A stone tool is, in the most general sense, any tool made either partially or entirely out of stone. Although stone tool-dependent societies and cultures still exist today, most stone tools are associated with prehistoric (particularly Stone Age) cultures that have become extinct. Archaeologists often study such prehistoric societies, and refer to the study of stone tools as

lithic analysis In archaeology, lithic analysis is the analysis of stone tools and other chipped stone artifacts using basic scientific techniques. At its most basic level, lithic analyses involve an analysis of the artifact’s morphology, the measurement of ...

Ethnoarchaeology Ethnoarchaeology is the ethnographic study of peoples for archaeological reasons, usually through the study of the material remains of a society (see David & Kramer 2001). Ethnoarchaeology aids archaeologists in reconstructing ancient lifeways by s ...

has been a valuable research field in order to further the understanding and cultural implications of stone tool use and manufacture. Stone has been used to make a wide variety of different tools throughout history, including arrowheads,

spear A spear is a pole weapon consisting of a shaft, usually of wood, with a pointed head. The head may be simply the sharpened end of the shaft itself, as is the case with fire hardened spears, or it may be made of a more durable material fasten ...

heads,

hand axe A hand axe (or handaxe or Acheulean hand axe) is a prehistoric stone tool with two faces that is the longest-used tool in human history, yet there is no academic consensus on what they were used for. It is made from stone, usually flint or ch ...

s, and

querns Quern-stones are stone tools for hand- grinding a wide variety of materials. They are used in pairs. The lower stationary stone of early examples is called a saddle quern, while the upper mobile stone is called a muller, rubber or handstone. The ...

. Stone tools may be made of either

ground stone In archaeology, ground stone is a category of stone tool formed by the grinding of a coarse-grained tool stone, either purposely or incidentally. Ground stone tools are usually made of basalt, rhyolite, granite, or other cryptocrystalline a ...

or knapped stone, the latter fashioned by a

flintknapper Knapping is the shaping of flint, chert, obsidian, or other conchoidal fracturing stone through the process of lithic reduction to manufacture stone tools, strikers for flintlock firearms, or to produce flat-faced stones for building or facing ...

. Knapped stone tools are made from

cryptocrystal Cryptocrystalline is a rock texture made up of such minute crystals that its crystalline nature is only vaguely revealed even microscopically in thin section by transmitted polarized light. Among the sedimentary rocks, chert and flint are cryptocr ...

line materials such as

chert Chert () is a hard, fine-grained sedimentary rock composed of microcrystalline or cryptocrystalline quartz, the mineral form of silicon dioxide (SiO2). Chert is characteristically of biological origin, but may also occur inorganically as a ...

flint Flint, occasionally flintstone, is a sedimentary cryptocrystalline form of the mineral quartz, categorized as the variety of chert that occurs in chalk or marly limestone. Flint was widely used historically to make stone tools and sta ...

radiolarite Radiolarite is a siliceous, comparatively hard, fine-grained, chert-like, and homogeneous sedimentary rock that is composed predominantly of the microscopic remains of radiolarians. This term is also used for indurated radiolarian oozes and ...

chalcedony Chalcedony ( , or ) is a cryptocrystalline form of silica, composed of very fine intergrowths of quartz and moganite. These are both silica minerals, but they differ in that quartz has a trigonal crystal structure, while moganite is monocli ...

, obsidian,

basalt Basalt (; ) is an aphanitic (fine-grained) extrusive igneous rock formed from the rapid cooling of low-viscosity lava rich in magnesium and iron (mafic lava) exposed at or very near the surface of a rocky planet or moon. More than 90 ...

, and

quartzite Quartzite is a hard, non- foliated metamorphic rock which was originally pure quartz sandstone.Essentials of Geology, 3rd Edition, Stephen Marshak, p 182 Sandstone is converted into quartzite through heating and pressure usually related to tec ...

via a process known as

lithic reduction In archaeology, in particular of the Stone Age, lithic reduction is the process of fashioning stones or rocks from their natural state into tools or weapons by removing some parts. It has been intensely studied and many archaeological industrie ...

