Crystal field theory

Crystal field theory (CFT) describes the breaking of degeneracies of electron orbital states, usually ''d'' or ''f'' orbitals, due to a static electric field produced by a surrounding charge distribution (anion neighbors). This theory has been used to describe various spectroscopies of transition metal coordination complexes, in particular optical spectra (colors). CFT successfully accounts for some magnetic properties, colors, hydration enthalpies, and spinel structures of transition metal complexes, but it does not attempt to describe bonding. CFT was developed by physicists Hans Bethe and John Hasbrouck van Vleck in the 1930s. CFT was subsequently combined with molecular orbital theory to form the more realistic and complex ligand field theory (LFT), which delivers insight into the process of chemical bonding in transition metal complexes.

Overview of crystal field theory

According to crystal field theory, the interaction between a transition metal and ligands arises from the attraction between the positively charged metal cation and the negative charge on the non-bonding electrons of the ligand. The theory is developed by considering energy changes of the five degenerate ''d''-orbitals upon being surrounded by an array of point charges consisting of the ligands. As a ligand approaches the metal ion, the electrons from the ligand will be closer to some of the ''d''-orbitals and farther away from others, causing a loss of degeneracy. The electrons in the ''d''-orbitals and those in the ligand repel each other due to repulsion between like charges. Thus the d-electrons closer to the ligands will have a higher energy than those further away which results in the ''d''-orbitals splitting in energy. This splitting is affected by the following factors:

*the nature of the metal ion.
*the metal's oxidation state. A higher oxidation state leads to a larger splitting relative to the spherical field.
*the arrangement of the ligands around the metal ion.
*the coordination number of the metal (i.e. tetrahedral, octahedral...)
*the nature of the ligands surrounding the metal ion. The stronger the effect of the ligands then the greater the difference between the high and low energy ''d'' groups.

The most common type of complex is octahedral, in which six ligands form the vertices of an octahedron around the metal ion. In octahedral symmetry the ''d''-orbitals split into two sets with an energy difference, Δ_oct (the crystal-field splitting parameter, also commonly denoted by 10''Dq'' for ten times the "differential of quanta"\
) where the ''d_xy'', ''d_xz'' and ''d_yz'' orbitals will be lower in energy than the ''d''_''z''² and ''d''_{''x''²-''y''²}, which will have higher energy, because the former group is farther from the ligands than the latter and therefore experiences less repulsion. The three lower-energy orbitals are collectively referred to as t_2g, and the two higher-energy orbitals as e_g. These labels are based on the theory of molecular symmetry: they are the names of irreducible representations of the octahedral point group, O_h.(see the O_h character table) Typical orbital energy diagrams are given below in the section High-spin and low-spin.

Tetrahedral complexes are the second most common type; here four ligands form a tetrahedron around the metal ion. In a tetrahedral crystal field splitting, the ''d''-orbitals again split into two groups, with an energy difference of Δ_tet. The lower energy orbitals will be ''d''_''z''² and ''d''_{''x''²-''y''²}, and the higher energy orbitals will be ''d''_''xy'', ''d''_''xz'' and ''d''_''yz'' - opposite to the octahedral case. Furthermore, since the ligand electrons in tetrahedral symmetry are not oriented directly towards the ''d''-orbitals, the energy splitting will be lower than in the octahedral case. Square planar and other complex geometries can also be described by CFT.

The size of the gap Δ between the two or more sets of orbitals depends on several factors, including the ligands and geometry of the complex. Some ligands always produce a small value of Δ, while others always give a large splitting. The reasons behind this can be explained by ligand field theory. The spectrochemical series is an empirically-derived list of ligands ordered by the size of the splitting Δ that they produce (small Δ to large Δ; see also this table):

I⁻ < Br⁻ < S²⁻ < SCN⁻ (S–bonded) < Cl⁻ < NO₃⁻ < N₃⁻ < F⁻ < OH⁻ < C₂O₄²⁻ < H₂O < NCS⁻ (N–bonded) < CH₃CN < py < NH₃ < en < 2,2'-bipyridine < phen < NO₂⁻ < PPh₃ < CN⁻ < CO.

It is useful to note that the ligands producing the most splitting are those that can engage in metal to ligand back-bonding.

The oxidation state of the metal also contributes to the size of Δ between the high and low energy levels. As the oxidation state increases for a given metal, the magnitude of Δ increases. A V³⁺ complex will have a larger Δ than a V²⁺ complex for a given set of ligands, as the difference in charge density allows the ligands to be closer to a V³⁺ ion than to a V²⁺ ion. The smaller distance between the ligand and the metal ion results in a larger Δ, because the ligand and metal electrons are closer together and therefore repel more.

