Hatzegopteryx

''Hatzegopteryx'' (" Hațeg basin wing") is a genus of azhdarchid pterosaur found in the late Maastrichtian deposits of the Densuş Ciula Formation, an outcropping in Transylvania, Romania. It is known only from the type species, ''Hatzegopteryx thambema'', named by Buffetaut ''et al.'' in 2002 based on parts of the skull and humerus. Additional specimens, including a neck vertebra, were later placed in the genus, representing a range of sizes. The largest of these remains indicate it was among the biggest pterosaurs, with an estimated wingspan of .

Unusually among giant azhdarchids, ''Hatzegopteryx'' had a very wide skull bearing large muscular attachments; bones with a spongy internal texture instead of hollow; and a short, robust, and heavily muscled neck measuring long, which was about half the length of other azhdarchids with comparable wingspans, and was capable of withstanding strong bending forces. ''Hatzegopteryx'' inhabited Hațeg Island, an island situated in the Cretaceous subtropics within the prehistoric Tethys Sea. In the absence of large theropods, ''Hatzegopteryx'' was likely the apex predator of Hațeg Island, tackling proportionally larger prey (including dwarf titanosaurs and iguanodontians) than other azhdarchids.

Discovery and naming

The first pterosaur remains from Romania were identified by Franz Nopcsa in 1899, and the first remains of ''Hatzegopteryx'' were found during a student dig during the late 1970s from the upper part of the Middle Densuş Ciula Formation of Vălioara, northwestern Hațeg Basin, Transylvania, western Romania, which has been dated to the late Maastrichtian stage of the Late Cretaceous Period, around 66 million years ago. The holotype of ''Hatzegopteryx'', FGGUB R 1083A, consists of two fragments from the back of the skull and the damaged proximal part of a left humerus. One of these fragments, namely the occipital region, was initially referred to a theropod dinosaur when it was first announced in 1991. A long middle section of a femur found nearby, FGGUB R1625, may also belong to ''Hatzegopteryx''. FGGUB R1625 would have belonged to a smaller individual of ''Hatzegopteryx'' (assuming it pertains to the genus), with a wingspan. Additional reported specimens from the locality include an unpublished mandible, also from a large individual.

''Hatzegopteryx'' was named in 2002 by French paleontologist Eric Buffetaut, and Romanian paleontologists Dan Grigorescu and Zoltan Csiki. The generic name is derived from the ''Hatzeg'' (or Hațeg) basin of Transylvania, where the bones were found, and from Greek ''pteryx'' (ἡ πτέρυξ, -υγος (also ἡ πτερύξ, -ῦγος), or 'wing'. The specific name ''thambema'' is derived from the Greek for 'terror, monster' (τό θάμβημα, -ήματος), in reference to its huge size.

New specimens of ''Hatzegopteryx'' have since been recovered from other localities. In the Sânpetru Formation from the locality of Vadu, Sântămăria-Orlea, a medium-sized scapulocoracoid was found, which probably pertained to an individual with a wingspan of . From the Râpa Roșie locality of the Sebeș Formation, which is contemporary and adjacent to the Densuș Ciula Formation, a single large neck vertebra, the "RR specimen" or EME 215, was found. Although the lack of overlapping elements prevents this specimen from being definitely referred to ''Hatzegopteryx thambema'', its distinctive internal bone structure, as well as the lack of evidence for a second giant azhdarchid in the area, warrant its referral to at least ''H. sp.''

Description

Skull

The skull of ''Hatzegopteryx'' was giant, with an initially estimated length of based on comparisons with '' Nyctosaurus'' and ''Anhanguera'', making it one of the largest skulls among non-marine animals. The skull was broadened in the rear, being wide across the quadrate bones. While most pterosaur skulls are composed of gracile plates and struts, in ''Hatzegopteryx'' the skull bones are stout and robust, with large ridges indicating strong muscular attachments. In 2018, Mátyás Vremir concluded that ''Hatzegopteryx'' likely had a shorter and broader skull, the length of which he estimated at .

The massive jaw bore a distinctive groove at its point of articulation (also seen in some other pterosaurs, including '' Pteranodon'') that would have allowed the animal to achieve a very wide gape. Unpublished remains attributed to ''Hatzegopteryx'' suggest that it had a proportionally short, deep beak, grouping with the "blunt-beaked" azhdarchids rather than the "slender-beaked" azhdarchids (including ''Quetzalcoatlus sp.'').

Cervical vertebrae

A large neck vertebra attributed to ''Hatzegopteryx'' is short and unusually robust. The preserved portion measures long, with the entire vertebra likely measuring long in life. Pterosaurs had nine neck vertebrae; regression indicates that the third to seventh cervical vertebrae would have collectively measured in length, with the longest vertebra - the fifth - only measuring approximately long. Meanwhile, the same vertebrae in the similarly giant '' Arambourgiania'' measured ; this indicates that the neck of ''Hatzegopteryx'' is about 50–60% the length of what would be expected for a giant azhdarchid of its size.

