Diazomethane

Diazomethane is the chemical compound CH₂N₂, discovered by German chemist Hans von Pechmann in 1894. It is the simplest diazo compound. In the pure form at room temperature, it is an extremely sensitive explosive yellow gas; thus, it is almost universally used as a solution in diethyl ether. The compound is a popular methylating agent in the laboratory, but it is too hazardous to be employed on an industrial scale without special precautions. Use of diazomethane has been significantly reduced by the introduction of the safer and equivalent reagent trimethylsilyldiazomethane.

Use

For safety and convenience diazomethane is always prepared as needed as a solution in ether and used as such. It converts carboxylic acids to methyl esters and phenols into their methyl ethers. The reaction is thought to proceed via proton transfer from carboxylic acid to diazomethane to give methyldiazonium cation, which reacts with the carboxylate ion to give the methyl ester and nitrogen gas. Labeling studies indicate that the initial proton transfer is faster than the methyl transfer step. Since proton transfer is required for the reaction to proceed, this reaction is selective for the more acidic carboxylic acids (p''K''_a ~ 5) and phenols (p''K''_a ~ 10) over aliphatic alcohols (p''K''_a ~ 15).

In more specialized applications, diazomethane and homologues are used in Arndt-Eistert synthesis and the Büchner–Curtius–Schlotterbeck reaction for homologation.

Diazomethane reacts with alcohols or phenols in presence of boron trifluoride (BF₃) to give methyl ethers.

Diazomethane is also frequently used as a carbene source. It readily takes part in 1,3-dipolar cycloadditions.

Preparation

Diazomethane is prepared by hydrolysis of an ethereal solution of an ''N''-methyl nitrosamide with aqueous base. The traditional precursor is ''N''-nitroso-''N''-methylurea, but this compound is itself somewhat unstable, and nowadays compounds such as ''N''-methyl-''N-nitro-''N''-nitrosoguanidine (MNNG) and ''N''-methyl-''N''-nitroso-''p''-toluenesulfonamide (Diazald) are preferred.

:

CH₂N₂ reacts with basic solutions of D₂O to give the deuterated derivative CD₂N₂.

The concentration of CH₂N₂ can be determined in either of two convenient ways. It can be treated with an excess of benzoic acid in cold Et₂O. Unreacted benzoic acid is then back-titrated with standard NaOH. Alternatively, the concentration of CH₂N₂ in Et₂O can be determined spectrophotometrically at 410 nm where its extinction coefficient, ε, is 7.2.
The gas-phase concentration of diazomethane can be determined using photoacoustic spectroscopy.

Related compounds

Diazomethane is both isomeric and isoelectronic with the more stable cyanamide, but they cannot interconvert.
Many substituted derivatives of diazomethane have been prepared:
*The very stable (CF₃)₂CN₂ (2-diazo-1,1,1,3,3,3-hexafluoropropane; b.p. 12–13 °C),
*Ph₂CN₂ ( diazodiphenylmethane; m.p. 29–30 °C).
*(CH₃)₃SiCHN₂ ( trimethylsilyldiazomethane), which is commercially available as a solution and is as effective as CH₂N₂ for methylation.
* PhC(H)N₂, a red liquid b.p.< 25 °C at 0.1 mm Hg.

Safety

Diazomethane is toxic by inhalation or by contact with the skin or eyes (TLV 0.2 ppm). Symptoms include chest discomfort, headache, weakness and, in severe cases, collapse.Muir, GD (ed.) 1971, ''Hazards in the Chemical Laboratory'', The Royal Institute of Chemistry, London. Symptoms may be delayed. Deaths from diazomethane poisoning have been reported. In one instance a laboratory worker consumed a hamburger near a fumehood where he was generating a large quantity of diazomethane, and died four days later from fulminating pneumonia.LeWinn, E.B. "Diazomethane Poisoning: Report of a fatal case with autopsy", ''The American Journal of the Medical Sciences'', 1949, 218, 556-562. Like any other alkylating agent it is expected to be carcinogenic, but such concerns are overshadowed by its serious acute toxicity.

CH₂N₂ may explode in contact with sharp edges, such as ground-glass joints, even scratches in glassware. Glassware should be inspected before use and preparation should take place behind a blast shield. Specialized kits to prepare diazomethane with flame-polished joints are commercially available.

The compound explodes when heated beyond 100 °C, exposed to intense light, alkali metals, or calcium sulfate. Use of a blast shield is highly recommended while using this compound.

Proof-of-concept work has been done with microfluidics, in which continuous point-of-use synthesis from ''N''-methyl-''N''-nitrosourea and 0.93 M potassium hydroxide in water was followed by point-of-use conversion with benzoic acid, resulting in a 65% yield of the methyl benzoate ester within seconds at temperatures ranging from 0 to 50 °C. The yield was better than under capillary conditions; the microfluidics were credited with "suppression of hot spots, low holdup, isothermal conditions, and intensive mixing."

Isomers

The stable compound cyanamide, whose minor tautomer is carbodiimide, is an isomer of diazomethane. Less stable but still isolable isomers of diazomethane include the cyclic 3''H''-diazirine and isocyanoamine (isodiazomethane). In addition, the parent nitrilimine has been observed under matrix isolation conditions.

References

External links

MSDS diazomethaneSigmaaldrich technical bulletin
(PDF)

diazomethane applications and commercial availability of (Diazald) precursor


*[http://littlemsandsailing.wordpress.com/2011/05/01/identification-of-artifacts-in-diazoalkane-derivatization-reactions/ Identification of Artifacts (By-Products) in Diazomethane and Trimethylsilyldiazomethane Reactions]

{{Nitrogen compounds

Diazo compounds
Methylating agents
IARC Group 3 carcinogens
Reagents for organic chemistry
Explosive chemicals
1894 in science
Gases with color
Explosive gases
Organic compounds with 1 carbon atom