An amphora (; grc, wikt:ἀμφορεύς, ἀμφορεύς, ''amphoreús''; English plural: amphorae or amphoras) is a type of container with a pointed bottom and characteristic shape and size which fit tightly (and therefore safely) against each other in storage rooms and packages, tied together with rope and delivered by land or sea. The size and shape have been determined from at least as early as the Neolithic Period. Amphorae were used in vast numbers for the transport and storage of various products, both liquid and dry, but mostly for wine. They are most often ceramic, but examples in metals and other materials have been found. Versions of the amphorae were one of many shapes used in Ancient Greek vase painting. The amphora complements a vase, the pithos, which makes available capacities between one-half and two and one-half tons. In contrast, the amphora holds under a half-ton, typically less than . The bodies of the two types have similar shapes. Where the pithos may have multiple small loops or lugs for fastening a rope harness, the amphora has two expansive package handle, handles joining the shoulder of the body and a long neck. The necks of pithoi are wide for scooping or bucket access. The necks of amphorae are narrow for pouring by a person holding it by the bottom and a handle. Some variants exist. The handles might not be present. The size may require two or three handlers to lift. For the most part, however, an amphora was tableware, or sat close to the table, was intended to be seen, and was finely decorated as such by master painters. Stoppers of perishable materials, which have rarely survived, were used to seal the contents. Two principal types of amphorae existed: the ''neck amphora'', in which the neck and body meet at a sharp angle; and the ''one-piece amphora'', in which the neck and body form a continuous curve upwards. Neck amphorae were commonly used in the early history of ancient Greece, but were gradually replaced by the one-piece type from around the 7th century BC onward. Most were produced with a pointed base to allow upright storage by embedding in soft ground, such as sand. The base facilitated transport by ship, where the amphorae were packed upright or on their sides in as many as five staggered layers. If upright, the bases probably were held by some sort of rack, and ropes passed through their handles to prevent shifting or toppling during rough seas. Heather and reeds might be used as packing around the vases. Racks could be used in kitchens and shops. The base also concentrated deposits from liquids with suspended solid particles, such as olive oil and wines. Amphorae are of great use to Maritime archaeology, maritime archaeologists, as they often indicate the age of a shipwreck and the geographic origin of the cargo. They are occasionally so well preserved that the original content is still present, providing information on foodstuffs and mercantile systems. Amphorae were too cheap and plentiful to return to their origin-point and so, when empty, they were broken up at their destination. At a breakage site in Rome, Testaccio, close to the Tiber, the fragments, later wetted with calcium hydroxide (calce viva), remained to create a hill now named Monte Testaccio, high and more than 1 kilometre in circumference.

Etymology

Amphora is a Greco-Roman word developed in ancient Greek during the Bronze Age. The Romans acquired it during the Hellenization that occurred in the Roman Republic. Cato the Younger, Cato is the first known literary person to use it. The Romans turned the Greek form into a standard -a declension noun, ''amphora'', pl. ''amphorae''. Undoubtedly, the word and the vase were introduced to Italy through the Greek settlements there, which traded extensively in Greek pottery. It is remarkable that even though the Etruscan civilization, Etruscans imported, manufactured, and exported amphorae extensively in their wine industry, and other Greek vase names were Etruscanized, no Etruscan form of the word exists. There was perhaps an as yet unidentified native Etruscan word for the vase that pre-empted the adoption of ''amphora''. The Latin word derived from the Greek language, Greek ''amphoreus'' (), a shortened form of ''amphiphoreus'' (), a compound word combining ''amphi-'' ("on both sides", "twain") and ''phoreus'' ("carrier"), from ''pherein'' ("to carry"), referring to the vessel's two carrying handles on opposite sides. The amphora appears as , ''a-pi-po-re-we'', in the Linear B Bronze Age records of Knossos, , ''a-po-re-we'', at Mycenae, and the fragmentary '']-re-we'' at Pylos, designated by , Emmett L. Bennett Jr., Bennett's AMPHORA, which has a number of scribal variants. The two spellings are transcriptions of amphiphorēwes (plural) and amphorēwe (dual) in Mycenaean Greek from which it may be seen that the short form prevailed on the mainland. Homer uses the long form for metrical reasons, and Herodotus has the short form. Ventris and Chadwick's translation is "carried on both sides."

Weights and measures

Amphorae varied greatly in height. The largest stands as tall as 1.5 metres (5 ft) high, while some were less than 30 centimetres (12 in) high - the smallest were called amphoriskoi (literally "little amphorae"). Most were around 45 centimetres (18 in) high. There was a significant degree of standardisation in some variants; the wine amphora held a standard measure of about 39 litres (41 US qt), giving rise to the amphora quadrantal as a unit of measure in the Roman Empire. In all, approximately 66 distinct types of amphora have been identified. Further, the term also stands for an ancient Ancient Roman units of measurement, Roman unit of measurement for liquids. The volume of a Roman amphora was one cubic Foot (length), foot, c. 26.026 Litre, L.

