Facing in machining can be used in two different areas: facing on a milling machine and facing on a lathe. Facing on the milling machine involves various milling operations, but primarily face milling. On the lathe, facing is commonly used in

turning Turning is a machining process in which a cutting tool, typically a non-rotary tool bit, describes a helix toolpath by moving more or less linearly while the workpiece rotates. Usually the term "turning" is reserved for the generation ...

and boring operations. Other operations remove material in ways similar to facing, for example, planing, shaping, and grinding, but these processes are not labeled by the term "facing."

Facing lathe operation

Facing on the lathe uses a facing tool to cut a flat surface perpendicular to the work piece's rotational axis. A facing tool is mounted into a tool holder that rests on the carriage of the

lathe A lathe () is a machine tool that rotates a workpiece about an axis of rotation to perform various operations such as cutting, sanding, knurling, drilling, deformation, facing, and turning, with tools that are applied to the workpiece ...

. The tool will then feed perpendicularly across the part's rotational axis as it spins in the jaws of the chuck. A user will have the option to hand feed the machine while facing, or use the power feed option. For a smoother surface, using the power feed option is optimal due to a constant feed rate. Facing will take the work piece down to its finished length very accurately. Depending on how much material needs to be taken off, a

machinist A machinist is a tradesperson or trained professional who not only operates machine tools, but also has the knowledge of tooling and materials required to create set ups on machine tools such as milling machines, grinders, lathes, and drilling ...

can choose to take roughing or finishing cuts. Factors that affect the quality and effectiveness of facing operations on the lathe are

speeds and feeds The phrase speeds and feeds or feeds and speeds refers to two separate velocities in machine tool practice, cutting speed and feed rate. They are often considered as a pair because of their combined effect on the cutting process. Each, however, ...

, material

hardness In materials science, hardness (antonym: softness) is a measure of the resistance to localized plastic deformation induced by either mechanical indentation or abrasion. In general, different materials differ in their hardness; for example hard ...

, cutter size, and how the part is being clamped down.

Face milling operation

Facing on a

milling machine Milling is the process of machining using rotary cutters to remove material by advancing a cutter into a workpiece. This may be done by varying direction on one or several axes, cutter head speed, and pressure. Milling covers a wide variety of d ...

is the process of cutting a flat surface perpendicular to the axes of the milling cutter. This process removes the material by rotating the facing tool in the counterclockwise direction as the table feeds the work piece across the cutter. Face milling can be achieved with an end mill, but is often done with a face mill,

shell mill Milling cutters are cutting tools typically used in milling machines or machining centres to perform milling operations (and occasionally in other machine tools). They remove material by their movement within the machine (e.g., a ball nose mill) ...

or a fly cutter. Face milling can be done in both manual machining and CNC machining. To obtain a smoother surface finish it is best to let the machine feed the table. Newer manual milling machines and CNC machines will have this option, but older milling machines will not. When available, use the machine feed instead of manually feeding the part. This will provide an optimal surface finish due to the constant feed maintained by the mill. Hand feeding the table will allow human error into the process.

Machinists A machinist is a tradesperson or trained professional who not only operates machine tools, but also has the knowledge of tooling and materials required to create set ups on machine tools such as milling machines, grinders, lathes, and drilling ...

also have the option to take roughing cuts and finish cuts. Factors that affect the quality and effectiveness of facing operations on the mill are

, material

, cutter size, and how the part is being clamped down. Spotfacing is the facing of spots (localized areas), such as the bearing surfaces on which bolt heads or washers will sit.

References

{{reflist Machining