-2: Electric vehicle requirements for conductive connection to an AC/DC supply - EMC requirements for off board electric vehicle charging systems * IEC 61851-23: DC electric vehicle charging station * IEC 61851-24: Digital communication between a DC EV charging station and an electric vehicle for control of DC charging * IEC 61851-25: DC EV supply equipment where protection relies on electrical separation/ref>
IEC 61851-1
IEC 61851-1 defines four modes of charging:References
See also
*ISO 15118
ISO 15118 ''Road vehicles -- Vehicle to grid communication interface'' is a proposed international standard defining a vehicle to grid (V2G) communication interface for bi-directional charging/discharging of electric vehicles. The standard provid ...
* IEC 61850
IEC 61850 is an international standard defining communication protocols for intelligent electronic devices at electrical substations. It is a part of the International Electrotechnical Commission's (IEC) Technical Committee 57 reference archit ...
* IEC 62196
IEC 62196 ''Plugs, socket-outlets, vehicle connectors and vehicle inlets – Conductive charging of electric vehicles'' is a series of international standards that define requirements and tests for plugs, socket-outlets, vehicle connectors and veh ...
* IEC 63110 IEC 63110 is an international standard defining a protocol for the management of electric vehicles charging and discharging infrastructures, which is currently under development. IEC 63110 is one of the International Electrotechnical Commission's gr ...
* OpenEVSE OpenEVSE is an Arduino-based charging station created by Christopher Howell and Sam C. Lin. The charger is composed of open-source software and hardware which can be made DIY.
History
The project started in February 2011 with a simple experiment ...
{{Electric vehicles
Electric vehicles
#61851