. One simple form of reduction is to strike stone

flake Flake or Flakes may refer to: People * Floyd H. Flake (born 1945), A.M.E. minister, university administrator, former U.S. representative * Jeff Flake (born 1962), American politician * Christian "Flake" Lorenz, German musician and member of ...

s from a nucleus (core) of material using a

hammerstone In archaeology, a hammerstone is a hard cobble used to strike off lithic flakes from a lump of tool stone during the process of lithic reduction. The hammerstone is a rather universal stone tool which appeared early in most regions of the wo ...

or similar hard hammer fabricator. If the goal of the reduction strategy is to produce flakes, the remnant

lithic core In archaeology, a lithic core is a distinctive artifact that results from the practice of lithic reduction. In this sense, a core is the scarred nucleus resulting from the detachment of one or more flakes from a lump of source material or too ...

may be discarded once it has become too small to use. In some strategies, however, a

reduces the core to a rough unifacial, or

bifacial A hand axe (or handaxe or Acheulean hand axe) is a prehistoric stone tool with two faces that is the longest-used tool in human history, yet there is no academic consensus on what they were used for. It is made from stone, usually flint or ch ...

preform, which is further reduced using soft hammer flaking techniques or by

pressure flaking In archaeology, in particular of the Stone Age, lithic reduction is the process of fashioning stones or rocks from their natural state into tools or weapons by removing some parts. It has been intensely studied and many archaeological industri ...

the edges. More complex forms of reduction include the production of highly standardized blades, which can then be fashioned into a variety of tools such as scrapers,

knives A knife ( : knives; from Old Norse 'knife, dirk') is a tool or weapon with a cutting edge or blade, usually attached to a handle or hilt. One of the earliest tools used by humanity, knives appeared at least 2.5 million years ago, as evidenced ...

sickle A sickle, bagging hook, reaping-hook or grasshook is a single-handed agricultural tool designed with variously curved blades and typically used for harvesting, or reaping, grain crops or cutting Succulent plant, succulent forage chiefly for feed ...

s, and

microliths A microlith is a small stone tool usually made of flint or chert and typically a centimetre or so in length and half a centimetre wide. They were made by humans from around 35,000 to 3,000 years ago, across Europe, Africa, Asia and Australia. Th ...

. In general terms, Knapped stone tools are nearly ubiquitous in all pre-metal-using societies because they are easily manufactured, the

tool stone A tool is an object that can extend an individual's ability to modify features of the surrounding environment or help them accomplish a particular task. Although many animals use simple tools, only human beings, whose use of stone tools dates bac ...

is usually plentiful, and they are easy to transport and sharpen.

Evolution

Archaeologists classify stone tools into industries (also known as complexes or technocomplexes) that share distinctive technological or morphological characteristics. In 1969 in the 2nd edition of ''World Prehistory'',

Grahame Clark Sir John Grahame Douglas Clark (28 July 1907 – 12 September 1995), who often published as J. G. D. Clark, was a British archaeologist who specialised in the study of Mesolithic Europe and palaeoeconomics. He spent most of his career working at ...

proposed an evolutionary progression of

flint-knapping Knapping is the shaping of flint, chert, obsidian, or other conchoidal fracturing stone through the process of lithic reduction to manufacture stone tools, strikers for flintlock firearms, or to produce flat-faced stones for building or facing w ...

in which the "dominant lithic technologies" occurred in a fixed sequence from Mode 1 through Mode 5. He assigned to them relative dates: Modes 1 and 2 to the Lower

Palaeolithic The Paleolithic or Palaeolithic (), also called the Old Stone Age (from Greek: παλαιός ''palaios'', "old" and λίθος '' lithos'', "stone"), is a period in human prehistory that is distinguished by the original development of stone to ...

, 3 to the

Middle Palaeolithic The Middle Paleolithic (or Middle Palaeolithic) is the second subdivision of the Paleolithic or Old Stone Age as it is understood in Europe, Africa and Asia. The term Middle Stone Age is used as an equivalent or a synonym for the Middle Pale ...

, 4 to the

Upper Paleolithic The Upper Paleolithic (or Upper Palaeolithic) is the third and last subdivision of the Paleolithic or Old Stone Age. Very broadly, it dates to between 50,000 and 12,000 years ago (the beginning of the Holocene), according to some theories coin ...

, and 5 to the Mesolithic, though there were other lithic technologies outside these Modes. Each region had its own timeline for the succession of the Modes: for example, Mode 1 was in use in Europe long after it had been replaced by Mode 2 in Africa. Clark's scheme was adopted enthusiastically by the archaeological community. One of its advantages was the simplicity of terminology; for example, the Mode 1 / Mode 2 Transition. The transitions are currently of greatest interest. Consequently, in the literature the stone tools used in the period of the

are divided into four "modes", each of which designates a different form of complexity, and which in most cases followed a rough

chronological Chronology (from Latin ''chronologia'', from Ancient Greek , ''chrónos'', "time"; and , '' -logia'') is the science of arranging events in their order of occurrence in time. Consider, for example, the use of a timeline or sequence of events. ...

order.