The bottom surface of the neck vertebra was also unusually thick, at . For most other giant azhdarchids, including ''Arambourgiania'', this surface is less than thick. Although the neural spine of the vertebra is not completely preserved, the width of the preserved portion suggests that it was relatively tall and robust relative to those of other pterosaurs. Other aspects of the vertebra converge upon the seventh neck vertebra of the smaller '' Azhdarcho'' most closely: the articulating sockets (cotyles) are much shallower than the neural arches, and are four times as wide as they are tall; a process on the bottom of the vertebrae, known as a hypapophysis, is present; the processes at the front of the vertebrae, the prezygapophyses, are splayed; and the vertebra has a tapered "waist" in the middle of the centrum. Although initially identified as a third neck vertebra, these traits supports the identification of the vertebra as coming from the rear of the neck, more specifically as being the seventh vertebra.

Size

The size of ''Hatzegopteryx'' was initially estimated by comparing the humerus fragment with that of ''Quetzalcoatlus northropi'', which has a -long humerus. Observing that the ''Hatzegopteryx'' fragment presented less than half of the original bone, Buffetaut ''et al.'' established that it could possibly have been "slightly longer" than that of ''Quetzalcoatlus''. The wingspan of the latter had been estimated at in 1981; earlier estimates had strongly exceeded this at . They concluded that an estimate of a wing span for ''Hatzegopteryx'' was conservative, "provided that its humerus was longer than that of ''Q. northropi''". In 2010, Mark Witton and Michael Habib concluded that ''Hatzegopteryx'' was probably no larger than ''Q. northropi'' in wingspan; the initial conclusions did not account for distortion of the bone. The latter is generally estimated at in length.

It has been suggested, on the basis of the wide and robust neck vertebra referred to ''Hatzegopteryx'', that the entire vertebral column of the animal was similarly expanded, increasing its overall size. However, this is likely not true, since the neck vertebrae of large pterodactyloids generally tend to be wider and larger than the rest of the vertebrae. Although estimates of pterosaur size based on vertebrae alone are not particularly reliable, the size of this vertebra is consistent with an animal that measured in wingspan.

Classification

Similarities between the humerus of ''Hatzegopteryx'' and '' Quetzalcoatlus northropi'' have been noted; both have a long, smooth deltopectoral crest, and a thickened humeral head. These were initially the basis of the taxon's referral to the clade Azhdarchidae, but they are also similar enough to be a basis for the synonymy of ''Hatzegopteryx'' and ''Quetzalcoatlus''. However, this is likely due to the relatively non-diagnostic nature of the humerus in giant azhdarchid taxonomy, and the lack of a detailed description for the elements of ''Q. northropi''. However, the neck and jaw anatomy of ''Hatzegopteryx'' is quite clearly distinct from the smaller ''Q. sp.'', which warrants the retention of ''Hatzegopteryx'' as a taxon separate from ''Quetzalcoatlus''.

The neck vertebra referred to ''Hatzegopteryx sp.'' contains a number of traits that allow for it to be definitely identified as that of an azhdarchid. The centrum is relatively low, the zygapophyses are large and flattened, and the preserved portions of the neural spine indicate that it is bifid, or split into two. A phylogenetic analysis conducted by Nicholas Longrich and colleagues in 2018 had recovered ''Hatzegopteryx'' within the Azhdarchidae in a derived position, sister taxon to both ''Arambourgiania'' and ''Quetzalcoatlus''. The cladogram of their analysis is presented below:

Paleobiology

Bone structure

While the skull of ''Hatzegopteryx'' was unusually large and robust, its wing bones are comparable to those of other flying pterosaurs, indicating that it was not flightless. Buffetaut ''et al.'' suggested that, in order to fly, the skull weight of ''Hatzegopteryx'' must have been reduced in some way. The necessary weight reduction may have accomplished by the internal structure of the skull bones, which were full of small pits and hollows (alveoli) up to long, separated by a matrix of thin bony struts (trabeculae). The wing bones also bear a similar internal structure. This unusual construction differs from that of other pterosaurs, and resembles more closely the structure of expanded polystyrene (used to manufacture Styrofoam). This would have made the skull sturdy and stress-resistant, but also lightweight, enabling the animal to fly. A similar internal structure is also seen in the cervical vertebra referred to ''Hatzegopteryx''.

Neck biomechanics

As a consequence of its robust, thick-walled vertebrae, the neck of ''Hatzegopteryx'' was much stronger than that of '' Arambourgiania''. This can be quantified using relative failure force, which is the bone failure force of a vertebra divided by the body weight of the pterosaur that it belongs, estimated at for ''Arambourgiania'' and ''Hatzegopteryx''. While ''Arambourgianias neck vertebrae fail at about half of its body weight, the posterior neck vertebrae of ''Hatzegopteryx'' can withstand anywhere between five to ten body weights, depending on the loading of the bone. Even the hypothetically longer anterior neck vertebrae of ''Hatzegopteryx'' would be able to withstand four to seven body weights.

