Field strength in free space
   HOME

TheInfoList



OR:

Dipole field strength in free space, in telecommunications, is the electric field strength caused by a half wave dipole under ideal conditions. The actual field strength in terrestrial environments is calculated by empirical formulas based on this field strength.


Power density

Let N be the effective power radiated from an isotropic antenna and p be the power density at a distance d from this source :\mbox = \frac Power density is also defined in terms of electrical field strength; Let E be the electrical field and Z be the impedance of the free space :\mbox = \frac The following relation is obtained by equating the two, : \frac= \frac or by rearranging the terms : \mbox =\frac


Numerical values

Impedance of free space is roughly 120 \cdot \pi Since a half wave dipole is used, its Gain (electronics), gain over an isotropic dipole antenna, antenna (\mbox = 1.64 ) should also be taken into consideration, : \mbox =\frac \approx 7\cdot\frac In this equation SI units are used. Expressing the same equation in: : kW instead of W in power (physics), power, :km instead of m in distance and :mV/m instead of V/m in electric field is equivalent to multiplying the expression on the right by \sqrt. K.H.Kaltbeitzer: ''Site selection'', EBU Techhnical Monograph 3104,Bruxelles,1965, p 30 In this case, :\mbox \approx 222\cdot\frac :


See also

*Antennas *Effective radiated power *Electric field *Field strength meter *Radio propagation model


References

{{Radio frequency propagation models Telecommunication theory Antennas Broadcast engineering Radio frequency propagation model