Production

Roman amphorae were Potter's wheel, wheel-thrown terracotta containers. During the production process the body was made first and then left to dry partially. Then coils of clay were added to form the neck, the rim, and the handles. Once the amphora was complete, the maker then treated the interior with resin that would prevent permeation of stored liquids. The reconstruction of these stages of production is based primarily on the study of modern amphora production in some areas of the eastern Mediterranean. Amphorae often were marked with a variety of stamps, sgraffito, and inscriptions. They provided information on the production, content, and subsequent marketing. A stamp usually was applied to the amphora at a partially dry stage. It indicates the name of the ''figlina'' (workshop) and/or the name of the owner of the workshop. Painted stamps, ''tituli picti'', recorded the weight of the container and the contents, and were applied after the amphora was filled. Today, stamps are used to allow historians to track the flow of trade goods and recreate ancient trade networks.

Classification

The first systematic classification of Roman amphorae types was undertaken by the German scholar Heinrich Dressel. Following the exceptional amphora deposit uncovered in Rome in Castro Pretorio at the end of the 1800s, he collected almost 200 inscriptions from amphorae and included them in the ''Corpus Inscriptionum Latinarum''. In his studies of the amphora deposit he was the first to elaborate a classification of types, the so-called "Dressel table", which still is used today for many types. Subsequent studies on Roman amphorae have produced more detailed classifications, which usually are named after the scholar who studied them. For the neo-Phoenician types see the work by Maña published in 1951, and the revised classification by Van der Werff in 1977–1978. The Gallic amphorae have been studied by Laubenheimer in a study published in 1989, whereas the Cretan amphorae have been analyzed by Marangou-Lerat. Beltràn studied the Spanish types in 1970. Adriatic types have been studied by Lamboglia in 1955. For a general analysis of the Western Mediterranean types see Panella, and Peacock and Williams.

History

Prehistoric origins

Ceramics of shapes and uses falling within the range of amphorae, with or without handles, are of prehistoric heritage across Eurasia, from the Caucasus to China. For example, the kvevri, common in the Republic of Georgia and the Caucasus, may be traced back to approximately 6000 BC. Amphorae dated to approximately 4800 BC have been found in Banpo, a Neolithic site of the Yangshao culture in China. Amphorae first appeared on the Phoenician coast at approximately 3500 BC. In the Bronze and Iron Ages amphorae spread around the ancient Mediterranean Basin, Mediterranean world, being used by the Ancient Greece, ancient Greeks and Ancient Rome, Romans as the principal means for transporting and storing grapes, olive oil, wine, Vegetable oil, oil, olives, cereal, grain, fish, and other Commodity, commodities. They were produced on an industrial scale until approximately the 7th century AD. Barrel, Wooden and skin containers seem to have supplanted amphorae thereafter. They influenced Chinese ceramics and other East Asian ceramic cultures, especially as a fancy shape for high-quality decorative ceramics, and continued to be produced there long after they had ceased to be used further west.

Ancient Greece: fancy shapes for painting

Besides coarse amphorae used for storage and transport, the vast majority, high-quality painted amphorae were produced in Ancient Greece in significant numbers for a variety of social and ceremonial purposes. Their design differs vastly from the more functional versions; they are typified by wide mouth and a ring base, with a glazed surface and decorated with figures or geometric shapes. They normally have a firm base on which they can stand. Panathenaic amphora, Panathenaic amphorae were used as prizes in the Panathenaic Festivals held between the 6th century BC to the 2nd century BC, filled with olive oil from a sacred grove. Surviving examples bear the inscription "I am one of the prizes from Athens", and usually depict the particular event they were awarded for. Painted amphorae were also used for funerary purposes, often in special types such as the ''loutrophoros''. Especially in earlier periods, outsize vases were used as grave markers, while some amphorae were used as containers for the ashes of the dead. By the Roman period vase-painting had largely died out, and utilitarian amphorae were normally the only type produced.

Greek amphora types

Various different types of amphorae were popular at different times:

=Neck amphora (c. 6th–5th century BC)

= On a neck amphora, the handles are attached to the neck, which is separated from the belly by an angular carination. There are two main types of neck amphorae: * the Nolan amphora (late 5th century BC), named for its type site, Nola near Naples, and * the Tyrrhenian amphorae, Tyrrhenian amphora. There are also some rarer special types of neck amphora, distinguished by specific features, for example: * the Pointed amphora, with a notably pointed toe, sometimes ending in a knob-like protrusion * the ''Loutrophoros'', used for storing water during ritual ceremonies, such as marriages and funerals.

=Belly amphora (c. 640–450 BC)

= In contrast to the neck amphora, a belly amphora does not have a distinguished neck; instead, the belly reaches the mouth in a continuous curve. After the mid-5th century BC, this type was rarely produced. The ''pelike'' is a special type of belly amphora, with the belly placed lower, so that the widest point of the vessel is near its bottom. The ''pelike'' was introduced around the end of the 6th century BC.