Pre-Mode I

;Kenya Stone tools found from 2011 to 2014 at the

Lomekwi Lomekwi 3 is the name of an archaeological site in Kenya where ancient stone tools have been discovered dating to 3.3 million years ago, which make them the oldest ever found. Discovery In July 2011, a team of archeologists led by Sonia Harma ...

archeology site near Lake Turkana in Kenya, are dated to be 3.3 million years old, and predate the genus ''Homo'' by about one million years. The oldest known ''Homo'' fossil is about 2.4-2.3 million years old compared to the 3.3 million year old stone tools. The stone tools may have been made by ''

Australopithecus afarensis ''Australopithecus afarensis'' is an extinct species of australopithecine which lived from about 3.9–2.9 million years ago (mya) in the Pliocene of East Africa. The first fossils were discovered in the 1930s, but major fossil finds would not ...

'', the species whose best fossil example is

Lucy Lucy is an English feminine given name derived from the Latin masculine given name Lucius with the meaning ''as of light'' (''born at dawn or daylight'', maybe also ''shiny'', or ''of light complexion''). Alternative spellings are Luci, Luce, Lu ...

, which inhabited East Africa at the same time as the date of the oldest stone tools, a yet unidentified species, or by ''Kenyanthropus platyops'' (a 3.2 to 3.5-million-year-old

Pliocene The Pliocene ( ; also Pleiocene) is the epoch in the geologic time scale that extends from 5.333 million to 2.58 Dating of the tools was by dating volcanic ash layers in which the tools were found and dating the magnetic signature (pointing north or south due to reversal of the magnetic poles) of the rock at the site. ;Ethiopia Grooved, cut and fractured animal bone fossils, made by using stone tools, were found in

Dikika The Dikika is an area of the Afar Region of Ethiopia where the hominin fossil named Selam was found (a specimen of the '' Australopithecus afarensis'' species). Dikika is located in Mille woreda.Based on the map of the findsite printed in Alemse ...

Ethiopia Ethiopia, , om, Itiyoophiyaa, so, Itoobiya, ti, ኢትዮጵያ, Ítiyop'iya, aa, Itiyoppiya officially the Federal Democratic Republic of Ethiopia, is a landlocked country in the Horn of Africa. It shares borders with Eritrea to the ...

near (200 yards) the remains of Selam, a young ''

'' girl who lived about 3.3 million years ago.

Mode I: The Oldowan Industry

The earliest stone tools in the life span of the genus ''

Homo ''Homo'' () is the genus that emerged in the (otherwise extinct) genus '' Australopithecus'' that encompasses the extant species ''Homo sapiens'' ( modern humans), plus several extinct species classified as either ancestral to or closely relat ...

'' are Mode 1 tools, and come from what has been termed the

Oldowan Industry The Oldowan (or Mode I) was a widespread stone tool archaeological industry (style) in prehistory. These early tools were simple, usually made with one or a few flakes chipped off with another stone. Oldowan tools were used during the Lowe ...

, named after the type of site (many sites, actually) found in

Olduvai Gorge The Olduvai Gorge or Oldupai Gorge in Tanzania is one of the most important paleoanthropological localities in the world; the many sites exposed by the gorge have proven invaluable in furthering understanding of early human evolution. A steep-si ...

Tanzania Tanzania (; ), officially the United Republic of Tanzania ( sw, Jamhuri ya Muungano wa Tanzania), is a country in East Africa within the African Great Lakes region. It borders Uganda to the north; Kenya to the northeast; Comoro Islands ...

, where they were discovered in large quantities. Oldowan tools were characterised by their simple construction, predominantly using

core Core or cores may refer to: Science and technology * Core (anatomy), everything except the appendages * Core (manufacturing), used in casting and molding * Core (optical fiber), the signal-carrying portion of an optical fiber * Core, the centra ...

forms. These cores were river pebbles, or rocks similar to them, that had been struck by a spherical

to cause conchoidal fractures removing flakes from one surface, creating an edge and often a sharp tip. The blunt end is the proximal surface; the sharp, the distal. Oldowan is a percussion technology. Grasping the proximal surface, the hominid brought the distal surface down hard on an object he wished to detach or shatter, such as a bone or tuber. The earliest known Oldowan tools yet found date from 2.6 million years ago, during the