Although the centrum of ''Hatzegopteryx'' is much more robust than ''Arambourgiania'', their ratios of bone radius to bone thickness (R/t) are roughly the same (9.45 for ''Hatzegopteryx'' and 9.9 for ''Arambourgiania''). This may represent a compromise between increasing bending strength and buckling strength; higher R/t ratios lead to improved bending strength, but weaker buckling strength. To compensate for this, ''Hatzegopteryx'' shows a number of other adaptations to improve buckling strength, namely the distinctive internal structures of the bones and the large articular joints of the vertebrae, the latter of which helps to distribute stress.

In order to support the robust head, the neck of ''Hatzegopteryx'' was likely strongly muscled. On the occipital bones, the nuchal lines, which serve as muscular attachments, are very well-developed and bear prominent scars. These conceivably supported the transversospinalis muscles, which aid in extension and flexion of the head and neck. Likewise, the opisthotic process, neural spines, and zygapophyses all appeared to have been large and robust (with the latter bearing many pits and edges that likely represent muscle scars), and the basioccipital tuberosities were long; these all serve as points of attachment for various muscles of the head and neck. Although not entirely unmuscled, the neck of ''Arambourgiania'' probably would not have been as extensively muscled as that of ''Hatzegopteryx''.

Paleoecology

Like all azhdarchid pterosaurs, ''Hatzegopteryx'' was probably a terrestrially foraging generalist predator. It is significantly larger than any other terrestrial predator from Maastrichtian Europe; due to its large size in an environment otherwise dominated by island dwarf dinosaurs, with no large hypercarnivorous theropods in the region, it has been suggested that ''Hatzegopteryx'' played the role of an apex predator in the Hațeg Island ecosystem. The robust anatomy of ''Hatzegopteryx'' suggests that it may have tackled larger prey than other azhdarchids, including animals too large to swallow whole. Meanwhile, other giant azhdarchids like '' Arambourgiania'' would probably have instead fed on small prey (up to the size of a human), including hatchling or small dinosaurs and eggs. Another pterosaur, '' Thalassodromeus'', has similarly been suggested to be raptorial.

Apart from ''Hatzegopteryx'', there are various other unusual denizens of the Hațeg Island ecosystem. Co-occurring pterosaurs included the small azhdarchid '' Eurazhdarcho'', with a wingspan of ; an unnamed, small-sized short-necked azhdarchid with a wingspan of ; a somewhat larger and likewise unnamed azhdarchid, with a wingspan of ; and apparently small pteranodontids have been found as well. The robust, flightless, and possibly herbivorous avialan or dromaeosaurid '' Balaur'', which had two enlarged claws on each foot, represents another highly specialized component of the fauna. The ecosystem contained a number of insular dwarfs, namely the titanosaurs '' Magyarosaurus'' and '' Paludititan'', the hadrosaurid '' Telmatosaurus'', and the iguanodontian ''Zalmoxes''. Along with the nodosaurid ''Struthiosaurus'', various small, fragmentary maniraptorans were present: ''Bradycneme'', ''Elopteryx'', and '' Heptasteornis''. Crocodilian remains, belonging to the genera '' Allodaposuchus'', '' Doratodon'', and '' Acynodon'' have also been found. Non-archosaurian components include the kogaionid multituberculate mammals '' Kogaionon'', ''Barbatodon'', ''Litovoi tholocephalos'', and ''Hainina''; lizards such as the teiid ''Bicuspidon'' and the paramacellodid '' Becklesius''; an unnamed madtsoiid snake; and the lissamphibians ''Albanerpeton'', '' Eodiscoglossus'', and '' Paradiscoglossus''.

During the Maastrichtian, southern Europe was an archipelago. The members of the Hațeg Island ecosystem lived on a landmass known as the Tisia–Dacia Block, of which the Hațeg Basin was a small part. This landmass was about in area, and was separated from other terrestrial terrains by stretches of deep ocean in all directions by . Being located at 27°N, the island was located farther south than the present-day latitude of 45°N; the climate was likely subtropical, with distinct dry and wet seasons, and an average temperature of about . The environment consisted of various alluvial plains, wetlands, and rivers, surrounded by woodlands dominated by ferns and angiosperms. Paleosols indicate a relatively dry Cretaceous climate, with an annual precipitation of less than .

See also

* List of pterosaur genera
* Timeline of pterosaur research
* Pterosaur size

References

External links

{{Portal bar, Paleontology, Cretaceous, Romania

Azhdarchids
Late Cretaceous pterosaurs of Europe
Geography of Transylvania
Maastrichtian life
Fossil taxa described in 2002
Hațeg fauna
Apex predators