=Panathenaic prize amphora

= Another special type is the Panathenaic amphora, Panathenaic prize amphora, with black-figure vase painting, black-figure decoration, produced exclusively as prize vessels for the Panathenaia and retaining the black-figure technique for centuries after the introduction of red-figure vase painting. Some examples bear the inscription "ΤΩΝ ΑΘΗΝΗΘΕΝ ΑΘΛΩΝ" meaning "[I am one] of the prizes from [the goddess] Athena". They contained the prize of oil from the sacred olive tree of the goddess Athena for the winners of the athletic contests held to honour the goddess, and were evidently kept thereafter, and perhaps used to store wine, before being buried with the prize-winner. They depicted goddess Athena on one side (as seen on the second image on this page) and the athletic event on the other side, e.g. a scene of wrestling or running contest etc. File:Terracotta Panathenaic prize amphora MET GR147.jpg, Panathenaic amphora, Panathenaic prize amphora for runners; circa 530 BC; terracotta; height: 62.2 cm (24 in.); Metropolitan Museum of Art (New York City) File:Hellenistic Glasamphora from Olbia Antikensammlung Berlin 3.jpg, Greek amphora; 2nd half of the 2nd century BC; glass; from Olbia (Corsica and Sardinia, Roman-era Sardinia); Altes Museum (Berlin)

Ancient Rome

By the Roman period utilitarian amphorae were normally the only type produced. The first type of Roman amphora, Dressel 1, appears in central Italy in the late 2nd century BC. This type had thick walls and a characteristic red fabric. It was very heavy, although also strong. Around the middle of the 1st century BC the so-called Dressel 2-4 starts to become widely used. This type of amphora presented some advantages in being lighter and with thinner walls. It has been calculated that while a ship could accommodate approximately 4500 Dressel 1, it was possible to fit 6000 Dressel 2–4 in the same space. Dressel 2-4 were often produced in the same workshops used for the production of Dressel 1 which quickly ceased to be used. At the same time in Cuma (Italy), Cuma (southern Italy) the production of the ''cadii cumani'' type starts (Dressel 21–22). These containers were mainly used for the transportation of fruit and were used until the middle imperial times. At the same time, in central Italy, the so-called Spello amphorae, small containers, were produced for the transportation of wine. On the Adriatic coast the older types were replaced by the Lamboglia 2 type, a wine amphora commonly produced between the end of the 2nd and the 1st century BC. This type develops later into the Dressel 6A which becomes dominant during Augustan times. In the Gallic provinces the first examples of Roman amphorae were local imitations of pre-existent types such as Dressel 1, Dressel 2–4, Pascual 1, and Haltern 70. The more typical Gallic production begins within the ceramic ateliers in Marseille during late Augustan times. The type Oberaden 74 was produced to such an extent that it influenced the production of some Italic types. Spanish amphorae became particularly popular thanks to a flourishing production phase in late Republican times. The ''Hispania Baetica'' and ''Hispania Tarraconensis'' regions (south-western and eastern Spain) were the main production areas between the 2nd and the 1st century BC due to the distribution of land to military veterans and the founding of new colonies. Spanish amphorae were widespread in the Mediterranean area during early imperial times. The most common types were all produced in Baetica and among these there were the Dressel 20, a typical olive oil container, the Dressel 7–13, for garum (fish sauce), and the Haltern 70, for defrutum (fruit sauce). In the Tarraconensis region the Pascual 1 was the most common type, a wine amphora shaped on the Dressel 1, and imitations of Dressel 2–4. North-African production was based on an ancient tradition which may be traced back to the Phoenician colony of Carthage. Phoenician amphorae had characteristic small handles attached directly onto the upper body. This feature becomes the distinctive mark of late-Republican/early imperial productions, which are then called neo-Phoenician. The types produced in Tripolitania and Northern Tunisia are the Maña C1 and C2, later renamed Van der Werff 1, 2, and 3. In the Aegean area the types from the island of Rhodes were quite popular starting from the 3rd century BC due to local wine production which flourished over a long period. These types developed into the ''Camulodunum'' 184, an amphora used for the transportation of Rhodian wine all over the empire. Imitations of the Dressel 2-4 were produced on the island of Cos for the transportation of wine from the 4th century BC until middle imperial times. Cretan containers also were popular for the transportation of wine and can be found around the Mediterranean from Augustan times until the 3rd century AD. During the late empire period, north-African types dominated amphora production. The so-called African I and II types were widely used from the 2nd until the late 4th century AD. Other types from the eastern Mediterranean (Gaza), such as the so-called Late Roman 4, became very popular between the 4th and the 7th century AD, while Italic productions ceased. The largest known wreck of an amphorae cargo ship, carrying 6,000 pots, was discovered off the coast of Kefalonia, an Ionian Islands, Ionian island off the coast of Greece.

Modern use

Some modern winemakers and brewers are using amphoras to provide a different palate and tastes to their products than are available with other aging methods.

Citations

General references

* . * .

External links

Amphorae ex Hispania

Bulletin amphorologique

Roman Amphorae: a digital resource
from the University of Southampton
Roman Amphoras in Britain
in Internet Archaeology {{Authority control Amphorae, Archaeological terminology Bottles Storage vessels Wine packaging and storage