Lower Palaeolithic The Lower Paleolithic (or Lower Palaeolithic) is the earliest subdivision of the Paleolithic or Old Stone Age. It spans the time from around 3 million years ago when the first evidence for stone tool production and use by hominins appears ...

period, and have been uncovered at Gona in Ethiopia. After this date, the Oldowan Industry subsequently spread throughout much of Africa, although archaeologists are currently unsure which

Hominan The Hominini form a taxonomic tribe of the subfamily Homininae ("hominines"). Hominini includes the extant genera ''Homo'' (humans) and '' Pan'' (chimpanzees and bonobos) and in standard usage excludes the genus ''Gorilla'' (gorillas). The ...

species first developed them, with some speculating that it was ''

Australopithecus garhi ''Australopithecus garhi'' is a species of australopithecine from the Bouri Formation in the Afar Region of Ethiopia 2.6–2.5 million years ago (mya) during the Early Pleistocene. The first remains were described in 1999 based on several skele ...

'', and others believing that it was in fact '' Homo habilis''. ''Homo habilis'' was the hominin who used the tools for most of the Oldowan in Africa, but at about 1.9-1.8 million years ago Homo erectus inherited them. The Industry flourished in southern and eastern Africa between 2.6 and 1.7 million years ago, but was also spread out of Africa and into

Eurasia Eurasia (, ) is the largest continental area on Earth, comprising all of Europe and Asia. Primarily in the Northern and Eastern Hemispheres, it spans from the British Isles and the Iberian Peninsula in the west to the Japanese archipelago ...

by travelling bands of ''H. erectus'', who took it as far east as

Java Java (; id, Jawa, ; jv, ꦗꦮ; su, ) is one of the Greater Sunda Islands in Indonesia. It is bordered by the Indian Ocean to the south and the Java Sea to the north. With a population of 151.6 million people, Java is the world's mos ...

by 1.8 million years ago and Northern China by 1.6 million years ago.

Mode II: The Acheulean Industry

Biface (trihedral) Amar Merdeg, Mehran, Ilam, Lower Paleolithic, National Museum of Iran

Eventually, more complex Mode 2 tools began to be developed through the Acheulean Industry, named after the site of

Saint-Acheul Saint-Acheul is a commune in the Somme department in Hauts-de-France in northern France. It is not to be confused with Saint-Acheul, a suburb of Amiens after which the Acheulean archaeological culture of the Lower Paleolithic is named. Geog ...

in France. The Acheulean was characterised not by the core, but by the

biface A hand axe (or handaxe or Acheulean hand axe) is a prehistoric stone tool with two faces that is the longest-used tool in human history, yet there is no academic consensus on what they were used for. It is made from stone, usually flint or ch ...

, the most notable form of which was the

. The Acheulean first appears in the archaeological record as early as 1.7 million years ago in the West Turkana area of

Kenya ) , national_anthem = " Ee Mungu Nguvu Yetu"() , image_map = , map_caption = , image_map2 = , capital = Nairobi , coordinates = , largest_city = Nairobi ...

and contemporaneously in southern Africa. The Leakeys, excavators at Olduvai, defined a "Developed Oldowan" Period in which they believed they saw evidence of an overlap in Oldowan and Acheulean. In their species-specific view of the two industries, Oldowan equated to ''H. habilis'' and Acheulean to ''H. erectus''. Developed Oldowan was assigned to ''habilis'' and Acheulean to ''erectus''. Subsequent dates on ''H. erectus'' pushed the fossils back to well before Acheulean tools; that is, ''H. erectus'' must have initially used Mode 1. There was no reason to think, therefore, that Developed Oldowan had to be ''habilis''; it could have been ''erectus''. Opponents of the view divide Developed Oldowan between Oldowan and Acheulean. There is no question, however, that ''habilis'' and ''erectus'' coexisted, as ''habilis'' fossils are found as late as 1.4 million years ago. Meanwhile, African ''H. erectus'' developed Mode 2. In any case a wave of Mode 2 then spread across Eurasia, resulting in use of both there. ''H. erectus'' may not have been the only hominin to leave Africa; European fossils are sometimes associated with ''

Homo ergaster ''Homo ergaster'' is an extinct species or subspecies of archaic humans who lived in Africa in the Early Pleistocene. Whether ''H. ergaster'' constitutes a species of its own or should be subsumed into '' H. erectus'' is an ongoing and unresol ...

