EN 14214 is a standard published by the
European Committee for Standardization
The European Committee for Standardization (CEN, french: Comité Européen de Normalisation) is a public standards organization whose mission is to foster the economy of the European Single Market and the wider European continent in global t ...
that describes the requirements and test methods for FAME - the most common type of
biodiesel
Biodiesel is a form of diesel fuel derived from plants or animals and consisting of long-chain fatty acid esters. It is typically made by chemically reacting lipids such as animal fat ( tallow), soybean oil, or some other vegetable oi ...
.
The technical definition of biodiesel is a fuel suitable for use in
compression ignition
The diesel engine, named after Rudolf Diesel, is an internal combustion engine in which ignition of the fuel is caused by the elevated temperature of the air in the cylinder due to mechanical compression; thus, the diesel engine is a so-call ...
(diesel) engines that is made of fatty acid monoalkyl esters derived from biologically produced oils or fats including vegetable oils, animal fats and microalgal oils. When biodiesel is produced from these types of oil using
methanol
Methanol (also called methyl alcohol and wood spirit, amongst other names) is an organic chemical and the simplest aliphatic alcohol, with the formula C H3 O H (a methyl group linked to a hydroxyl group, often abbreviated as MeOH). It is ...
fatty acid methyl esters (FAME) are produced. Biodiesel fuels can also be produced using other alcohols, for example using ethanol to produce fatty acid ethyl esters, however these types of biodiesel are not covered by EN 14214 which applies only to methyl esters i.e. biodiesel produced using methanol.
This European Standard exists in three official versions - English, French, German. The current version of the standard was published in November 2008 and supersedes EN 14214:2003.
Differences exist between the national versions of the EN 14214 standard. These differences relate to cold weather requirements and are detailed in the national annex of each standard.
It is broadly based on the earlier German standard DIN 51606. The ASTM and EN standards both recommend very similar methods for the GC based analyses.
Blends are designated as "B" followed by a number indicating the percentage biodiesel. For example: B100 is pure biodiesel. B99 is 99% biodiesel, 1% petrodiesel. B20 is 20% biodiesel and 80% fossil diesel.
Specifications
See also
*
ASTM D6751 — the standard used in USA and Canada
*
EN
*
EN 590 EN 590 is a standard published by the European Committee for Standardization that describes the physical properties that all automotive diesel fuel must meet if it is to be sold in the European Union and several other European countries.
Based on ...
*
List of EN standards
European Standards (abbreviated EN, from the German name ("European Norm")) are technical standards drafted and maintained by CEN (European Committee for Standardization), CENELEC ( European Committee for Electrotechnical Standardization) and ETS ...
References
External links
CEN homepage
#14214
Biodiesel
{{engineering-stub