High-spin and low-spin

Ligands which cause a large splitting Δ of the ''d''-orbitals are referred to as strong-field ligands, such as CN⁻ and CO from the spectrochemical series. In complexes with these ligands, it is unfavourable to put electrons into the high energy orbitals. Therefore, the lower energy orbitals are completely filled before population of the upper sets starts according to the Aufbau principle. Complexes such as this are called "low spin". For example, NO₂⁻ is a strong-field ligand and produces a large Δ. The octahedral ion e(NO₂)₆sup>3−, which has 5 ''d''-electrons, would have the octahedral splitting diagram shown at right with all five electrons in the ''t''_2''g'' level. This low spin state therefore does not follow Hund's rule.

Conversely, ligands (like I⁻ and Br⁻) which cause a small splitting Δ of the ''d''-orbitals are referred to as weak-field ligands. In this case, it is easier to put electrons into the higher energy set of orbitals than it is to put two into the same low-energy orbital, because two electrons in the same orbital repel each other. So, one electron is put into each of the five ''d''-orbitals in accord with Hund's rule, and "high spin" complexes are formed before any pairing occurs. For example, Br⁻ is a weak-field ligand and produces a small Δ_oct. So, the ion eBr₆sup>3−, again with five ''d''-electrons, would have an octahedral splitting diagram where all five orbitals are singly occupied.

In order for low spin splitting to occur, the energy cost of placing an electron into an already singly occupied orbital must be less than the cost of placing the additional electron into an e_''g'' orbital at an energy cost of Δ. As noted above, e_''g'' refers to the
''d''_''z''² and ''d''_{''x''²-''y''²} which are higher in energy than the t_2g in octahedral complexes. If the energy required to pair two electrons is greater than Δ, the energy cost of placing an electron in an e_''g'', high spin splitting occurs.

The crystal field splitting energy for tetrahedral metal complexes (four ligands) is referred to as Δ_tet, and is roughly equal to 4/9Δ_oct (for the same metal and same ligands). Therefore, the energy required to pair two electrons is typically higher than the energy required for placing electrons in the higher energy orbitals. Thus, tetrahedral complexes are usually high-spin.

The use of these splitting diagrams can aid in the prediction of magnetic properties of co-ordination compounds. A compound that has unpaired electrons in its splitting diagram will be paramagnetic and will be attracted by magnetic fields, while a compound that lacks unpaired electrons in its splitting diagram will be diamagnetic and will be weakly repelled by a magnetic field.

Crystal field stabilization energy

The crystal field stabilization energy (CFSE) is the stability that results from placing a transition metal ion in the crystal field generated by a set of ligands. It arises due to the fact that when the ''d''-orbitals are split in a ligand field (as described above), some of them become lower in energy than before with respect to a spherical field known as the barycenter in which all five ''d''-orbitals are degenerate. For example, in an octahedral case, the ''t_2g'' set becomes lower in energy than the orbitals in the barycenter. As a result of this, if there are any electrons occupying these orbitals, the metal ion is more stable in the ligand field relative to the barycenter by an amount known as the CFSE. Conversely, the ''e_g'' orbitals (in the octahedral case) are higher in energy than in the barycenter, so putting electrons in these reduces the amount of CFSE.

If the splitting of the ''d''-orbitals in an octahedral field is Δ_oct, the three ''t_2g'' orbitals are stabilized relative to the barycenter by ²/₅ Δ_oct, and the ''e_g'' orbitals are destabilized by ³/₅ Δ_oct. As examples, consider the two ''d''⁵ configurations shown further up the page. The low-spin (top) example has five electrons in the ''t_2g'' orbitals, so the total CFSE is 5 x ²/₅ Δ_oct = 2Δ_oct. In the high-spin (lower) example, the CFSE is (3 x ²/₅ Δ_oct) - (2 x ³/₅ Δ_oct) = 0 - in this case, the stabilization generated by the electrons in the lower orbitals is canceled out by the destabilizing effect of the electrons in the upper orbitals.

Optical properties

The optical properties (details of absorption and emission spectra) of many coordination complexes can be explained by Crystal Field Theory. Often, however, the deeper colors of metal complexes arise from more intense charge-transfer excitations.G. L. Miessler and D. A. Tarr “Inorganic Chemistry” 2nd Ed. (Prentice Hall 1999), p.379 .

Geometries and crystal field splitting diagrams

See also

*Schottky anomaly — low temperature spike in heat capacity seen in materials containing high-spin magnetic impurities, often due to crystal field splitting
*Ligand field theory
*Molecular orbital theory

References

Further reading

*
*
*
*
*
*

External links

Crystal-field Theory, Tight-binding Method, and Jahn-Teller Effect
in E. Pavarini, E. Koch, F. Anders, and M. Jarrell (eds.): Correlated Electrons: From Models to Materials, Jülich 2012,
Crystal field theory (draft article)
on Citizendium.org

{{Organometallics

Condensed matter physics
Inorganic chemistry
Chemical bonding
Coordination chemistry
Transition metals

de:Kristallfeld- und Ligandenfeldtheorie#Kristallfeldtheorie