'', a contemporary of ''H. erectus'' in Africa. In contrast to an Oldowan tool, which is the result of a fortuitous and probably

ex tempore ''Ex tempore'' (Latin for "out of the moment“) is a legal term that means 'at the time'. A judge who hands down a decision in a case soon or straight after hearing it is delivering a decision ''ex tempore''. Another way a judge may deliver a de ...

operation to obtain one sharp edge on a stone, an Acheulean tool is a planned result of a manufacturing process. The manufacturer begins with a blank, either a larger stone or a slab knocked off a larger rock. From this blank he or she removes large flakes, to be used as cores. Standing a core on edge on an anvil stone, he or she hits the exposed edge with centripetal blows of a hard hammer to roughly shape the implement. Then the piece must be worked over again, or retouched, with a soft hammer of wood or bone to produce a tool finely Knapped all over consisting of two convex surfaces intersecting in a sharp edge. Such a tool is used for slicing; concussion would destroy the edge and cut the hand. Some Mode 2 tools are disk-shaped, others ovoid, others leaf-shaped and pointed, and others elongated and pointed at the distal end, with a blunt surface at the proximal end, obviously used for drilling. Mode 2 tools are used for butchering; not being composite (having no haft) they are not very appropriate killing instruments. The killing must have been done some other way. Mode 2 tools are larger than Oldowan. The blank was ported to serve as an ongoing source of flakes until it was finally retouched as a finished tool itself. Edges were often sharpened by further retouching.

Mode III: The Mousterian Industry

Eventually, the Acheulean in Europe was replaced by a lithic technology known as the

Mousterian Industry The Mousterian (or Mode III) is an archaeological industry of stone tools, associated primarily with the Neanderthals in Europe, and to the earliest anatomically modern humans in North Africa and West Asia. The Mousterian largely defines the lat ...

, which was named after the site of

Le Moustier Le Moustier is an archeological site consisting of two rock shelters in Peyzac-le-Moustier, a village in the Dordogne, France. It is known for a complete skeleton of the species ''Homo neanderthalensis'' that was discovered in 1908. The Mouste ...

in France, where examples were first uncovered in the 1860s. Evolving from the Acheulean, it adopted the

Levallois technique The Levallois technique () is a name given by archaeologists to a distinctive type of stone knapping developed around 250,000 to 300,000 years ago during the Middle Palaeolithic period. It is part of the Mousterian stone tool industry, and was ...

to produce smaller and sharper knife-like tools as well as scrapers. Also known as the "prepared core technique", flakes are struck from worked cores and then subsequently retouched. The Mousterian Industry was developed and used primarily by the Neanderthals, a native European and Middle Eastern hominin species, but a broadly similar industry is contemporaneously widespread in Africa. Middle Paleolithic stone tool known as Mousterian point discovered in the Darai Rockshelter in the Sirwan valley of Hawraman, Zagros

Middle Paleolithic stone tool known as Mousterian point discovered in the Darai Rockshelter in the Sirwan valley of Hawraman, Zagros

Mode IV: The Aurignacian Industry

The widespread use of long

blade A blade is the portion of a tool, weapon, or machine with an edge that is designed to puncture, chop, slice or scrape surfaces or materials. Blades are typically made from materials that are harder than those they are to be used on. Histor ...

s (rather than flakes) of the

Upper Palaeolithic The Upper Paleolithic (or Upper Palaeolithic) is the third and last subdivision of the Paleolithic or Old Stone Age. Very broadly, it dates to between 50,000 and 12,000 years ago (the beginning of the Holocene), according to some theories coin ...

Mode 4 industries appeared during the

between 50,000 and 10,000 years ago, although blades were produced in small quantities much earlier by Neanderthals. The Aurignacian culture seems to have been the first to rely largely on blades. The use of blades exponentially increases the efficiency of core usage compared to the Levallois flake technique, which had a similar advantage over Acheulean technology which was worked from cores.

Mode V: The Microlithic Industries

Mode 5 stone tools involve the production of

microlith A microlith is a small stone tool usually made of flint or chert and typically a centimetre or so in length and half a centimetre wide. They were made by humans from around 35,000 to 3,000 years ago, across Europe, Africa, Asia and Australia. Th ...

s, which were used in composite tools, mainly fastened to a shaft. Examples include the Magdalenian culture. Such a technology makes much more efficient use of available materials like flint, although required greater skill in manufacturing the small flakes. Mounting sharp flint edges in a wood or bone handle is the key innovation in microliths, essentially because the handle gives the user protection against the flint and also improves leverage of the device.

