HOME
        TheInfoList



The Darne machine gun is a machine gun of French origin.

Development

The French gun-making company Darne, which became famous for its innovative shotguns, entered the world of military weapons in 1915, when it was contracted by French government to manufacture Lewis machine guns. In 1916 this same company announced development of its own machine gun of indigenous design. This belt-fed weapon was designed especially for rapid manufacturing techniques, and without any unnecessary refinements typical for most contemporary small arms. External finish and appearance of the Darne machine gun was crude, but worked well and its price was much lower than of any contemporary weapon of compatible combat characteristics. The French Army tested Darne machine guns during 1917/1918, but the Great War ended before production contracts could have been signed. Despite that fact, during the 1920s and 1930s Darne company managed to refine an aircraft variant of the machine gun to the point of its adoption by French and some other air forces for the role of an observers gun. However, there were many more variants of the Darne machine gun, although most others were certainly less successful. For example, in the 1920s and 1930s Darne offered a number of lightweight belt-fed machine guns for infantry or vehicle use. All these machine guns were made to the same concept of least expensive finish, and unlike its aircraft variants found no buyers during the inter-war period. It was eventually replaced by the MAC 1934 for Air Force use, although the French Navy continued to use them into World War II. Small numbers were also exported to Brazil, Spain, Yugoslavia, Italy and Lithuania, and captured French Darnes were used by German occupation forces for coastal defense. The initial guns were made by Darne in France but it appears that later production was outsourced to Spain, where it could be done more cheaply.

Overview

The Darne machine gun is gas operated, firing from open bolt in full automatic only. Breech is locked by tilting the rear part of the bolt up into the mortise cut in the roof of receiver (similar to the M1918 Browning Automatic Rifle). The Darne machine gun has an unusual belt feed between the gas piston and barrel, using the two-stage cartridge feed system (cartridge withdrawn from the belt to the rear, and then pushed forward into the barrel). The weapon usually has provisions to attach a belt box directly below the receiver to improve handling characteristics of the gun. Earlier versions of the Darne were chambered for the 8mm Lebel cartridge, but the weapon was quickly updated to the new 7.5mm French military cartridge. Some export guns were also made in 8mm Mauser, and various other cartridges.

Variants



Land Variant

Infantry versions of the Darne machine gun were normally fitted with a pistol grip and rifle-type trigger below receiver, and a wooden buttstock. Alternate variants featured skeletonized pistol grip made of metal and a top-folding shoulder stock, also made of metal. A folding bipod or a compact lightweight tripod was used to mount the Darne machine guns in ground roles.

Aircraft Variant

The aircraft variant equipped French aircraft until 1935 when it was replaced by the MAC 1934, except in naval aircraft. Often criticized for its lack of reliability in the aircraft role, as other similar rifle calibers, the 7.5 mm bullets proved to be too light for air combat in World War II.

Users

* * * - Designation: 6.5 or 8 mm leMG106 (f) * * * *

See also

*List of machine guns *List of secondary and special-issue World War II infantry weapons *List of aircraft of the French Air Force during World War II

References

{{DEFAULTSORT:Darne Machine Gun Category:Aircraft guns Category:Medium machine guns Category:Machine guns of France Category:World War II weapons of France Category:World War II machine guns Category:7.5×54mm French firearms