Neolithic industries

HMB Steinaxtmanufaktur Vinelz Jungsteinzeit 2700 BC

In prehistoric Japan, ground stone tools appear during the Japanese Paleolithic period, that lasted from around 40,000 BC to 14,000 BC. Elsewhere, ground stone tools became important during the

Neolithic The Neolithic period, or New Stone Age, is an Old World archaeological period and the final division of the Stone Age. It saw the Neolithic Revolution, a wide-ranging set of developments that appear to have arisen independently in several p ...

period beginning about 10,000 BC. These ground or polished implements are manufactured from larger-grained materials such as

, jade and jadeite, greenstone and some forms of rhyolite which are not suitable for flaking. The greenstone industry was important in the English Lake District, and is known as the

Langdale axe industry The Langdale axe industry (or factory) is the name given by archaeologists to a Neolithic centre of specialised stone tool production in the Great Langdale area of the English Lake District. (For accompanying material seSupplement 1of same vo ...

. Ground stone implements included

adze An adze (; alternative spelling: adz) is an ancient and versatile cutting tool similar to an axe but with the cutting edge perpendicular to the handle rather than parallel. Adzes have been used since the Stone Age. They are used for smoothing ...

s, celts, and

axe An axe ( sometimes ax in American English; see spelling differences) is an implement that has been used for millennia to shape, split and cut wood, to harvest timber, as a weapon, and as a ceremonial or heraldic symbol. The axe has ma ...

s, which were manufactured using a labour-intensive, time-consuming method of repeated grinding against an abrasive stone, often using water as a lubricant. Because of their coarse surfaces, some ground stone tools were used for grinding plant foods and were polished not just by intentional shaping, but also by use. Manos are hand stones used in conjunction with

metate A metate (or mealing stone) is a type or variety of quern, a ground stone tool used for processing grain and seeds. In traditional Mesoamerican cultures, metates are typically used by women who would grind nixtamalized maize and other organic ...

s for grinding corn or grain. Polishing increased the intrinsic

mechanical strength The field of strength of materials, also called mechanics of materials, typically refers to various methods of calculating the stresses and strains in structural members, such as beams, columns, and shafts. The methods employed to predict the re ...

of the axe. Polished stone axes were important for the widespread clearance of woods and forest during the Neolithic period, when crop and livestock farming developed on a large scale. They are distributed very widely and were traded over great distances since the best rock types were often very local. They also became venerated objects, and were frequently buried in

long barrow Long barrows are a style of monument constructed across Western Europe in the fifth and fourth millennia BCE, during the Early Neolithic period. Typically constructed from earth and either timber or stone, those using the latter material repre ...

s or round barrows with their former owners. During the

period, large axes were made from flint nodules by knapping a rough shape, a so-called "rough-out". Such products were traded across a wide area. The rough-outs were then polished to give the surface a fine finish to create the axe head. Polishing not only increased the final strength of the product but also meant that the head could penetrate wood more easily. Mar Dalan-Rawansar-Kermanshah

There were many sources of supply, including

Grimes Graves Grime's Graves is a large Neolithic flint mining complex in Norfolk, England. It lies north east from Brandon, Suffolk in the East of England. It was worked between 2600 and 2300 BC, although production may have continued well into ...

in Suffolk,

Cissbury Cissbury Ring is an biological Site of Special Scientific Interest north of Worthing in West Sussex. It is owned by the National Trust and is designated a Scheduled monument for its Neolithic flint mine and Iron Age hillfort. Cissbury R ...

in Sussex and

Spiennes Spiennes ( wa, Spiene) is a town of Wallonia and a district of the municipality of Mons, located in the province of Hainaut, Belgium. It was a municipality until the fusion of the Belgian municipalities in 1977. Heritage The locality is well ...

near Mons in Belgium to mention but a few. In

Britain Britain most often refers to: * The United Kingdom, a sovereign state in Europe comprising the island of Great Britain, the north-eastern part of the island of Ireland and many smaller islands * Great Britain, the largest island in the United King ...

, there were numerous small quarries in

downland Downland, chalkland, chalk downs or just downs are areas of open chalk hills, such as the North Downs. This term is used to describe the characteristic landscape in southern England where chalk is exposed at the surface. The name "downs" is deriv ...

areas where flint was removed for local use, for example. Many other rocks were used to make axes from stones, including the

as well as numerous other sites such as

Penmaenmawr Penmaenmawr (, ) is a town and community in Conwy County Borough, Wales, which was formerly in the parish of Dwygyfylchi and the traditional county of Caernarfonshire. It is on the North Wales coast between Conwy and Llanfairfechan and was a ...

and Tievebulliagh in Co Antrim,

Ulster Ulster (; ga, Ulaidh or ''Cúige Uladh'' ; sco, label= Ulster Scots, Ulstèr or ''Ulster'') is one of the four traditional Irish provinces. It is made up of nine counties: six of these constitute Northern Ireland (a part of the United Kin ...

. In Langdale, there many

outcrop An outcrop or rocky outcrop is a visible exposure of bedrock or ancient superficial deposits on the surface of the Earth. Features Outcrops do not cover the majority of the Earth's land surface because in most places the bedrock or superficia ...

s of the greenstone were exploited, and knapped where the stone was extracted. The sites exhibit piles of waste flakes, as well as rejected rough-outs. Polishing improved the

of the tools, so increasing their life and effectiveness. Many other tools were developed using the same techniques. Such products were traded across the country and abroad.

Aboriginal Australian use

Stone axes from 35,000 years ago are the earliest known use of a stone tool in Australia. Other stone tools varied in type and use among various

Aboriginal Australian Aboriginal Australians are the various Indigenous peoples of the Australian mainland and many of its islands, such as Tasmania, Fraser Island, Hinchinbrook Island, the Tiwi Islands, and Groote Eylandt, but excluding the Torres Strait Isl ...

peoples, dependent on geographical regions and the type and structure of the tools varied among the different cultural and linguistic groups. The locations of the various artefacts, as well as whole geologic features, demarcated territorial and cultural boundaries of various linguistic and cultural groups' lands. They developed trade networks, and showed sophistication in working many different types of stone for many different uses, including as tools, food utensils and weapons, and modified their stone tools over the millennia to adapt to changing environments.

Oral traditions Oral tradition, or oral lore, is a form of human communication wherein knowledge, art, ideas and cultural material is received, preserved, and transmitted orally from one generation to another. Vansina, Jan: ''Oral Tradition as History'' (1985) ...

carried the skills down through the ages. Complex stone tools were used by the

Gunditjmara The Gunditjmara or Gunditjamara, also known as Dhauwurd Wurrung, are an Aboriginal Australian people of southwestern Victoria. They are the traditional owners of the areas now encompassing Warrnambool, Port Fairy, Woolsthorpe and Portland. Th ...

of western

Victoria Victoria most commonly refers to: * Victoria (Australia), a state of the Commonwealth of Australia * Victoria, British Columbia, provincial capital of British Columbia, Canada * Victoria (mythology), Roman goddess of Victory * Victoria, Seychelle ...

until relatively recently. Many examples are now held in museums. Flaked stone tools were made by extracting a sharp fragment of stone from a larger piece, called a core, by hitting it with a "hammerstone". Both the flakes and the hammerstones could be used as tools. The best types of stone for these tools are hard, brittle stones, rich in

silica Silicon dioxide, also known as silica, is an oxide of silicon with the chemical formula , most commonly found in nature as quartz and in various living organisms. In many parts of the world, silica is the major constituent of sand. Silica is ...

, such as

, flint,

silcrete Silcrete is an indurated (resists crumbling or powdering) soil duricrust formed when surface soil, sand, and gravel are cemented by dissolved silica. The formation of silcrete is similar to that of calcrete, formed by calcium carbonate, and ferr ...

and

quartz Quartz is a hard, crystalline mineral composed of silica ( silicon dioxide). The atoms are linked in a continuous framework of SiO4 silicon-oxygen tetrahedra, with each oxygen being shared between two tetrahedra, giving an overall chemical ...

(the latter particularly in the

Kimberleys The Kimberley is the northernmost of the nine regions of Western Australia. It is bordered on the west by the Indian Ocean, on the north by the Timor Sea, on the south by the Great Sandy and Tanami deserts in the region of the Pilbara, an ...

Western Australia Western Australia (commonly abbreviated as WA) is a state of Australia occupying the western percent of the land area of Australia excluding external territories. It is bounded by the Indian Ocean to the north and west, the Southern Ocean to th ...

). These were quarried from bedrock or collected as pebbles from watercourses and beaches, and often carried for long distances. The flake could be used immediately for cutting or scraping, but were sometimes modified in a process called reduction to sharpen or resharpen the flake. Across northern Australia, especially in Arnhem Land, the "Leilira blade", a rectangular stone flake shaped by striking quartzite or silcrete stone, was used as a spear tip and also as a knife, sometimes long. Tasmania did not have spears or stone axes, but the peoples there used tools which were adapted to the climate and environment, such as the use of spongolite. In north-western Australia, "Kimberley point", a small triangular stone point, was created using

kangaroo Kangaroos are four marsupials from the family Macropodidae (macropods, meaning "large foot"). In common use the term is used to describe the largest species from this family, the red kangaroo, as well as the antilopine kangaroo, eastern ...

bone which had been shaped with stone into an awl, to make small

serration Serration is a saw-like appearance or a row of sharp or tooth-like projections. A serrated cutting edge has many small points of contact with the material being cut. By having less contact area than a smooth blade or other edge, the applied p ...

s in the blade. Apart from being used as weapons and for cutting, grinding (

grindstone A grindstone, also known as grinding stone, is a sharpening stone used for grinding or sharpening ferrous tools, used since ancient times. Tools are sharpened by the stone's abrasive qualities that remove material from the tool through friction ...

s), piercing and pounding, some stones, notable ochres, were used as

pigment A pigment is a colored material that is completely or nearly insoluble in water. In contrast, dyes are typically soluble, at least at some stage in their use. Generally dyes are often organic compounds whereas pigments are often inorganic compou ...

for painting.

Modern uses

Stone tools are still one of the most successful technologies used by humans. The invention of the

flintlock Flintlock is a general term for any firearm that uses a flint-striking ignition mechanism, the first of which appeared in Western Europe in the early 16th century. The term may also apply to a particular form of the mechanism itself, also know ...

gun mechanism in the sixteenth century produced a demand for specially shaped gunflints. The gunflint industry survived until the middle of the twentieth century in some places, including in the English town of

Brandon Brandon may refer to: Names and people *Brandon (given name), a male given name *Brandon (surname), a surname with several different origins Places Australia *Brandon, a farm and 19th century homestead in Seaham, New South Wales *Brandon, Q ...

Threshing board A threshing board, also known as threshing sledge, is an obsolete agricultural implement used to separate cereals from their straw; that is, to thresh. It is a thick board, made with a variety of slats, with a shape between rectangular and trape ...

s with lithic flakes are used in agriculture from Neolithic, and are still used today in the regions where agriculture has not been mechanized and industrialized. Glassy stones (flint, quartz,

jasper Jasper, an aggregate of microgranular quartz and/or cryptocrystalline chalcedony and other mineral phases,Kostov, R. I. 2010. Review on the mineralogical systematics of jasper and related rocks. – Archaeometry Workshop, 7, 3, 209-213PDF/ref> ...

agate Agate () is a common rock formation, consisting of chalcedony and quartz as its primary components, with a wide variety of colors. Agates are primarily formed within volcanic and metamorphic rocks. The ornamental use of agate was common in Anci ...

) were used with a variety of

iron pyrite The mineral pyrite (), or iron pyrite, also known as fool's gold, is an iron sulfide with the chemical formula Fe S2 (iron (II) disulfide). Pyrite is the most abundant sulfide mineral. Pyrite's metallic luster and pale brass-yellow hue giv ...

marcasite The mineral marcasite, sometimes called “white iron pyrite”, is iron sulfide (FeS2) with orthorhombic crystal structure. It is physically and crystallographically distinct from pyrite, which is iron sulfide with cubic crystal structure. Both ...

stones as percussion fire starter tools. That was the most common method of producing fire in pre-industrial societies. Stones were later superseded by use of steel,

ferrocerium Ferrocerium (also known in Europe as Auermetall) is a synthetic pyrophoric alloy of mischmetal (cerium, lanthanum, neodymium, other trace lanthanides and some iron – about 95% lanthanides and 5% iron) hardened by blending in oxides o ...

and matches. For specialist purposes glass knives are still made and used today, particularly for cutting

thin section In optical mineralogy and petrography, a thin section (or petrographic thin section) is a thin slice of a rock or mineral sample, prepared in a laboratory, for use with a polarizing petrographic microscope, electron microscope and electron ...

s for electron microscopy in a technique known as microtomy. Freshly cut blades are always used since the sharpness of the edge is very great. These knives are made from high-quality manufactured glass, however, not from natural raw materials such as chert or obsidian. Surgical knives made from obsidian are still used in some delicate surgeries, as they cause less damage to tissues than surgical knives and the resulting wounds heal more quickly. In 1975, American archaeologist Don Crabtree manufactured obsidian scalpels which were used for surgery on his own body.

Tool stone

In archaeology, a

is a type of stone that is used to manufacture stone tools.

References

External links

* * * * * * * * * * * * * {{DEFAULTSORT:Stone Tool Tools Archaeological artefact types Primitive technology Stone objects